ISO 80369-7:2016
Small-bore connectors for liquids and gases in healthcare applications — Part 7: Connectors for intravascular or hypodermic applications
ISO 80369-7:2016 specifies dimensions and requirements for the design and functional performance of small-bore connectors intended to be used for connections in intravascular applications or hypodermic connections in hypodermic applications of medical devices and accessories.
EXAMPLES Hypodermic syringes and needles or intravascular (IV) cannulae with male and female luer slip connectors and luer lock connectors.
NOTE 1 The luer connector was originally designed for use at pressures up to 300 kPa.
ISO 80369-7:2016 does not specify requirements for the medical devices or accessories that use these connectors. Such requirements are given in particular International Standards for specific medical devices or accessories.
ISO 80369-7:2016 does not specify requirements for the following small-bore connectors, which are specified in other International Standards:
- haemodialyser, haemodiafilter and haemofilter blood compartment ports (ISO 8637 and applicable portion of ISO 8638 referencing blood compartment ports);
- haemodialysis, haemodiafiltration and haemofiltration equipment connectors (ISO 8637);
- infusion system closure piercing connectors (ISO 8536‑4).
NOTE 2 Manufacturers are encouraged to incorporate the small-bore connectors specified in this part of ISO 80369 into medical devices or accessories, even if currently not required by the relevant particular medical device standards. It is expected that when the relevant particular medical device standards are revised, requirements for small-bore connectors, as specified in ISO 80369, will be included.
NOTE 3 ISO 80369‑1:2010, 5.8, specifies alternative methods of compliance with ISO 80369‑1:2010, for small-bore connectors intended for use with intravascular applications or hypodermic application medical devices or accessories, which do not comply with this part of ISO 80369.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$118.26 NZD
|
|
| HardCopy |
$152.17 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 * Scope
2 Normative references
3 Terms and definitions
4 General requirements
4.1 General requirements for luer connectors
4.2 Material used for luer connectors
4.3 Type tests
5 * Dimensional requirements for luer connectors
6 Performance requirements
6.1 Fluid leakage
6.1.1 Fluid leakage requirement
6.1.2 Leakage by pressure decay
6.1.3 Positive pressure liquid leakage
6.2 Sub-atmospheric pressure air leakage
6.3 Stress cracking
6.4 Resistance to separation from axial load
6.5 Resistance to separation from unscrewing
6.6 Resistance to overriding
Annex A (informative) Rationale and guidance
Annex B (normative) luer connectors
Annex C (normative) Reference connectors
Annex D (informative) Assessment of medical devices and their attributes with connections within this application
Annex E (informative) Summary of the usability requirements for luer connectors for intravascular or hypodermic applications
Annex F (informative) Summary of luer connector design requirements for intravascular or hypodermic applications
Annex G (informative) Summary of assessment of the design of the luer connector for intravascular or hypodermic applications
Annex H (informative) Reference to the essential principles
Annex I (informative) Terminology — Alphabetized index of defined terms
Bibliography
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS IEC 60601.2.16:2015
Medical electrical equipment - Part 2.16: Particular requirements for the basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment -
BS 1263-1:1989
Reusable hypodermic syringes for medical use., Specification for dimensions of all-glass and metal-and-glass syringes
-
BS 6196:1989
Specification for sterile epidural catheters and introducer needles for single use
-
BS EN 12439:1999
Sterile rectal catheters for single use
Foreword
Introduction
1 * Scope
2 Normative references
3 Terms and definitions
4 General requirements
4.1 General requirements for luer connectors
4.2 Material used for luer connectors
4.3 Type tests
5 * Dimensional requirements for luer connectors
6 Performance requirements
6.1 Fluid leakage
6.1.1 Fluid leakage requirement
6.1.2 Leakage by pressure decay
6.1.3 Positive pressure liquid leakage
6.2 Sub-atmospheric pressure air leakage
6.3 Stress cracking
6.4 Resistance to separation from axial load
6.5 Resistance to separation from unscrewing
6.6 Resistance to overriding
Annex A (informative) Rationale and guidance
Annex B (normative) luer connectors
Annex C (normative) Reference connectors
Annex D (informative) Assessment of medical devices and their attributes with connections within this application
Annex E (informative) Summary of the usability requirements for luer connectors for intravascular or hypodermic applications
Annex F (informative) Summary of luer connector design requirements for intravascular or hypodermic applications
Annex G (informative) Summary of assessment of the design of the luer connector for intravascular or hypodermic applications
Annex H (informative) Reference to the essential principles
Annex I (informative) Terminology — Alphabetized index of defined terms
Bibliography