ISO/IEC 15505:2003
Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Specification, functional model and information flows - Message Waiting Indication supplementary service
ISO/IEC 15505:2003 specifies supplementary service Message Waiting Indication (SS-MWI), which is related, but not limited, to various basic services supported by Private Integrated Services Networks (PISNs). Basic services are specified in ISO/IEC 11574.
This supplementary service MWI enables a Served User to be sent a Message Waiting Indication and also enables this Message Waiting Indication to be cancelled.
Service specifications are produced in three stages, according to the method described in ETS 300 387. ISO/IEC 15505:2003 contains the stage 1 and stage 2 specifications of SS-MWI. The stage 1 specification (clause 6) specifies the supplementary service as seen by users of PISNs. The stage 2 specification (clause 7) specifies the functional entities involved in the supplementary service and the information flows between them.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$179.13 NZD
|
|
| HardCopy |
$214.78 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Conformance
3 Normative references
4 Definitions
4.1 External definitions
4.2 Other definitions
4.2.1 Served User
4.2.2 Message Centre
4.2.3 Message Waiting Indication
5 List of acronyms
6 SS-MWI stage 1 specification
6.1 Description
6.1.1 General description
6.1.2 Qualifications on applicability to telecommunication services
6.2 Procedures
6.2.1 Provision / withdrawal
6.2.2 Normal procedures
6.2.2.1 Activation, deactivation and interrogation
6.2.2.2 Invocation and operation
6.2.3 Exceptional procedures
6.2.3.1 Activation, deactivation and interrogation
6.2.3.2 Invocation and operation
6.3 Interactions with other Supplementary Services / Additional Network Features
6.3.1 Advice of Charge (AOC)
6.3.2 Call Deflection (CD)
6.3.3 Call Forwarding Unconditional (CFU)
6.3.4 Call Forwarding Busy (CFB)
6.3.5 Call Forwarding No Reply (CFNR)
6.3.6 Call Interception (CINT)
6.3.7 Call Intrusion (CI)
6.3.8 Call Offer (CO)
6.3.9 Call Transfer (CT)
6.3.10 Calling/Connected Line Identification Restriction (CLIR)
6.3.11 Calling/Connected Name Identification Restriction (CNIR)
6.3.12 Calling Line Identification Presentation (CLIP)
6.3.13 Calling Name Identification Presentation (CNIP)
6.3.14 Connected Line Identification Presentation (COLP)
6.3.15 Connected Name Identification Presentation (CONP)
6.3.16 Completion of Calls to Busy Subscribers (CCBS)
6.3.17 Completion of Calls on No Reply (CCNR)
6.3.18 Do Not Disturb (DND)
6.3.19 Do Not Disturb Override (DNDO)
6.3.20 Path Replacement (PR)
6.3.21 Recall (RE)
6.3.22 Route Restriction Class (RRC)
6.3.23 Wireless Terminal Location Registration (WTLR)
6.3.24 Wireless Terminal Mobility Incoming Call (WTMI)
6.3.25 Wireless Terminal Mobility Outgoing Call (WTMO)
6.3.26 Authentication of a WTM user (WTAT)
6.3.27 Authentication of the PISN (WTAN)
6.4 Interworking considerations
6.5 Overall SDL
7 SS-MWI stage 2 specification
7.1 Functional model
7.1.1 Functional model description
7.1.2 Description of Functional Entities
7.1.2.1 Message Centre control entity, FE1
7.1.2.2 Served User's control entity, FE2
7.1.3 Relationship of functional model to Basic Call functional model
7.2 Information flows
7.2.1 Definition of information flows
7.2.1.1 ra_MWI_Activate
7.2.1.2 ra_MWI_Deactivate
7.2.1.3 ra_MWI_Interrogate
7.2.2 Relationship of information flows to Basic Call information flows
7.2.3 Information flow sequences
7.2.3.1 Activation of SS-MWI
7.2.3.2 Deactivation of SS-MWI
7.2.3.3 Interrogation of SS-MWI
7.3 Functional Entity actions
