ISO 8098:2014
Cycles — Safety requirements for bicycles for young children
ISO 8098:2014 specifies safety and performance requirements and test methods for the design, assembly and testing of fully assembled bicycles and sub-assemblies for young children. It also provides guidelines for instructions on the use and care of the bicycles.
ISO 8098:2014 is applicable to bicycles with a maximum saddle height of more than 435 mm and less than 635 mm, propelled by a transmitted drive to the rear wheel.
ISO 8098:2014 is not applicable to special bicycles intended for performing stunts (e.g. BMX bicycles).
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$141.75 NZD
|
|
| HardCopy |
$194.63 NZD
|
|
| Networkable PDF |
Price varies
|
Section sec_1
Section sec_2
Section sec_3
Section sec_3.1
Section sec_3.2
Section sec_3.3
Section sec_3.4
Section sec_3.5
Section sec_3.6
Section sec_3.7
Section sec_3.8
Section sec_3.9
Section sec_3.10
Section sec_3.11
Section sec_3.12
Section sec_3.13
Section sec_3.14
Section sec_3.15
Section sec_3.16
Section sec_3.17
Section sec_4
Section sec_4.1
Section sec_4.1.1
Section sec_4.1.2
Section sec_4.1.3
Section sec_4.1.4
Section sec_4.1.5
Section sec_4.1.6
Section sec_4.1.7
Section sec_4.2
Section sec_4.3
Section sec_4.4
Section sec_4.4.1
Section sec_4.4.2
Section sec_4.4.3
Section sec_4.4.4
Section sec_4.4.5
Section sec_4.5
Section sec_4.6
Section sec_4.7
Section sec_4.7.1
Section sec_4.7.2
Section sec_4.7.2.1
Section sec_4.7.2.2
Section sec_4.7.2.2.1
Table tab_a
Figure fig_1
Section sec_4.7.2.2.2
Table tab_b
Figure fig_2
Figure fig_3
Section sec_4.7.2.3
Table tab_c
Figure fig_4
Section sec_4.7.3
Section sec_4.7.4
Section sec_4.7.4.1
Section sec_4.7.4.2
Section sec_4.7.5
Section sec_4.7.6
Section sec_4.7.7
Section sec_4.7.7.1
Section sec_4.7.7.2
Section sec_4.7.7.3
Section sec_4.7.7.4
Table tab_d
Figure fig_5
Section sec_4.7.8
Section sec_4.7.8.1
Table tab_1
Section sec_4.7.8.2
Table tab_e
Figure fig_6
Section sec_4.7.8.3
Section sec_4.7.8.4
Section sec_4.8
Section sec_4.8.1
Section sec_4.8.2
Section sec_4.8.2.1
Section sec_4.8.2.2
Section sec_4.8.2.3
Table tab_f
Figure fig_7
Section sec_4.8.3
Section sec_4.8.4
Section sec_4.8.5
Section sec_4.8.5.1
Section sec_4.8.5.1.1
Section sec_4.8.5.1.2
Table tab_g
Figure fig_8
Section sec_4.8.5.2
Section sec_4.8.5.2.1
Section sec_4.8.5.2.2
Table tab_h
Figure fig_9
Section sec_4.8.5.3
Section sec_4.8.5.3.1
Section sec_4.8.5.3.2
Table tab_i
Figure fig_10
Section sec_4.8.5.4
Section sec_4.8.5.4.1
Section sec_4.8.5.4.2
Table tab_j
Figure fig_11
Section sec_4.8.6
Section sec_4.8.6.1
Section sec_4.8.6.2
Section sec_4.8.6.3
Figure fig_12
Table tab_k
Figure fig_13
Section sec_4.8.6.4
Section sec_4.8.6.5
Section sec_4.9
Section sec_4.9.1
Section sec_4.9.1.1
Section sec_4.9.1.2
Table tab_l
