ISO 22882:2004
Castors and wheels — Requirements for castors for hospital beds
ISO 22882:2004 specifies the technical requirements, the appropriate dimensions and the requirements for testing of swivel castors for hospital beds with a wheel diameter of 100 mm or more, and which have a central locking device. Swivel castors may be used with the main principal dimensions.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$126.00 NZD
|
|
| Networkable PDF |
Price varies
|
TitlePage - Castors and wheels— Requirements for castors for hospital beds
TableofContent - Contents Page
Foreword - Foreword
Scope - 1 Scope
NormativeReference - 2 Normative references
Clause1 - 4 Dimensions and characteristics
Subclause2 - 4.1 Characteristics
Subclause2 - 4.2 Dimensions
Subclause2 - 4.3 Fixing system
Subclause2 - 4.4 Load capacity
Clause1 - 5 Requirements for testing
Subclause2 - 5.1 General
Subclause2 - 5.2 Standard conditions
Subclause3 - 5.2.1 Environmental conditions
Subclause3 - 5.2.2 Test sequence
Subclause2 - 5.3 Initial wheel play
Subclause3 - 5.3.1 Test objectives, apparatus and procedures
Subclause3 - 5.3.2 Acceptance criteria
Subclause2 - 5.4 Initial swivel play
Subclause3 - 5.4.1 Test objectives, apparatus and procedures
Subclause3 - 5.4.2 Acceptance criteria
Subclause2 - 5.5 Electrical resistance test
Subclause3 - 5.5.1 Test objectives, apparatus and procedures
Subclause3 - 5.5.2 Test values
Subclause3 - 5.5.3 Tolerances
Subclause3 - 5.5.4 Acceptance criteria
Subclause2 - 5.6 Fatigue test for locking/braking device
Subclause3 - 5.6.1 Test objectives, apparatus and procedures
Subclause3 - 5.6.2 Test values
Subclause3 - 5.6.3 Tolerances
Subclause3 - 5.6.4 Acceptance criteria
Subclause2 - 5.7 Efficiency check of wheel braking and/or locking device
Subclause3 - 5.7.1 Test objectives, apparatus and procedures
Subclause3 - 5.7.2 Test values
Subclause3 - 5.7.3 Tolerances
Subclause3 - 5.7.4 Acceptance criteria
Subclause2 - 5.8 Efficiency check of swivel braking and/or locking device
Subclause3 - 5.8.1 Test objectives, apparatus and procedures
Subclause3 - 5.8.2 Test values
Subclause3 - 5.8.3 Tolerances
Subclause3 - 5.8.4 Acceptance criteria
Subclause2 - 5.9 Static test
Subclause3 - 5.9.1 Test objectives, apparatus and procedures
Subclause3 - 5.9.2 Test values
Subclause3 - 5.9.3 Tolerances
Subclause3 - 5.9.4 Acceptance criteria
Subclause2 - 5.10 Dynamic test
Subclause3 - 5.10.1 Test objectives, apparatus and procedures
Subclause3 - 5.10.2 Test values
Subclause3 - 5.10.3 Tolerances
Subclause3 - 5.10.4 Acceptance criteria
Subclause2 - 5.11 Efficiency check of wheel braking and/or locking device
Subclause2 - 5.12 Efficiency check of swivel braking and/or locking device
Subclause2 - 5.13 Final wheel play
Subclause3 - 5.13.1 Test objectives, apparatus and procedures
Subclause3 - 5.13.2 Acceptance criteria
Subclause2 - 5.14 Final swivel play
Subclause3 - 5.14.1 Test objectives, apparatus and procedures
Subclause3 - 5.14.2 Acceptance criteria
Clause1 - 6 Conformity
Clause1 - 7 Marking of the product
Subclause2 - 7.1 Product marking
Subclause2 - 7.2 Marking of electrically conductive or antistatic castors or wheels
Bibliography - Bibliography
