ISO 12219-2:2012
Interior air of road vehicles — Part 2: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Bag method
ISO 12219-2:2012 specifies the sampling bag test method for measuring volatile organic compounds (VOCs), formaldehyde and other carbonyl compounds which may diffuse from vehicle interior parts into the air inside road vehicles. This method is intended for evaluating and screening new vehicle interior parts and materials such as seats, the instrument panel, ceiling materials and so on.
The test method specified in ISO 12219-2:2012 specifies a procedure for screening of VOCs, formaldehyde and other carbonyl compounds using sampling bags.
ISO 12219-2:2012 provides third party test laboratories and manufacturing industry with a cost-effective approach for: a) evaluating and screening prototype, "low-diffusion" materials or products during development; b) comparing diffusions from products within a range (e.g. different colours or patterns).
ISO 12219-2:2012 specifies the design, construction, performance, evaluation, and use of sampling bags for testing vapour-phase organic emissions diffused from vehicle interior parts.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$190.00 NZD
|
|
| HardCopy |
$238.00 NZD
|
|
| Networkable PDF |
Price varies
|
CVP_Secretariat_Loca
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Apparatus and materials
6 Test conditions
6.1 General
6.2 Test specimen size
6.3 Curing conditions (storage period and storage conditions)
6.4 Heating temperature
6.5 Heating time
6.6 Gas amount to be filled in a sampling bag
7 Verification of test conditions
7.1 Monitoring of test conditions
7.2 Recovery rate
8 Test method
8.1 Test equipment
8.2 Preparation for testing
8.3 Emission test
8.4 Gas collection
9 Analytical procedures
9.1 Analysis of VOCs
9.2 Analysis of formaldehyde and other carbonyl compounds
10 Calculation of sampling bag values
11 Test report
12 Quality assurance/quality control
Annex A (informative) General procedures for preparation and storage of test specimens
Annex B (informative) Additional information on test report and recovery rate
Bibliography
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 3580.1.1:2016
Methods for sampling and analysis of ambient air - Guide to siting air monitoring equipment -
AS/NZS 3580.10.1:2016
Methods for sampling and analysis of ambient air - Method 10.1: Determination of particulate matter - Deposited matter - Gravimetric method -
AS/NZS 3580.10.2:2013
Methods for sampling and analysis of ambient air - Method 10.2: Determination of particulate matter - Impinged matter - Gravimetric method -
AS/NZS 3580.11.1:2013
Methods for sampling and analysis of ambient air - Method 11.1: Determination of methane and non-methane organic compounds in ambient air - Direct-reading instrumental method
CVP_Secretariat_Loca
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Apparatus and materials
6 Test conditions
6.1 General
6.2 Test specimen size
6.3 Curing conditions (storage period and storage conditions)
6.4 Heating temperature
6.5 Heating time
6.6 Gas amount to be filled in a sampling bag
7 Verification of test conditions
7.1 Monitoring of test conditions
7.2 Recovery rate
8 Test method
8.1 Test equipment
8.2 Preparation for testing
8.3 Emission test
8.4 Gas collection
9 Analytical procedures
9.1 Analysis of VOCs
9.2 Analysis of formaldehyde and other carbonyl compounds
10 Calculation of sampling bag values
11 Test report
12 Quality assurance/quality control
Annex A (informative) General procedures for preparation and storage of test specimens
Annex B (informative) Additional information on test report and recovery rate
Bibliography