ISO 24516-1:2016
Guidelines for the management of assets of water supply and wastewater systems — Part 1: Drinking water distribution networks
ISO 24516-1:2016 specifies guidelines for technical aspects, tools and good practices for the management of assets of drinking water networks to maintain value from existing assets.
ISO 24516-1:2016 does not apply to the management of assets of waterworks (including catchment and treatment, pumping and storage in the network), which are also physically part of the drinking water system and can influence the management of assets of the pipe network.
ISO 24516-1:2016 focuses on the assets typically owned or operated by drinking water utilities (networked drinking water systems) that are expected to meet customer needs and expectations over longer (multi-generational) periods.
ISO 24516-1:2016 includes examples for good practice approaches on the strategic, tactical and operational levels.
ISO 24516-1:2016 is applicable to all types and sizes of organization and/or utilities operating drinking water systems, and all different roles/functions for the management of assets within a utility (e.g. asset owner/responsible body, asset manager/operator, service provider/operator).
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$343.00 NZD
|
|
| HardCopy |
$389.00 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principles aspects of the management of assets
4.1 Objectives and requirements
4.1.1 Objectives
4.1.2 Functional requirements
4.1.3 Performance requirements
4.2 General aspects
4.2.1 General
4.2.2 Principal aspects — Drinking water utilities
4.2.3 Principal aspects — Drinking water systems
4.2.4 Integrating the principal aspects
4.3 Risks and life cycle aspects
4.3.1 Risk
4.3.2 Life cycle
4.4 Structuring the process for management of assets
4.4.1 General
4.4.2 Strategies for the management of assets
4.4.3 Periods of planning
4.4.4 Strategic level activities
4.4.5 Tactical level activities
4.4.6 Operational level activities
5 Investigation
5.1 General
5.2 Purpose of investigation
5.2.1 General
5.3 Determine the scope of the investigation
5.4 Data collection
5.4.1 General
5.4.2 Data requirements
5.4.3 Inventory data
5.4.4 Failure data
5.4.5 Further condition data
5.5 Data registering and data assignment
5.5.1 Data registering
5.5.2 Data assignment
5.5.3 Geo-referencing
5.6 Review of existing information
5.7 Inventory update
5.8 Types of investigation
5.8.1 Hydraulic investigation
5.8.2 Structural investigation
5.8.3 Operational investigation
5.9 Review of performance information
5.10 Planning of investigation
5.11 Performance testing
6 Assessment
6.1 Principles
6.2 Assessment of the hydraulic performance
6.3 Assessment of the structural condition
6.4 Assessment of operational performance
6.5 Compare with performance requirements
6.6 Identification of unacceptable impacts
6.7 Identify causes of performance deficiencies
7 Planning
7.1 General
7.2 Develop integrated solutions
7.3 Assess solutions
7.4 Prepare action plan
8 Implementation
8.1 General
8.2 Create/update plan
8.3 Carry out work
8.4 Monitor performance
8.5 Review performance
9 Operation and maintenance
9.1 General
9.2 Operation
9.3 Maintenance
10 Rehabilitation
10.1 General
10.2 Strategic plan for rehabilitation of physical infrastructure (long-term planning)
10.2.1 General
10.2.2 Service life and failure rate development
10.2.3 Determining the need for rehabilitation of physical infrastructure
10.2.4 Budgeting
10.3 Tactical plan for rehabilitation of physical infrastructure (mid-term planning)
10.3.1 Risk-based evaluation approach
10.3.2 Individual evaluation and prioritizing
10.3.3 Coordination with other construction activities
10.4 Operational plan — Implementation of rehabilitation measures (short-term planning)
11 Documentation and efficiency review
Annex A (informative) Further objectives of the management of assets of drinking water networks
Annex B (informative) Examples for the assessment of service life and failure rates of pipes
Annex C (informative) Examples for risk consideration in management of assets
Bibliography
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 3497:1998
Drinking water treatment units - Plumbing requirements
-
AS/NZS 3497:1998 A1
Drinking water treatment units - Plumbing requirements: Amendment 1
-
AS/NZS 3666.1:2011
Air-handling and water systems of buildings - Microbial control - Part 1: Design, installation and commissioning -
AS/NZS 3666.2:2011
Air-handling and water systems of buildings - Microbial control - Part 2: Operation and maintenance
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principles aspects of the management of assets
4.1 Objectives and requirements
4.1.1 Objectives
4.1.2 Functional requirements
4.1.3 Performance requirements
4.2 General aspects
4.2.1 General
4.2.2 Principal aspects — Drinking water utilities
4.2.3 Principal aspects — Drinking water systems
4.2.4 Integrating the principal aspects
4.3 Risks and life cycle aspects
4.3.1 Risk
4.3.2 Life cycle
4.4 Structuring the process for management of assets
4.4.1 General
4.4.2 Strategies for the management of assets
4.4.3 Periods of planning
4.4.4 Strategic level activities
4.4.5 Tactical level activities
4.4.6 Operational level activities
5 Investigation
5.1 General
5.2 Purpose of investigation
5.2.1 General
5.3 Determine the scope of the investigation
5.4 Data collection
5.4.1 General
5.4.2 Data requirements
5.4.3 Inventory data
5.4.4 Failure data
5.4.5 Further condition data
5.5 Data registering and data assignment
5.5.1 Data registering
5.5.2 Data assignment
5.5.3 Geo-referencing
5.6 Review of existing information
5.7 Inventory update
5.8 Types of investigation
5.8.1 Hydraulic investigation
5.8.2 Structural investigation
5.8.3 Operational investigation
5.9 Review of performance information
5.10 Planning of investigation
5.11 Performance testing
6 Assessment
6.1 Principles
6.2 Assessment of the hydraulic performance
6.3 Assessment of the structural condition
6.4 Assessment of operational performance
6.5 Compare with performance requirements
6.6 Identification of unacceptable impacts
6.7 Identify causes of performance deficiencies
7 Planning
7.1 General
7.2 Develop integrated solutions
7.3 Assess solutions
7.4 Prepare action plan
8 Implementation
8.1 General
8.2 Create/update plan
8.3 Carry out work
8.4 Monitor performance
8.5 Review performance
9 Operation and maintenance
9.1 General
9.2 Operation
9.3 Maintenance
10 Rehabilitation
10.1 General
10.2 Strategic plan for rehabilitation of physical infrastructure (long-term planning)
10.2.1 General
10.2.2 Service life and failure rate development
10.2.3 Determining the need for rehabilitation of physical infrastructure
10.2.4 Budgeting
10.3 Tactical plan for rehabilitation of physical infrastructure (mid-term planning)
10.3.1 Risk-based evaluation approach
10.3.2 Individual evaluation and prioritizing
10.3.3 Coordination with other construction activities
10.4 Operational plan — Implementation of rehabilitation measures (short-term planning)
11 Documentation and efficiency review
Annex A (informative) Further objectives of the management of assets of drinking water networks
Annex B (informative) Examples for the assessment of service life and failure rates of pipes
Annex C (informative) Examples for risk consideration in management of assets
Bibliography