ISO/IEC 18745-2:2021
Test methods for machine readable travel documents (MRTD) and associated devices — Part 2: Test methods for the contactless interface
This document defines the conformance test plan, based on ISO/IEC 10373-6, for the contactless interface of eMRTDs and eMRTD associated readers compliant with ICAO Doc 9303.
Application requirements for eMRTD and eMRTD reader are outside of the scope of this document and are defined in ICAO Doc 9303-10.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$338.63 NZD
|
|
| HardCopy |
$389.25 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Test methods for eMRTD
5.1 General test conditions
5.1.1 General
5.1.2 Test environment
5.1.3 Test conditions for PICC
5.1.4 Applicant information
5.1.5 Test report
5.2 Test of ISO/IEC 14443‑1 parameters
5.2.1 Antenna size and PICC Class 1 verification (optional)
5.2.2 Static electricity
5.2.3 Alternating magnetic field
5.3 Test of ISO/IEC 14443‑2 parameters
5.3.1 eMRTD transmission
5.3.2 Operating field strength
5.3.3 eMRTD reception
5.3.4 eMRTD maximum loading effect
5.3.5 eMRTD resonance frequency (optional)
5.3.6 eMRTD EMD level and low EMD time test (optional)
5.4 Test of ISO/IEC 14443‑3 and ISO/IEC 14443‑4 parameters
5.5 List of the test command sequences
5.5.1 General
5.5.2 Test commands for eMRTD supporting only BAC
5.5.3 Test commands for eMRTD supporting PACE
5.6 Functionality check test
5.6.1 General
5.6.2 Optional procedure 1: Application functionality check test
5.6.3 Optional procedure 2: Electrical functionality check test
6 Test methods for eMRTD reader
6.1 General test conditions
6.1.1 General
6.1.2 Test environment
6.1.3 Test conditions for PCD
6.1.4 Applicant information
6.1.5 Test report
6.1.6 Definition of test positions
6.2 Test of ISO/IEC 14443‑1 parameters
6.2.1 Alternating magnetic field
6.3 Test of ISO/IEC 14443‑2 parameters
6.3.1 Carrier frequency
6.3.2 eMRTD reader field strength
6.3.3 Modulation index and waveform
6.3.4 Load modulation reception
6.3.5 eMRTD reader EMD immunity test (optional)
6.3.6 eMRTD reader EMD recovery test (optional)
6.4 Test of ISO/IEC 14443‑3 and ISO/IEC 14443‑4 parameters
6.5 List of test command sequences
6.5.1 General
6.5.2 Test commands
6.5.3 Default test command sequence
6.5.4 Test_command_sequence_1
6.5.5 Test_command_sequence_2
6.6 Measurement positions
7 Specific access control test sequences
7.1 General
7.2 List of the test command sequences with EAC for eMRTD
7.2.1 General
7.2.2 Test commands for eMRTD supporting EAC
7.2.3 Test commands for eMRTD supporting PACE and EAC
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
BS 7227:1990
Procedures for the application of ISO 7812 to allocate UK Issuer Identification Numbers (UK IINs) for use on identification cards
-
BS EN 1038:1996
Identification card systems. Telecommunications applications. Integrated circuit(s) card payphone
-
BS EN 1332-1:2009
Identification card systems. Human-machine interface, Design principles for the user interface
-
BS EN 1332-2:1998
Identification card systems. Man-machine interface, Dimensions and location of a tactile identifier for ID-1 cards
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Test methods for eMRTD
5.1 General test conditions
5.1.1 General
5.1.2 Test environment
5.1.3 Test conditions for PICC
5.1.4 Applicant information
5.1.5 Test report
5.2 Test of ISO/IEC 14443‑1 parameters
5.2.1 Antenna size and PICC Class 1 verification (optional)
5.2.2 Static electricity
5.2.3 Alternating magnetic field
5.3 Test of ISO/IEC 14443‑2 parameters
5.3.1 eMRTD transmission
5.3.2 Operating field strength
5.3.3 eMRTD reception
5.3.4 eMRTD maximum loading effect
5.3.5 eMRTD resonance frequency (optional)
5.3.6 eMRTD EMD level and low EMD time test (optional)
5.4 Test of ISO/IEC 14443‑3 and ISO/IEC 14443‑4 parameters
5.5 List of the test command sequences
5.5.1 General
5.5.2 Test commands for eMRTD supporting only BAC
5.5.3 Test commands for eMRTD supporting PACE
5.6 Functionality check test
5.6.1 General
5.6.2 Optional procedure 1: Application functionality check test
5.6.3 Optional procedure 2: Electrical functionality check test
6 Test methods for eMRTD reader
6.1 General test conditions
6.1.1 General
6.1.2 Test environment
6.1.3 Test conditions for PCD
6.1.4 Applicant information
6.1.5 Test report
6.1.6 Definition of test positions
6.2 Test of ISO/IEC 14443‑1 parameters
6.2.1 Alternating magnetic field
6.3 Test of ISO/IEC 14443‑2 parameters
6.3.1 Carrier frequency
6.3.2 eMRTD reader field strength
6.3.3 Modulation index and waveform
6.3.4 Load modulation reception
6.3.5 eMRTD reader EMD immunity test (optional)
6.3.6 eMRTD reader EMD recovery test (optional)
6.4 Test of ISO/IEC 14443‑3 and ISO/IEC 14443‑4 parameters
6.5 List of test command sequences
6.5.1 General
6.5.2 Test commands
6.5.3 Default test command sequence
6.5.4 Test_command_sequence_1
6.5.5 Test_command_sequence_2
6.6 Measurement positions
7 Specific access control test sequences
7.1 General
7.2 List of the test command sequences with EAC for eMRTD
7.2.1 General
7.2.2 Test commands for eMRTD supporting EAC
7.2.3 Test commands for eMRTD supporting PACE and EAC