ISO 22156:2004
Bamboo — Structural design
ISO 22156:2004 applies to the use of bamboo structures, i.e. structures made of bamboo (round bamboo, split bamboo, glued laminated bamboo) or bamboo-based panels joined together with adhesives or mechanical fasteners.
ISO 22156:2004 is based on limit-state design, and on the performance of the structure. It is only concerned with the requirements for mechanical resistance, serviceability and durability of structures.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$118.26 NZD
|
|
| HardCopy |
$152.17 NZD
|
|
| Networkable PDF |
Price varies
|
TitlePage - Bamboo— Structural design
TableofContent - Contents Page
Foreword - Foreword
Scope - 1 Scope
NormativeReference - 2 Normative references
Clause1 - 4 Symbols and abbreviated terms
Clause1 - 5 Basic requirements
Subclause2 - 5.1 General
Subclause2 - 5.2 Exceptional events
Subclause2 - 5.3 Potential damage
Subclause2 - 5.4 Choice of materials
Subclause2 - 5.5 Exception
Clause1 - 6 Design concepts
Subclause2 - 6.1 Concepts based on calculations
Subclause2 - 6.2 Concepts based otherwise
Subclause3 - 6.2.1 General
Subclause3 - 6.2.2 Experience from previous generations
Subclause3 - 6.2.3 Reports on evaluations
Subclause2 - 6.3 Alternative design
Clause1 - 7 Structural design
Subclause2 - 7.1 Limit states
Subclause2 - 7.2 Material properties
Subclause3 - 7.2.1 Characteristic value
Subclause3 - 7.2.2 Design stresses
Subclause2 - 7.3 Design requirements
Subclause2 - 7.4 Allowable stresses
Subclause2 - 7.5 Sound construction practices
Clause1 - 8 Schematisation
Clause1 - 9 Beams (predominantly loaded in bending)
Clause1 - 10 Columns (predominantly loaded in an axial direction)
Clause1 - 11 Joints
Subclause2 - 11.1 General
Subclause3 - 11.1.1 Based on calculations
Subclause3 - 11.1.2 Based otherwise
Subclause3 - 11.1.3 Complete-joint alternative
Subclause3 - 11.1.4 Component-capacities alternative
Subclause3 - 11.1.5 Design-principles alternative
Subclause2 - 11.2 Tests
Subclause2 - 11.3 Test results
Subclause2 - 11.4 Good design practices
Clause1 - 12 Assemblies (trusses)
Subclause2 - 12.1 General
Subclause2 - 12.2 Global analysis
Subclause2 - 12.3 Simplified analysis
Subclause2 - 12.4 Strength verification of members
Clause1 - 13 Panels
Subclause2 - 13.1 General
Subclause2 - 13.2 Plybamboo
Subclause2 - 13.3 Particleboard and fibreboard
Subclause2 - 13.4 Adhesives
Clause1 - 14 Reinforcement in concrete and soil
Subclause2 - 14.1 In concrete
Subclause2 - 14.2 In soil
Clause1 - 15 Durability and preservation
Clause1 - 16 Fire protection
Clause1 - 17 Grading
Clause1 - 18 Quality control
Subclause2 - 18.1 Introduction
Subclause2 - 18.2 Quality assurance manual
Subclause2 - 18.3 Quality assurance records
Subclause2 - 18.4 Testing programme
AnnexInformative - Background and history
AnnexInformative - Assumptions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 1328.1:1998
Glued laminated structural timber - Performance requirements and minimum production requirements -
AS/NZS 1328.1:1998 A1
Glued laminated structural timber - Performance requirements and minimum production requirements: Amendment 1 -
AS/NZS 1491:1996
Finger jointed structural timber
-
AS/NZS 4364:2010
Timber - Bond performance of structural adhesives
TitlePage - Bamboo— Structural design
TableofContent - Contents Page
Foreword - Foreword
Scope - 1 Scope
NormativeReference - 2 Normative references
Clause1 - 4 Symbols and abbreviated terms
Clause1 - 5 Basic requirements
Subclause2 - 5.1 General
Subclause2 - 5.2 Exceptional events
Subclause2 - 5.3 Potential damage
Subclause2 - 5.4 Choice of materials
Subclause2 - 5.5 Exception
Clause1 - 6 Design concepts
Subclause2 - 6.1 Concepts based on calculations
Subclause2 - 6.2 Concepts based otherwise
Subclause3 - 6.2.1 General
Subclause3 - 6.2.2 Experience from previous generations
Subclause3 - 6.2.3 Reports on evaluations
Subclause2 - 6.3 Alternative design
Clause1 - 7 Structural design
Subclause2 - 7.1 Limit states
Subclause2 - 7.2 Material properties
Subclause3 - 7.2.1 Characteristic value
Subclause3 - 7.2.2 Design stresses
Subclause2 - 7.3 Design requirements
Subclause2 - 7.4 Allowable stresses
Subclause2 - 7.5 Sound construction practices
Clause1 - 8 Schematisation
Clause1 - 9 Beams (predominantly loaded in bending)
Clause1 - 10 Columns (predominantly loaded in an axial direction)
Clause1 - 11 Joints
Subclause2 - 11.1 General
Subclause3 - 11.1.1 Based on calculations
Subclause3 - 11.1.2 Based otherwise
Subclause3 - 11.1.3 Complete-joint alternative
Subclause3 - 11.1.4 Component-capacities alternative
Subclause3 - 11.1.5 Design-principles alternative
Subclause2 - 11.2 Tests
Subclause2 - 11.3 Test results
Subclause2 - 11.4 Good design practices
Clause1 - 12 Assemblies (trusses)
Subclause2 - 12.1 General
Subclause2 - 12.2 Global analysis
Subclause2 - 12.3 Simplified analysis
Subclause2 - 12.4 Strength verification of members
Clause1 - 13 Panels
Subclause2 - 13.1 General
Subclause2 - 13.2 Plybamboo
Subclause2 - 13.3 Particleboard and fibreboard
Subclause2 - 13.4 Adhesives
Clause1 - 14 Reinforcement in concrete and soil
Subclause2 - 14.1 In concrete
Subclause2 - 14.2 In soil
Clause1 - 15 Durability and preservation
Clause1 - 16 Fire protection
Clause1 - 17 Grading
Clause1 - 18 Quality control
Subclause2 - 18.1 Introduction
Subclause2 - 18.2 Quality assurance manual
Subclause2 - 18.3 Quality assurance records
Subclause2 - 18.4 Testing programme
AnnexInformative - Background and history
AnnexInformative - Assumptions