ISO/IEC 24735:2021
Information technology — Office equipment — Method for measuring digital copying productivity
This document specifies a method for measuring the digital copying productivity of digital copying devices and multifunctional devices with various copying modes. It is applicable to digital copying devices and multifunctional devices equipped with automatic document feeder (ADF) and collating function. This document is intended to be used for black and white (B&W) as well as colour digital copying devices and multifunctional devices of any underlying marking technology. It allows comparison of the throughput copying rates for a machine operated in various available operating modes (simplex, duplex, size of substrates, 2-up, etc.) and various available digital image processing configurations. This document includes test files, test setup procedures, test procedures, and reporting requirements for digital copying productivity measurements.
This document is not intended to be used for devices which are not able to copy on a media size of A4/8,5” × 11”, devices that do not have an ADF, or devices which are not able to collate multiple copies of original prints from a test set.
This document is not intended to replace manufacturer's rated speeds.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$343.00 NZD
|
|
| HardCopy |
$389.00 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Test parameters and conditions
4.1 Copying device setup
4.2 Copying device condition
4.3 Sample size
4.4 Paper
4.5 Maintenance
4.6 Preparation of test targets (test charts)
4.7 Environment
4.8 Voltage
5 Test method
5.1 Overview
5.2 Test measurement procedure
5.2.1 Test setup
5.2.2 “1 set” test from ready
5.2.3 “1 set + 30 seconds” test from ready
5.2.4 “1 set + 4 minutes” test from ready
5.3 Test method process
5.3.1 Suggested flow chart
5.3.2 ±5 % consistency criteria
5.3.3 Estimating the set count
5.4 General performance test
5.4.1 Overview
5.4.2 Measurement of FSOT and ESAT
5.4.3 Measurement of EFTP
5.5 Feature performance test
5.5.1 Overview
5.5.2 Features setting conditions
5.5.3 Measurement of FSOT and ESAT
6 Calculations and treatment of data
6.1 Overview
6.2 General performance test
6.2.1 “1 set” test from ready
6.2.2 “1 set + 30 seconds” test from ready
6.2.3 “1 set + 4 minutes” test from ready
6.3 Feature performance test
6.3.1 “1 set” test from ready
6.3.2 “1 set + 30 seconds” test from ready
7 Presentation of results
7.1 Sharing testing and reports
7.2 General performance test
7.2.1 Overview
7.2.2 Minimum declaration
7.2.3 Summary report
7.2.4 Full report
7.3 Feature performance test
7.3.1 Overview
7.3.2 Summary report
7.3.3 Full report
Annex A (informative) Report presentation
Annex B (normative) Full detailed report example
Annex C (normative) Test targets for measurement of copying productivity
Annex D (normative) Procedure to establish ready delay time
Annex E (informative) Definitions of “FCOT” and “continuous copying speed”
Bibliography
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
BS EN 1010-1:2004+A1:2010
Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines, Common requirements
-
BS EN 13023:2003+A1:2010
Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment. Accuracy grades 2 and 3
-
BS EN 61966-7-1:2006
Multimedia systems and equipment. Colour measurement and management, Colour printers. Reflective prints. RGB inputs
-
BS EN ISO 12643-1:2023
Graphic technology. Safety requirements for graphic technology equipment and systems, Part 1: General requirements
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Test parameters and conditions
4.1 Copying device setup
4.2 Copying device condition
4.3 Sample size
4.4 Paper
4.5 Maintenance
4.6 Preparation of test targets (test charts)
4.7 Environment
4.8 Voltage
5 Test method
5.1 Overview
5.2 Test measurement procedure
5.2.1 Test setup
5.2.2 “1 set” test from ready
5.2.3 “1 set + 30 seconds” test from ready
5.2.4 “1 set + 4 minutes” test from ready
5.3 Test method process
5.3.1 Suggested flow chart
5.3.2 ±5 % consistency criteria
5.3.3 Estimating the set count
5.4 General performance test
5.4.1 Overview
5.4.2 Measurement of FSOT and ESAT
5.4.3 Measurement of EFTP
5.5 Feature performance test
5.5.1 Overview
5.5.2 Features setting conditions
5.5.3 Measurement of FSOT and ESAT
6 Calculations and treatment of data
6.1 Overview
6.2 General performance test
6.2.1 “1 set” test from ready
6.2.2 “1 set + 30 seconds” test from ready
6.2.3 “1 set + 4 minutes” test from ready
6.3 Feature performance test
6.3.1 “1 set” test from ready
6.3.2 “1 set + 30 seconds” test from ready
7 Presentation of results
7.1 Sharing testing and reports
7.2 General performance test
7.2.1 Overview
7.2.2 Minimum declaration
7.2.3 Summary report
7.2.4 Full report
7.3 Feature performance test
7.3.1 Overview
7.3.2 Summary report
7.3.3 Full report
Annex A (informative) Report presentation
Annex B (normative) Full detailed report example
Annex C (normative) Test targets for measurement of copying productivity
Annex D (normative) Procedure to establish ready delay time
Annex E (informative) Definitions of “FCOT” and “continuous copying speed”
Bibliography