NZS 16110.1:2025
Hydrogen generators using fuel processing technologies Part 1: Safety
The objective of this standard is to specify requirements and recommendations relating to hydrogen generators using fuel-processing technologies so as to promote the safety of persons and property, consistency of control response, and ease of maintenance. It applies to packaged, self-contained, or factory-matched hydrogen generation systems with a capacity of less than 400 m3/h at 0°C and 101.325 kPa (herein referred to as hydrogen generators) that convert an input fuel to a hydrogen-rich stream of composition and conditions suitable for the type of device using the hydrogen (for example, a fuel cell power system or a hydrogen compression, storage, and delivery system).
This standard was prepared by the Standards New Zealand P3652 committee and has been reproduced as a modified adoption of ISO 16110-1:2007, Hydrogen generators using fuel processing technologies – Part 1: Safety.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$256.16 NZD
|
|
| HardCopy |
$284.63 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
NZS 16110.1 2025
Committee representation
Acknowledgement
Copyright
Referenced documents
Latest revisions
Review of standards
Preface
New Zealand national variations
NZS 16110.1 2025 Text
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
Electrical installations - Known as the Australian/New Zealand Wiring Rules
Electrical equipment for explosive atmospheres - Repair and overhaul
Safety of machinery - Electrical equipment of machines - Part 1204: General requirements
Safety of machinery, Part 2901: Electrical equipment of machines - Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV
Gas installations – Part 1: General installations
Explosive atmospheres - Part 0: Equipment - General requirements
Explosive atmospheres - Part 2: Equipment protection by pressurizedenclosure ‘p’
Explosive atmospheres - Part 20.1: Material characteristics for gas and vapour classification - Test methods and data
Explosive atmospheres - Part 29.3: Gas detectors - Guidance on functional safety of fixed gas detection systems
Explosive atmospheres - Part 30.1: Electrical resistance trace heating - General and testing requirements
Household and similar electrical appliances – Safety – Part 1: General requirements
Electromagnetic compatibility (EMC) - Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 75 A
Electromagnetic compatibility (EMC) – Part 6.1: Generic standards – Immunity standard for residential, commercial and light-industrial environments
Electromagnetic compatibility (EMC) Part 6.2: Generic standards — Immunity standard for industrial environments (IEC 61000-6-2:2016 RLV (ED. 3.0) MOD)
Electromagnetic compatibility (EMC), Part 6-3: Generic standards - Emission standard for equipment in residential environments
Electromagnetic compatibility (EMC) - Part 6.4: Generic standards - Emission standard for industrial environments
Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems (IEC 62061:2005 CSV (ED 1.2) MOD)
Explosive atmospheres, Part 10.1: Classification of areas - Explosive gas atmospheres
Failure modes and effects analysis (FMEA and FMECA)
Electromagnetic compatibility (EMC) – Part 3.2: Limits – Limits for harmonic current emissions (equipment input current ≤16 A per phase)
Electromagnetic compatibility (EMC), Part 3.3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection.
Electromagnetic compatibility (EMC), Part 4.16: Testing and measurement techniques—Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
Transportable gas cylinders – Compatibility of cylinder and valve materials with gas contents – Part 4: Test methods for selecting steels resistant to hydrogen embrittlement
Related Information
Similar Standards
-
12/3025963 DC
BS ISO 15399. Gaseous hydrogen. Cylinders and tubes for stationary storage
-
AS/NZS 4421:2011
Guard and patrol security services -
AS/NZS ISO 14175:2022
Welding consumables — Gases and gas mixtures for fusion welding and allied processes
-
BS 4105:1990
Specification for liquid carbon dioxide, industrial
NZS 16110.1 2025
Committee representation
Acknowledgement
Copyright
Referenced documents
Latest revisions
Review of standards
Preface
New Zealand national variations
NZS 16110.1 2025 Text
NZS 16110.1:2025
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.