7.3.1 Functional Entity actions of FE1
7.3.2 Functional Entity actions of FE2
7.4 Functional Entity behaviour
7.4.1 Behaviour of FE1
7.4.2 Behaviour of FE2
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
BS 7940:1999
Analogue PSTN terminal support interface
-
BS EN 28877:1994
Information technology. Telecommunications and information exchange between systems. Interface connector and contact assignments for ISDN Basic Access Interface located at reference points S and T
-
BS ISO/IEC 13241:1997
Information technology. Telecommunications and information exchange between systems. Private integrated services network. Inter-exchange signalling protocol. Route restriction class additional network feature
-
BS ISO/IEC 13242:1997
Information technology. Telecommunications and information exchange between systems. Private integrated services network. Specification, functional model and information flows. Route restriction class additional network feature
Foreword
Introduction
1 Scope
2 Conformance
3 Normative references
4 Definitions
4.1 External definitions
4.2 Other definitions
4.2.1 Served User
4.2.2 Message Centre
4.2.3 Message Waiting Indication
5 List of acronyms
6 SS-MWI stage 1 specification
6.1 Description
6.1.1 General description
6.1.2 Qualifications on applicability to telecommunication services
6.2 Procedures
6.2.1 Provision / withdrawal
6.2.2 Normal procedures
6.2.2.1 Activation, deactivation and interrogation
6.2.2.2 Invocation and operation
6.2.3 Exceptional procedures
6.2.3.1 Activation, deactivation and interrogation
6.2.3.2 Invocation and operation
6.3 Interactions with other Supplementary Services / Additional Network Features
6.3.1 Advice of Charge (AOC)
6.3.2 Call Deflection (CD)
6.3.3 Call Forwarding Unconditional (CFU)
6.3.4 Call Forwarding Busy (CFB)
6.3.5 Call Forwarding No Reply (CFNR)
6.3.6 Call Interception (CINT)
6.3.7 Call Intrusion (CI)
6.3.8 Call Offer (CO)
6.3.9 Call Transfer (CT)
6.3.10 Calling/Connected Line Identification Restriction (CLIR)
6.3.11 Calling/Connected Name Identification Restriction (CNIR)
6.3.12 Calling Line Identification Presentation (CLIP)
6.3.13 Calling Name Identification Presentation (CNIP)
6.3.14 Connected Line Identification Presentation (COLP)
6.3.15 Connected Name Identification Presentation (CONP)
6.3.16 Completion of Calls to Busy Subscribers (CCBS)
6.3.17 Completion of Calls on No Reply (CCNR)
6.3.18 Do Not Disturb (DND)
6.3.19 Do Not Disturb Override (DNDO)
6.3.20 Path Replacement (PR)
6.3.21 Recall (RE)
6.3.22 Route Restriction Class (RRC)
6.3.23 Wireless Terminal Location Registration (WTLR)
6.3.24 Wireless Terminal Mobility Incoming Call (WTMI)
6.3.25 Wireless Terminal Mobility Outgoing Call (WTMO)
6.3.26 Authentication of a WTM user (WTAT)
6.3.27 Authentication of the PISN (WTAN)
6.4 Interworking considerations
6.5 Overall SDL
7 SS-MWI stage 2 specification
7.1 Functional model
7.1.1 Functional model description
7.1.2 Description of Functional Entities
7.1.2.1 Message Centre control entity, FE1
7.1.2.2 Served User's control entity, FE2
7.1.3 Relationship of functional model to Basic Call functional model
7.2 Information flows
7.2.1 Definition of information flows
7.2.1.1 ra_MWI_Activate
7.2.1.2 ra_MWI_Deactivate
7.2.1.3 ra_MWI_Interrogate
7.2.2 Relationship of information flows to Basic Call information flows
7.2.3 Information flow sequences
7.2.3.1 Activation of SS-MWI
7.2.3.2 Deactivation of SS-MWI
7.2.3.3 Interrogation of SS-MWI
7.3 Functional Entity actions
7.3.1 Functional Entity actions of FE1
7.3.2 Functional Entity actions of FE2
7.4 Functional Entity behaviour
7.4.1 Behaviour of FE1
7.4.2 Behaviour of FE2