Figure fig_14
Section sec_4.9.2
Section sec_4.9.2.1
Section sec_4.9.2.2
Table tab_m
Figure fig_15
Section sec_4.10
Section sec_4.10.1
Section sec_4.10.2
Section sec_4.10.2.1
Section sec_4.10.2.2
Table tab_n
Figure fig_16
Section sec_4.11
Section sec_4.11.1
Section sec_4.11.1.1
Section sec_4.11.1.2
Section sec_4.11.1.3
Table tab_o
Figure fig_17
Section sec_4.11.2
Section sec_4.11.3
Section sec_4.11.3.1
Section sec_4.11.3.2
Table tab_p
Figure fig_18
Section sec_4.11.4
Section sec_4.11.4.1
Section sec_4.11.4.2
Section sec_4.11.4.2.1
Section sec_4.11.4.2.2
Section sec_4.11.4.3
Section sec_4.11.4.3.1
Section sec_4.11.4.3.2
Section sec_4.11.4.4
Section sec_4.11.4.4.1
Section sec_4.11.4.4.2
Section sec_4.12
Section sec_4.12.1
Section sec_4.12.2
Section sec_4.13
Section sec_4.13.1
Section sec_4.13.1.1
Section sec_4.13.1.2
Section sec_4.13.2
Section sec_4.13.2.1
Section sec_4.13.2.2
Table tab_q
Figure fig_19
Section sec_4.13.3
Section sec_4.13.3.1
Section sec_4.13.3.2
Figure fig_20
Figure fig_21
Section sec_4.13.4
Section sec_4.13.4.1
Section sec_4.13.4.2
Table tab_r
Figure fig_22
Section sec_4.13.5
Section sec_4.13.5.1
Section sec_4.13.5.2
Section sec_4.13.5.2.1
Section sec_4.13.5.2.2
Section sec_4.13.5.2.3
Section sec_4.13.6
Section sec_4.13.6.1
Section sec_4.13.6.2
Table tab_s
Figure fig_23
Section sec_4.14
Section sec_4.14.1
Section sec_4.14.2
Section sec_4.14.3
Section sec_4.14.3.1
Section sec_4.14.3.2
Table tab_t
Figure fig_24
Section sec_4.14.4
Section sec_4.14.4.1
Section sec_4.14.4.2
Figure fig_25
Section sec_4.14.5
Section sec_4.14.5.1
Section sec_4.14.5.2
Section sec_4.14.5.3
Table tab_u
Figure fig_26
Section sec_4.15
Table tab_v
Figure fig_27
Section sec_4.16
Section sec_4.16.1
Section sec_4.16.2
Section sec_4.16.3
Section sec_4.16.3.1
Section sec_4.16.3.2
Table tab_w
Figure fig_28
Section sec_4.16.4
Section sec_4.16.4.1
Section sec_4.16.4.2
Table tab_x
Figure fig_29
Section sec_4.17
Section sec_4.18
Section sec_4.18.1
Section sec_4.18.2
Section sec_4.18.3
Section sec_4.19
Section sec_5
Section sec_6
Section sec_6.1
Section sec_6.2
Section sec_6.2.1
Section sec_6.2.2
Annex sec_A
Table tab_y
Figure fig_A.1
Annex sec_B
Reference ref_1
Reference ref_2
Reference ref_3
Reference ref_4
Reference ref_5
Reference ref_6
Reference ref_7
Reference ref_8
Reference ref_9
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements and test methods
4.1 Brake tests and strength tests — Special requirements
4.2 Toxicity
4.3 Sharp edges
4.4 Security and strength of safety-related fasteners
4.5 Crack detection methods
4.6 Protrusions
4.7 Brakes
4.8 Steering
4.9 Frames
4.10 Front fork
4.11 Wheels
4.12 Rims, tyres and tubes
4.13 Pedals and pedal/crank drive system
4.14 Saddles and seat-posts
4.15 Chain-guard
4.16 Stabilizers
4.17 Luggage carriers