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 4011.1:2014
Single-use medical examination gloves - Part 1: Specification for gloves made from rubber latex or rubber solution -
AS/NZS 4011.2:2014
Single-use medical examination gloves - Part 2: Specification for gloves made from poly(vinyl chloride) -
AS/NZS 4179:2014
Single-use sterile rubber surgical gloves - Specification -
AS/NZS 4261:1994
Reusable containers for the collection of sharp items used in human and animal medical applications
TitlePage - Castors and wheels— Requirements for castors for hospital beds
TableofContent - Contents Page
Foreword - Foreword
Scope - 1 Scope
NormativeReference - 2 Normative references
Clause1 - 4 Dimensions and characteristics
Subclause2 - 4.1 Characteristics
Subclause2 - 4.2 Dimensions
Subclause2 - 4.3 Fixing system
Subclause2 - 4.4 Load capacity
Clause1 - 5 Requirements for testing
Subclause2 - 5.1 General
Subclause2 - 5.2 Standard conditions
Subclause3 - 5.2.1 Environmental conditions
Subclause3 - 5.2.2 Test sequence
Subclause2 - 5.3 Initial wheel play
Subclause3 - 5.3.1 Test objectives, apparatus and procedures
Subclause3 - 5.3.2 Acceptance criteria
Subclause2 - 5.4 Initial swivel play
Subclause3 - 5.4.1 Test objectives, apparatus and procedures
Subclause3 - 5.4.2 Acceptance criteria
Subclause2 - 5.5 Electrical resistance test
Subclause3 - 5.5.1 Test objectives, apparatus and procedures
Subclause3 - 5.5.2 Test values
Subclause3 - 5.5.3 Tolerances
Subclause3 - 5.5.4 Acceptance criteria
Subclause2 - 5.6 Fatigue test for locking/braking device
Subclause3 - 5.6.1 Test objectives, apparatus and procedures
Subclause3 - 5.6.2 Test values
Subclause3 - 5.6.3 Tolerances
Subclause3 - 5.6.4 Acceptance criteria
Subclause2 - 5.7 Efficiency check of wheel braking and/or locking device
Subclause3 - 5.7.1 Test objectives, apparatus and procedures
Subclause3 - 5.7.2 Test values
Subclause3 - 5.7.3 Tolerances
Subclause3 - 5.7.4 Acceptance criteria
Subclause2 - 5.8 Efficiency check of swivel braking and/or locking device
Subclause3 - 5.8.1 Test objectives, apparatus and procedures
Subclause3 - 5.8.2 Test values
Subclause3 - 5.8.3 Tolerances
Subclause3 - 5.8.4 Acceptance criteria
Subclause2 - 5.9 Static test
Subclause3 - 5.9.1 Test objectives, apparatus and procedures
Subclause3 - 5.9.2 Test values
Subclause3 - 5.9.3 Tolerances
Subclause3 - 5.9.4 Acceptance criteria
Subclause2 - 5.10 Dynamic test
Subclause3 - 5.10.1 Test objectives, apparatus and procedures
Subclause3 - 5.10.2 Test values
Subclause3 - 5.10.3 Tolerances
Subclause3 - 5.10.4 Acceptance criteria
Subclause2 - 5.11 Efficiency check of wheel braking and/or locking device
Subclause2 - 5.12 Efficiency check of swivel braking and/or locking device
Subclause2 - 5.13 Final wheel play
Subclause3 - 5.13.1 Test objectives, apparatus and procedures
Subclause3 - 5.13.2 Acceptance criteria
Subclause2 - 5.14 Final swivel play
Subclause3 - 5.14.1 Test objectives, apparatus and procedures
Subclause3 - 5.14.2 Acceptance criteria
Clause1 - 6 Conformity
Clause1 - 7 Marking of the product
Subclause2 - 7.1 Product marking
Subclause2 - 7.2 Marking of electrically conductive or antistatic castors or wheels
Bibliography - Bibliography