ISO 606:2015
Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
ISO 606:2015 specifies the characteristics of short-pitch precision roller and bush chains with associated sprockets suitable for the mechanical transmission of power and allied applications. It covers dimensions, tolerances, length measurement, preloading, minimum tensile strengths and minimum dynamic strength.
Although Clause 5 applies to chain sprockets for cycles and motor cycles, this International Standard is not applicable to their chains, which are covered by ISO 9633 and ISO 10190, respectively.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$301.00 NZD
|
|
| HardCopy |
$346.00 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Normative references
3 Chains
3.1 Nomenclature of assemblies and components
3.2 Designation
3.3 Dimensions
3.4 Performance requirements
3.4.1 General
3.4.2 Tensile testing
3.4.3 Preloading
3.4.4 Length validation
3.4.5 Dynamic testing
3.5 Marking
3.6 Cranked links
4 Attachments
4.1 Nomenclature
4.2 General
4.3 Designation
4.4 Dimensions
4.5 Manufacture
4.6 Marking
5 Chain sprockets
5.1 General
5.2 Nomenclature
5.3 Diametral dimensions of sprocket rim
5.3.1 Nomenclature
5.3.2 Dimensions
5.4 Sprocket tooth gap forms
5.4.1 Nomenclature
5.4.2 Dimensions
5.5 Tooth heights and tip diameters
5.5.1 Nomenclature
5.5.2 Dimensions
5.6 Sprocket rim profiles
5.6.1 Nomenclature
5.6.2 Dimensions
5.7 Radial run-out
5.8 Axial run-out (wobble)
5.9 Pitch accuracy of sprocket teeth
5.10 Number of teeth
5.11 Bore tolerance
5.12 Marking
Annex A (normative) Pitch circle diameters
Annex B (informative) Equivalent chain designations
Annex C (informative) Method of calculating chain minimum dynamic strength
Annex D (informative) Method of determining maximum test force Fmax when conducting dynamic strength conformance test
Annex E (informative) Examples of methods used to avoid an excessive increase in the rate of stress during the tensile test
Annex F (informative) Methods used to approximate the minimum dynamic test values for multiplex chains
Bibliography
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
BS 3551:1962
Specification for alloy steel shackles
-
BS 6710:1987
Specification for dimensions of chain wheel tooth forming tools
-
BS ISO 1275:2006
Double-pitch precision roller chains, attachments and associated chain sprockets for transmission and conveyors
-
BS ISO 13203:2006
Chains, sprockets and accessories. List of equivalent terms
Foreword
Introduction
1 Scope
2 Normative references
3 Chains
3.1 Nomenclature of assemblies and components
3.2 Designation
3.3 Dimensions
3.4 Performance requirements
3.4.1 General
3.4.2 Tensile testing
3.4.3 Preloading
3.4.4 Length validation
3.4.5 Dynamic testing
3.5 Marking
3.6 Cranked links
4 Attachments
4.1 Nomenclature
4.2 General
4.3 Designation
4.4 Dimensions
4.5 Manufacture
4.6 Marking
5 Chain sprockets
5.1 General
5.2 Nomenclature
5.3 Diametral dimensions of sprocket rim
5.3.1 Nomenclature
5.3.2 Dimensions
5.4 Sprocket tooth gap forms
5.4.1 Nomenclature
5.4.2 Dimensions
5.5 Tooth heights and tip diameters
5.5.1 Nomenclature
5.5.2 Dimensions
5.6 Sprocket rim profiles
5.6.1 Nomenclature
5.6.2 Dimensions
5.7 Radial run-out
5.8 Axial run-out (wobble)
5.9 Pitch accuracy of sprocket teeth
5.10 Number of teeth
5.11 Bore tolerance
5.12 Marking
Annex A (normative) Pitch circle diameters
Annex B (informative) Equivalent chain designations
Annex C (informative) Method of calculating chain minimum dynamic strength
Annex D (informative) Method of determining maximum test force Fmax when conducting dynamic strength conformance test
Annex E (informative) Examples of methods used to avoid an excessive increase in the rate of stress during the tensile test
Annex F (informative) Methods used to approximate the minimum dynamic test values for multiplex chains
Bibliography