4.18 Lighting systems and reflectors
4.19 Warning device
5 Instructions
6 Marking
6.1 Requirement
6.2 Durability test
Annex A (informative) Steering geometry
Annex B (informative) Verification of free fall velocity
Bibliography
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 1927:2010
Pedal bicycles - Safety requirements
-
AS/NZS 1927:2010 A1
Pedal bicycles - Safety requirements: Amendment 1:2014 -
AS/NZS 2088:2013
Prams and strollers - Safety requirements -
AS/NZS 2172:2013
Cots for household use – Safety requirements
Section sec_1
Section sec_2
Section sec_3
Section sec_3.1
Section sec_3.2
Section sec_3.3
Section sec_3.4
Section sec_3.5
Section sec_3.6
Section sec_3.7
Section sec_3.8
Section sec_3.9
Section sec_3.10
Section sec_3.11
Section sec_3.12
Section sec_3.13
Section sec_3.14
Section sec_3.15
Section sec_3.16
Section sec_3.17
Section sec_4
Section sec_4.1
Section sec_4.1.1
Section sec_4.1.2
Section sec_4.1.3
Section sec_4.1.4
Section sec_4.1.5
Section sec_4.1.6
Section sec_4.1.7
Section sec_4.2
Section sec_4.3
Section sec_4.4
Section sec_4.4.1
Section sec_4.4.2
Section sec_4.4.3
Section sec_4.4.4
Section sec_4.4.5
Section sec_4.5
Section sec_4.6
Section sec_4.7
Section sec_4.7.1
Section sec_4.7.2
Section sec_4.7.2.1
Section sec_4.7.2.2
Section sec_4.7.2.2.1
Table tab_a
Figure fig_1
Section sec_4.7.2.2.2
Table tab_b
Figure fig_2
Figure fig_3
Section sec_4.7.2.3
Table tab_c
Figure fig_4
Section sec_4.7.3
Section sec_4.7.4
Section sec_4.7.4.1
Section sec_4.7.4.2
Section sec_4.7.5
Section sec_4.7.6
Section sec_4.7.7
Section sec_4.7.7.1
Section sec_4.7.7.2
Section sec_4.7.7.3
Section sec_4.7.7.4
Table tab_d
Figure fig_5
Section sec_4.7.8
Section sec_4.7.8.1
Table tab_1
Section sec_4.7.8.2
Table tab_e
Figure fig_6
Section sec_4.7.8.3
Section sec_4.7.8.4
Section sec_4.8
Section sec_4.8.1
Section sec_4.8.2
Section sec_4.8.2.1
Section sec_4.8.2.2
Section sec_4.8.2.3
Table tab_f
Figure fig_7
Section sec_4.8.3
Section sec_4.8.4
Section sec_4.8.5
Section sec_4.8.5.1
Section sec_4.8.5.1.1
Section sec_4.8.5.1.2
Table tab_g
Figure fig_8
Section sec_4.8.5.2
Section sec_4.8.5.2.1
Section sec_4.8.5.2.2
Table tab_h
Figure fig_9
Section sec_4.8.5.3
Section sec_4.8.5.3.1
Section sec_4.8.5.3.2
Table tab_i
Figure fig_10
Section sec_4.8.5.4
Section sec_4.8.5.4.1
Section sec_4.8.5.4.2
Table tab_j
Figure fig_11
Section sec_4.8.6
Section sec_4.8.6.1
Section sec_4.8.6.2
Section sec_4.8.6.3
Figure fig_12
Table tab_k
Figure fig_13
Section sec_4.8.6.4
Section sec_4.8.6.5
Section sec_4.9
Section sec_4.9.1
Section sec_4.9.1.1
Section sec_4.9.1.2
Table tab_l
Figure fig_14
Section sec_4.9.2
Section sec_4.9.2.1
Section sec_4.9.2.2
Table tab_m
Figure fig_15
Section sec_4.10
Section sec_4.10.1
Section sec_4.10.2
Section sec_4.10.2.1
Section sec_4.10.2.2
Table tab_n
Figure fig_16
