ISO 6185-3:2014
Inflatable boats — Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater
ISO 6185-3:2014 specifies the minimum safety characteristics required for the design, materials to use, manufacture and testing of inflatable boats and rigid inflatable boats with a hull length in accordance with ISO 8666 less than 8 m with a motor power rating of 15 kW and greater.
ISO 6185:2014 is applicable to the following types of boats intended for use within the operating temperatures of -20 °C to +60 °C:
- Type VII: Powered Boats (with power ≥ 15 kW) fitted with a buoyancy tube attached to the port and starboard sides, suitable for navigation in conditions of Design Categories C and D and capable of installing motor power rating of 15 kW and greater.
- Type VIII: Powered Boats (with power > 75 kW) fitted with a buoyancy tube attached to the port and starboard sides, suitable for navigation in conditions of Design Category B capable of installing motor power rating of 75 kW and greater.
ISO 6185:2014 excludes single-chambered boats and boats made from unsupported materials, and is not applicable to aquatic toys and inflatable liferafts.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$141.75 NZD
|
|
| HardCopy |
$194.63 NZD
|
|
| Networkable PDF |
Price varies
|
Figure fig_1
Section sec_1
Section sec_2
Section sec_3
Section sec_3.1
Section sec_3.2
Section sec_3.3
Section sec_3.4
Section sec_3.5
Section sec_3.6
Section sec_3.7
Section sec_3.8
Section sec_3.9
Section sec_3.10
Section sec_3.11
Section sec_3.12
Section sec_3.12.1
Section sec_3.12.2
Section sec_3.12.3
Section sec_4
Table tab_1
Section sec_5
Section sec_5.1
Section sec_5.2
Section sec_5.2.1
Section sec_5.2.2
Section sec_5.2.2.1
Section sec_5.2.2.2
Table tab_2
Section sec_5.2.2.3
Section sec_5.2.2.4
Section sec_5.2.2.5
Section sec_5.2.2.6
Section sec_5.2.2.7
Section sec_5.3
Section sec_5.3.1
Section sec_5.3.2
Section sec_5.3.3
Section sec_5.4
Section sec_5.5
Section sec_5.6
Section sec_5.7
Section sec_5.7.1
Section sec_5.7.2
Section sec_5.7.2.1
Section sec_5.7.2.2
Section sec_5.7.2.3
Section sec_5.7.2.4
Section sec_6
Section sec_6.1
Section sec_6.2
Section sec_6.2.1
Section sec_6.2.2
Section sec_6.3
Section sec_6.3.1
Section sec_6.3.2
Section sec_6.4
Section sec_6.4.1
Section sec_6.4.2
Section sec_6.5
Section sec_6.5.1
Section sec_6.5.2
Section sec_6.5.3
Section sec_6.5.4
Section sec_6.5.4.1
Section sec_6.5.4.2
Section sec_6.5.5
Section sec_6.6
Section sec_6.6.1
Section sec_6.7
Section sec_6.8
Section sec_6.9
Section sec_6.10
Section sec_6.11
Section sec_6.12
Section sec_6.12.1
Section sec_6.12.2
Section sec_6.13
Section sec_6.14
Section sec_6.15
Section sec_6.16
Section sec_6.17
Section sec_6.18
Section sec_6.19
Section sec_6.20
Section sec_7
Section sec_7.1
Section sec_7.2
Section sec_7.3
Section sec_7.3.1
Table tab_3
Table tab_a
Figure fig_2
Section sec_7.3.2
Section sec_7.4
Section sec_7.4.1
Table tab_4
Section sec_7.4.2
Section sec_7.4.3
Section sec_7.5
Table tab_5
Section sec_7.6
Section sec_7.7
Section sec_7.7.1
Section sec_7.7.2
Section sec_7.7.2.1
Section sec_7.7.2.2
Section sec_7.7.2.3
Section sec_7.7.2.4
Section sec_7.8
Section sec_7.9
Section sec_7.10
Section sec_7.11
Section sec_7.12
Section sec_7.13
Section sec_7.13.1
Section sec_7.13.2
Section sec_7.13.3
Table tab_c
Figure fig_3
Section sec_7.13.4
Section sec_7.14
Figure fig_4
Section sec_8
Section sec_8.1
Table tab_6
Section sec_8.2
Section sec_8.2.1
Section sec_8.2.2
Section sec_8.3
Section sec_8.3.1
Section sec_8.3.2
Section sec_8.3.2.1
Section sec_8.3.2.2
Section sec_8.3.2.3
Section sec_8.4
Section sec_8.5
Section sec_8.5.1
Section sec_8.5.2
Section sec_8.6
Table tab_d
Figure fig_5
Section sec_8.7
Section sec_8.7.1
Section sec_8.7.2
Section sec_8.7.3
Section sec_8.7.4
Section sec_9
Section sec_10
Section sec_11
Annex sec_A
Table tab_e
