ISO 9328-2:2018
Steel flat products for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy steels with specified elevated temperature properties
ISO 9328-2:2018 specifies the technical delivery conditions for plates and strip for pressure equipment made of non-alloy and alloy steels as specified in Tables A.1 and B.1. The requirements and definitions of ISO 9328‑1 also apply to this document.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$301.00 NZD
|
|
| HardCopy |
$346.00 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and designation
4.1 Classification
4.2 Designation
5 Information to be supplied by the purchaser
5.1 Mandatory information
5.2 Options
5.3 Example for ordering
6 Requirements
6.1 Steelmaking process
6.2 Delivery condition
6.3 Chemical composition
6.4 Mechanical properties
6.5 Surface condition
6.6 Internal soundness
6.7 Weldability
6.8 Dimensions and tolerances on dimensions
6.9 Calculation of mass
6.10 Resistance to hydrogen-induced cracking
6.11 Embrittlement of CrMo steels
7 Inspection
7.1 Types of inspection and inspection documents
7.2 Tests to be carried out
7.3 Retests, sorting and reprocessing
8 Sampling
9 Test methods
10 Marking
Annex A (normative) Chemical composition and mechanical properties of products based on European standards
Annex B (normative) Chemical composition and mechanical properties of products based on ASTM/ASME or JIS standards
Annex C (informative) Steel designations in accordance with this document and designation of comparable steel grades in national or regional standards
Annex D (informative) Guidelines for heat treatment
Annex E (informative) Critical time-temperature parameter Pcrit. and possible combinations of stress relieving temperature and holding time
Annex F (informative) Reference data relating to strength for 1 % (plastic) creep strain and creep rupture
Annex G (informative) Evaluation of resistance to hydrogen-induced cracking
Annex H (informative) Step cooling test
Bibliography
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 1365:1996
Tolerances for flat-rolled steel products
-
AS/NZS 1365:1996A1
Tolerances for flat-rolled steel products: Amendment 1 -
AS/NZS 1594:2025
Hot-rolled steel flat products
-
AS/NZS 1595:1998
Cold-rolled, unalloyed, steel sheet and strip
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and designation
4.1 Classification
4.2 Designation
5 Information to be supplied by the purchaser
5.1 Mandatory information
5.2 Options
5.3 Example for ordering
6 Requirements
6.1 Steelmaking process
6.2 Delivery condition
6.3 Chemical composition
6.4 Mechanical properties
6.5 Surface condition
6.6 Internal soundness
6.7 Weldability
6.8 Dimensions and tolerances on dimensions
6.9 Calculation of mass
6.10 Resistance to hydrogen-induced cracking
6.11 Embrittlement of CrMo steels
7 Inspection
7.1 Types of inspection and inspection documents
7.2 Tests to be carried out
7.3 Retests, sorting and reprocessing
8 Sampling
9 Test methods
10 Marking
Annex A (normative) Chemical composition and mechanical properties of products based on European standards
Annex B (normative) Chemical composition and mechanical properties of products based on ASTM/ASME or JIS standards
Annex C (informative) Steel designations in accordance with this document and designation of comparable steel grades in national or regional standards
Annex D (informative) Guidelines for heat treatment
Annex E (informative) Critical time-temperature parameter Pcrit. and possible combinations of stress relieving temperature and holding time
Annex F (informative) Reference data relating to strength for 1 % (plastic) creep strain and creep rupture
Annex G (informative) Evaluation of resistance to hydrogen-induced cracking
Annex H (informative) Step cooling test
Bibliography