ISO/IEC 18047-63:2023
Information technology — Radio frequency identification device conformance test methods — Part 63: Test methods for air interface communications at 860 MHz to 960 MHz
This document specficies test methods for determining the conformance of radio frequency identification (RFID) devices (tags and interrogators) for item management with the specifications given in ISO/IEC 18000-63.
This document does not apply to the testing of conformity with regulatory or similar requirements.
The test methods specify only the verification of the mandatory functions and any optional functions which are implemented. This can, in appropriate circumstances, be supplemented by further, application-specific functionality criteria that are not available in the general case.
The interrogator and tag conformance parameters in this document are the following:
— type-specific conformance parameters including nominal values and tolerances;
— parameters that directly affect system functionality and inter-operability.
Parameters that are already included in regulatory test requirements are not included in this document.
Unless otherwise specified, the tests in this document are intended to be applied exclusively to RFID tags and interrogators defined in ISO/IEC 18000-63.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$429.00 NZD
|
|
| HardCopy |
$473.00 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols, abbreviated terms and notations
3.1 Terms and definitions
3.2 Symbols
3.3 Abbreviated terms
3.4 Notation
4 Default conditions applicable to the test methods
4.1 Test environment
4.2 Pre-conditioning
4.2.1 General
4.2.2 Default tolerance
4.2.3 Noise floor at test location
4.2.4 Total measurement uncertainty
5 Conformance
6 Conformance tests for ISO/IEC 18000-63:2021, Clause 6
7 Conformance tests for ISO/IEC 18000-63:2021, 7.1 to 7.4
7.1 Tag functional tests
7.1.1 General
7.1.2 Battery-assisted passive tag persistence time test
8 Conformance tests for ISO/IEC 18000-63:2021, 7.5
8.1 General
8.2 Functional tests of interrogator
8.2.1 Interrogator RF envelope parameters
8.2.2 Interrogator activation minimum dwell time, TA
8.2.3 Interrogator link timing T2
8.2.4 Interrogator link timing T3
8.2.5 Interrogator link timing T4
8.3 Functional tests of tag
8.3.1 Tag demodulation capability
8.3.2 Tag link frequency tolerance and variation
8.3.3 Tag link timing, T1
8.3.4 Tag link timing T2
8.3.5 Tag activation time maximum, TA
8.3.6 Tag stateful hibernate timer
9 Conformance tests for ISO/IEC 18000-63:2021, Clause 8
9.1 General
9.2 Simple sensor test
9.2.1 Purpose
9.2.2 Procedure
9.2.3 Test report
9.3 Full-function sensor test
9.3.1 Purpose
9.3.2 Procedure
9.3.3 Test report
9.4 Snapshot sensor test
9.4.1 Purpose
9.4.2 Procedure
9.4.3 Test report
Annex A (normative) Setup of test equipment
Bibliography
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS ISO 28560.1:2023
Information and documentation – RFID in libraries, Part 1: Data elements and general guidelines for implementation
-
AS/NZS ISO 28560.2:2023
Information and documentation - RFID in libraries, Part 2: Encoding of RFID data elements based on rules from ISO/IEC 15962
-
BS 5464-1:1977
Optical character recognition, Character set OCR-A. Shapes and dimensions of the printed image
-
BS 5464-3:1983
Optical character recognition, Method of coding machine readable characters (MICR and OCR) for information processing
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols, abbreviated terms and notations
3.1 Terms and definitions
3.2 Symbols
3.3 Abbreviated terms
3.4 Notation
4 Default conditions applicable to the test methods
4.1 Test environment
4.2 Pre-conditioning
4.2.1 General
4.2.2 Default tolerance
4.2.3 Noise floor at test location
4.2.4 Total measurement uncertainty
5 Conformance
6 Conformance tests for ISO/IEC 18000-63:2021, Clause 6
7 Conformance tests for ISO/IEC 18000-63:2021, 7.1 to 7.4
7.1 Tag functional tests
7.1.1 General
7.1.2 Battery-assisted passive tag persistence time test
8 Conformance tests for ISO/IEC 18000-63:2021, 7.5
8.1 General
8.2 Functional tests of interrogator
8.2.1 Interrogator RF envelope parameters
8.2.2 Interrogator activation minimum dwell time, TA
8.2.3 Interrogator link timing T2
8.2.4 Interrogator link timing T3
8.2.5 Interrogator link timing T4
8.3 Functional tests of tag
8.3.1 Tag demodulation capability
8.3.2 Tag link frequency tolerance and variation
8.3.3 Tag link timing, T1
8.3.4 Tag link timing T2
8.3.5 Tag activation time maximum, TA
8.3.6 Tag stateful hibernate timer
9 Conformance tests for ISO/IEC 18000-63:2021, Clause 8
9.1 General
9.2 Simple sensor test
9.2.1 Purpose
9.2.2 Procedure
9.2.3 Test report
9.3 Full-function sensor test
9.3.1 Purpose
9.3.2 Procedure
9.3.3 Test report
9.4 Snapshot sensor test
9.4.1 Purpose
9.4.2 Procedure
9.4.3 Test report
Annex A (normative) Setup of test equipment
Bibliography