Figure fig_A.1
Annex sec_B
Table tab_f
Figure fig_B.1
Reference ref_1
Reference ref_2
Reference ref_3
Reference ref_4
Reference ref_5
Reference ref_6
Reference ref_7
Reference ref_8
Reference ref_9
Reference ref_10
Reference ref_11
Reference ref_12
Reference ref_13
Reference ref_14
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Structural Materials
5.1 General
5.2 Materials making up the flexible floor and buoyancy tube
5.3 Wood
5.4 Metal parts
5.5 Glass-reinforced plastics
5.6 Other materials
5.7 Buoyant material used in foam filled buoyancy tubes
6 Functional components
6.1 Conditioning
6.2 Fittings bonded to the flexible parts of the boat
6.3 Manual lifting and carrying devices
6.4 Valves (if applicable)
6.5 Rowlocks and oars
6.6 Transom (where applicable)
6.7 Hull drainage
6.8 Remote steering system (where offered as standard or optional equipment)
6.9 Towing, anchoring and mooring devices
6.10 Seating and attachment systems (where offered as a standard or optional equipment)
6.11 Electrical installations (where offered as standard or optional equipment))
6.12 Engine and engine spaces
6.13 Fuel systems
6.14 Ventilation of petrol engine and/or petrol tank compartments (where applicable)
6.15 Devices for lifting the boat (if applicable)
6.16 Fire protection (if applicable)
6.17 Openings in hull, deck or superstructure
6.18 Gas systems
6.19 Navigational lights
6.20 Discharge prevention
7 Safety requirements of the completed boat
7.1 Maximum Load Capacity
7.2 Crew limit (CL)
7.3 Static stability
7.4 Buoyancy requirements
7.5 Compartmentation
7.6 Nominal pressures (inflatable buoyancy tubes)
7.7 Strength of the inflatable buoyancy tube
7.8 Maximum motor power
7.9 Man overboard prevention and recovery
7.10 Field of vision from the helm position
7.11 Provision for (a) liferaft(s)
7.12 Strength of the Rigid Structure (type test only)
7.13 Strength of principal fitted accessories
7.14 Safety Sign
8 Performance
8.1 General
8.2 Drop test (Ribs only)
8.3 In-water performance
8.4 Rowing test (where applicable, see 6.5)
8.5 Watertightness test (not applicable to open floor, self-bailing boats)
8.6 Manoeuvring-speed test
8.7 Self-Draining (type VIII Boats only)
9 Builder’s plate(s)
10 Owner’s manual
11 Standard equipment
Annex A (informative) General arrangement of a typical Type VII boat
Annex B (informative) General arrangement of a typical Type VIlI boat
Bibliography
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
BS 7161:1990
Specification for propeller shaft ends and bosses for inboard-engined pleasure craft
-
BS 7852:1997
Code of practice for design of canoes and kayaks
-
BS EN 14144:2003
Lifebuoys. Requirements, tests
-
BS EN 14145:2003
Holders for lifebuoys
Figure fig_1
Section sec_1
Section sec_2
Section sec_3
Section sec_3.1
Section sec_3.2
Section sec_3.3
Section sec_3.4
Section sec_3.5
Section sec_3.6
Section sec_3.7
Section sec_3.8
Section sec_3.9
Section sec_3.10
Section sec_3.11
Section sec_3.12
Section sec_3.12.1
Section sec_3.12.2
Section sec_3.12.3
Section sec_4
Table tab_1
Section sec_5
Section sec_5.1
Section sec_5.2
Section sec_5.2.1
Section sec_5.2.2
Section sec_5.2.2.1
Section sec_5.2.2.2
Table tab_2
Section sec_5.2.2.3
Section sec_5.2.2.4
Section sec_5.2.2.5
Section sec_5.2.2.6
Section sec_5.2.2.7
Section sec_5.3
Section sec_5.3.1
Section sec_5.3.2
Section sec_5.3.3
Section sec_5.4
Section sec_5.5
Section sec_5.6
Section sec_5.7
Section sec_5.7.1
Section sec_5.7.2
Section sec_5.7.2.1
Section sec_5.7.2.2
Section sec_5.7.2.3
Section sec_5.7.2.4
Section sec_6
Section sec_6.1
Section sec_6.2
Section sec_6.2.1
Section sec_6.2.2
Section sec_6.3
Section sec_6.3.1
Section sec_6.3.2
Section sec_6.4
Section sec_6.4.1
Section sec_6.4.2
Section sec_6.5
Section sec_6.5.1
Section sec_6.5.2
Section sec_6.5.3
Section sec_6.5.4
Section sec_6.5.4.1
Section sec_6.5.4.2