Section sec_4.11
Section sec_4.11.1
Section sec_4.11.1.1
Section sec_4.11.1.2
Section sec_4.11.1.3
Table tab_o
Figure fig_17
Section sec_4.11.2
Section sec_4.11.3
Section sec_4.11.3.1
Section sec_4.11.3.2
Table tab_p
Figure fig_18
Section sec_4.11.4
Section sec_4.11.4.1
Section sec_4.11.4.2
Section sec_4.11.4.2.1
Section sec_4.11.4.2.2
Section sec_4.11.4.3
Section sec_4.11.4.3.1
Section sec_4.11.4.3.2
Section sec_4.11.4.4
Section sec_4.11.4.4.1
Section sec_4.11.4.4.2
Section sec_4.12
Section sec_4.12.1
Section sec_4.12.2
Section sec_4.13
Section sec_4.13.1
Section sec_4.13.1.1
Section sec_4.13.1.2
Section sec_4.13.2
Section sec_4.13.2.1
Section sec_4.13.2.2
Table tab_q
Figure fig_19
Section sec_4.13.3
Section sec_4.13.3.1
Section sec_4.13.3.2
Figure fig_20
Figure fig_21
Section sec_4.13.4
Section sec_4.13.4.1
Section sec_4.13.4.2
Table tab_r
Figure fig_22
Section sec_4.13.5
Section sec_4.13.5.1
Section sec_4.13.5.2
Section sec_4.13.5.2.1
Section sec_4.13.5.2.2
Section sec_4.13.5.2.3
Section sec_4.13.6
Section sec_4.13.6.1
Section sec_4.13.6.2
Table tab_s
Figure fig_23
Section sec_4.14
Section sec_4.14.1
Section sec_4.14.2
Section sec_4.14.3
Section sec_4.14.3.1
Section sec_4.14.3.2
Table tab_t
Figure fig_24
Section sec_4.14.4
Section sec_4.14.4.1
Section sec_4.14.4.2
Figure fig_25
Section sec_4.14.5
Section sec_4.14.5.1
Section sec_4.14.5.2
Section sec_4.14.5.3
Table tab_u
Figure fig_26
Section sec_4.15
Table tab_v
Figure fig_27
Section sec_4.16
Section sec_4.16.1
Section sec_4.16.2
Section sec_4.16.3
Section sec_4.16.3.1
Section sec_4.16.3.2
Table tab_w
Figure fig_28
Section sec_4.16.4
Section sec_4.16.4.1
Section sec_4.16.4.2
Table tab_x
Figure fig_29
Section sec_4.17
Section sec_4.18
Section sec_4.18.1
Section sec_4.18.2
Section sec_4.18.3
Section sec_4.19
Section sec_5
Section sec_6
Section sec_6.1
Section sec_6.2
Section sec_6.2.1
Section sec_6.2.2
Annex sec_A
Table tab_y
Figure fig_A.1
Annex sec_B
Reference ref_1
Reference ref_2
Reference ref_3
Reference ref_4
Reference ref_5
Reference ref_6
Reference ref_7
Reference ref_8
Reference ref_9
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements and test methods
4.1 Brake tests and strength tests — Special requirements
4.2 Toxicity
4.3 Sharp edges
4.4 Security and strength of safety-related fasteners
4.5 Crack detection methods
4.6 Protrusions
4.7 Brakes
4.8 Steering
4.9 Frames
4.10 Front fork
4.11 Wheels
4.12 Rims, tyres and tubes
4.13 Pedals and pedal/crank drive system
4.14 Saddles and seat-posts
4.15 Chain-guard
4.16 Stabilizers
4.17 Luggage carriers
4.18 Lighting systems and reflectors
4.19 Warning device
5 Instructions
6 Marking
6.1 Requirement
6.2 Durability test
Annex A (informative) Steering geometry
Annex B (informative) Verification of free fall velocity
Bibliography