ISO/IEC 11801-2:2017
Information technology — Generic cabling for customer premises — Part 2: Office premises
ISO/IEC 11801-2:2017(E) This document specifies generic cabling within and between the buildings of office premises, or office spaces within other types of building. Additionally those premises can include industrial spaces (for which generic cabling is specified in ISO/IEC 11801-3) or data centre spaces (for which generic cabling is specified in ISO/IEC 11801-5).
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$256.00 NZD
|
|
| HardCopy |
$303.00 NZD
|
|
| Networkable PDF |
Price varies
|
CONTENTS
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms
4 Conformance
5 Structure of the generic cabling system
5.1 General
5.2 Functional elements
5.3 General structure and hierarchy
5.3.1 General
5.3.2 Campus and building backbone cabling subsystem
5.3.3 Horizontal cabling subsystem
5.3.4 Design objectives
5.4 Interconnection of subsystems
5.4.1 General
5.4.2 Centralized cabling architecture
5.5 Accommodation of functional elements
5.6 Dimensioning and configuring
5.6.1 Distributors
5.6.2 Connecting hardware
5.6.3 Work area cords and equipment cords
5.6.4 Patch cords and jumpers
5.6.5 Telecommunications outlet
5.6.6 Consolidation point
5.6.7 Telecommunications rooms and equipment rooms
5.6.8 External services cabling
6 Channel performance requirements
6.1 General
6.2 Environmental performance
6.3 Transmission performance
6.3.1 General
8 Reference implementations
8.1 General
8.2 Balanced cabling
8.2.1 General
8.2.2 Horizontal cabling
8.2.3 Campus and building backbone cabling system
8.3 Optical fibre cabling
8.3.1 General
8.3.2 Component selection
8.3.3 Dimensions
9 Cable requirements
9.1 General
9.2 Balanced cables
9.3 Optical fibre cables
10 Connecting hardware requirements
10.1 General requirements
10.2 Connecting hardware for balanced cabling
10.2.1 General requirements
10.2.2 Electrical, mechanical and environmental performance
10.3 Connecting hardware for optical fibre cabling
10.3.1 General requirements
10.3.2 Optical, mechanical and environmental performance
11 Cord requirements
11.1 Jumpers
11.2 Balanced cords
11.2.1 General
11.2.2 Additional requirements for work area cords
11.3 Optical fibre cords
Bibliography
Figures
Figure 1 – Relationships between the generic cabling documents produced by ISO/IEC JTC 1/SC 25
Figure 2 – Structure of generic cabling
Figure 3 – Hierarchical structure of generic cabling
Figure 4 – Structures for centralized generic cabling
Figure 5 – Accommodation of functional elements
Figure 6 – Example of a generic cabling system with combined BD and FD
Figure 7 – Inter-relationship of functional elements in an installation with redundancy
Figure 8 –Channel, permanent link and CP link
Figure 9 – Example of a system showing the location of cabling interfaces and extent of associated channels
Figure 10 – Horizontal cabling models
Figure 11 – Combined backbone/horizontal channels
Tables
Table 1 – Maximum channel lengths
Table 2 – Length assumptions used in the mathematical modelling of balanced horizontal cabling
Table 3 – Horizontal link length equations
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 11801.1:2019
Information technology - Generic cabling for customer premises Part 1: General requirements (ISO/IEC 11801-1:2017, MOD) -
AS/NZS 14763.2:2020
Information technology - Implementation and operation of customer premises cabling, Part 2: Planning and installation
-
AS/NZS 14763.3:2017
Information technology - Implementation and operation of customer premises cabling - Part 3: Testing of optical fibre cabling -
AS/NZS 14763.3:2017 A1
Information technology - Implementation and operation of customer premises cabling - Part 3: Testing of optical fibre cabling - Amendment 1:2018
CONTENTS
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms
4 Conformance
5 Structure of the generic cabling system
5.1 General
5.2 Functional elements
5.3 General structure and hierarchy
5.3.1 General
5.3.2 Campus and building backbone cabling subsystem
5.3.3 Horizontal cabling subsystem
5.3.4 Design objectives
5.4 Interconnection of subsystems
5.4.1 General
5.4.2 Centralized cabling architecture
5.5 Accommodation of functional elements
5.6 Dimensioning and configuring
5.6.1 Distributors
5.6.2 Connecting hardware
5.6.3 Work area cords and equipment cords
5.6.4 Patch cords and jumpers
5.6.5 Telecommunications outlet
5.6.6 Consolidation point
5.6.7 Telecommunications rooms and equipment rooms
5.6.8 External services cabling
6 Channel performance requirements
6.1 General
6.2 Environmental performance
6.3 Transmission performance
6.3.1 General
8 Reference implementations
8.1 General
8.2 Balanced cabling
8.2.1 General
8.2.2 Horizontal cabling
8.2.3 Campus and building backbone cabling system
8.3 Optical fibre cabling
8.3.1 General
8.3.2 Component selection
8.3.3 Dimensions
9 Cable requirements
9.1 General
9.2 Balanced cables
9.3 Optical fibre cables
10 Connecting hardware requirements
10.1 General requirements
10.2 Connecting hardware for balanced cabling
10.2.1 General requirements
10.2.2 Electrical, mechanical and environmental performance
10.3 Connecting hardware for optical fibre cabling
10.3.1 General requirements
10.3.2 Optical, mechanical and environmental performance
11 Cord requirements
11.1 Jumpers
11.2 Balanced cords
11.2.1 General
11.2.2 Additional requirements for work area cords
11.3 Optical fibre cords
Bibliography
Figures
Figure 1 – Relationships between the generic cabling documents produced by ISO/IEC JTC 1/SC 25
Figure 2 – Structure of generic cabling
Figure 3 – Hierarchical structure of generic cabling
Figure 4 – Structures for centralized generic cabling
Figure 5 – Accommodation of functional elements
Figure 6 – Example of a generic cabling system with combined BD and FD
Figure 7 – Inter-relationship of functional elements in an installation with redundancy
Figure 8 –Channel, permanent link and CP link
Figure 9 – Example of a system showing the location of cabling interfaces and extent of associated channels
Figure 10 – Horizontal cabling models
Figure 11 – Combined backbone/horizontal channels
Tables
Table 1 – Maximum channel lengths
Table 2 – Length assumptions used in the mathematical modelling of balanced horizontal cabling
Table 3 – Horizontal link length equations