Section sec_6.5.5
Section sec_6.6
Section sec_6.6.1
Section sec_6.7
Section sec_6.8
Section sec_6.9
Section sec_6.10
Section sec_6.11
Section sec_6.12
Section sec_6.12.1
Section sec_6.12.2
Section sec_6.13
Section sec_6.14
Section sec_6.15
Section sec_6.16
Section sec_6.17
Section sec_6.18
Section sec_6.19
Section sec_6.20
Section sec_7
Section sec_7.1
Section sec_7.2
Section sec_7.3
Section sec_7.3.1
Table tab_3
Table tab_a
Figure fig_2
Section sec_7.3.2
Section sec_7.4
Section sec_7.4.1
Table tab_4
Section sec_7.4.2
Section sec_7.4.3
Section sec_7.5
Table tab_5
Section sec_7.6
Section sec_7.7
Section sec_7.7.1
Section sec_7.7.2
Section sec_7.7.2.1
Section sec_7.7.2.2
Section sec_7.7.2.3
Section sec_7.7.2.4
Section sec_7.8
Section sec_7.9
Section sec_7.10
Section sec_7.11
Section sec_7.12
Section sec_7.13
Section sec_7.13.1
Section sec_7.13.2
Section sec_7.13.3
Table tab_c
Figure fig_3
Section sec_7.13.4
Section sec_7.14
Figure fig_4
Section sec_8
Section sec_8.1
Table tab_6
Section sec_8.2
Section sec_8.2.1
Section sec_8.2.2
Section sec_8.3
Section sec_8.3.1
Section sec_8.3.2
Section sec_8.3.2.1
Section sec_8.3.2.2
Section sec_8.3.2.3
Section sec_8.4
Section sec_8.5
Section sec_8.5.1
Section sec_8.5.2
Section sec_8.6
Table tab_d
Figure fig_5
Section sec_8.7
Section sec_8.7.1
Section sec_8.7.2
Section sec_8.7.3
Section sec_8.7.4
Section sec_9
Section sec_10
Section sec_11
Annex sec_A
Table tab_e
Figure fig_A.1
Annex sec_B
Table tab_f
Figure fig_B.1
Reference ref_1
Reference ref_2
Reference ref_3
Reference ref_4
Reference ref_5
Reference ref_6
Reference ref_7
Reference ref_8
Reference ref_9
Reference ref_10
Reference ref_11
Reference ref_12
Reference ref_13
Reference ref_14
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Structural Materials
5.1 General
5.2 Materials making up the flexible floor and buoyancy tube
5.3 Wood
5.4 Metal parts
5.5 Glass-reinforced plastics
5.6 Other materials
5.7 Buoyant material used in foam filled buoyancy tubes
6 Functional components
6.1 Conditioning
6.2 Fittings bonded to the flexible parts of the boat
6.3 Manual lifting and carrying devices
6.4 Valves (if applicable)
6.5 Rowlocks and oars
6.6 Transom (where applicable)
6.7 Hull drainage
6.8 Remote steering system (where offered as standard or optional equipment)
6.9 Towing, anchoring and mooring devices
6.10 Seating and attachment systems (where offered as a standard or optional equipment)
6.11 Electrical installations (where offered as standard or optional equipment))
6.12 Engine and engine spaces
6.13 Fuel systems
6.14 Ventilation of petrol engine and/or petrol tank compartments (where applicable)
6.15 Devices for lifting the boat (if applicable)
6.16 Fire protection (if applicable)
6.17 Openings in hull, deck or superstructure
6.18 Gas systems
6.19 Navigational lights
6.20 Discharge prevention
7 Safety requirements of the completed boat
7.1 Maximum Load Capacity
7.2 Crew limit (CL)
7.3 Static stability
7.4 Buoyancy requirements
7.5 Compartmentation
7.6 Nominal pressures (inflatable buoyancy tubes)
7.7 Strength of the inflatable buoyancy tube
7.8 Maximum motor power
7.9 Man overboard prevention and recovery
7.10 Field of vision from the helm position
7.11 Provision for (a) liferaft(s)
7.12 Strength of the Rigid Structure (type test only)
7.13 Strength of principal fitted accessories
7.14 Safety Sign
8 Performance
8.1 General
8.2 Drop test (Ribs only)
8.3 In-water performance
8.4 Rowing test (where applicable, see 6.5)
8.5 Watertightness test (not applicable to open floor, self-bailing boats)
8.6 Manoeuvring-speed test
8.7 Self-Draining (type VIII Boats only)
9 Builder’s plate(s)
10 Owner’s manual
11 Standard equipment
Annex A (informative) General arrangement of a typical Type VII boat
Annex B (informative) General arrangement of a typical Type VIlI boat
Bibliography