ISO 22153:2020
Electric actuators for industrial valves — General requirements
This document provides basic requirements for electric valve actuators, used for on-off and control valves. It includes guidelines for classification, design, enclosure and corrosion protection, and methods for conformity assessment.
Combinations of electric actuators and gearboxes when supplied by the actuator manufacturer are within the scope of this document.
This document does not cover solenoid actuators, electro-hydraulic actuators and electric actuators which are integral to the valves.
Other requirements or conditions of use different from those indicated in this document are agreed between the purchaser and the manufacturer/supplier, prior to order.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$256.00 NZD
|
|
| HardCopy |
$303.00 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification — Designation
4.1 General
4.2 Type
4.3 Actuator duty classification
4.4 Action on loss of external electric power
4.4.1 Stay put action
4.4.2 Fail-safe action
5 Design requirements
5.1 Endurance
5.1.1 General
5.1.2 Part-turn actuators
5.1.3 Multi-turn actuators
5.1.4 Linear actuators
5.2 Environmental conditions
5.2.1 General
5.2.2 Ambient temperature and humidity
5.2.3 Altitude
5.2.4 Enclosure protection
5.2.5 External corrosion protection
5.2.6 Vibrations, shock and seismic conditions
5.3 Actuator attachment
5.3.1 Part-turn actuators
5.3.2 Multi-turn actuators
5.3.3 Linear actuators
5.4 Primary closing direction
5.5 Fail-safe direction
5.6 Electrical connections — Cable entries
5.7 Self-locking/braking
5.8 Performance
5.8.1 Power supply tolerances
5.8.2 Actuator duty performances
5.8.3 Operating time and speed
5.9 Basic design requirements
5.9.1 Motors
5.9.2 Gearing lubricant
5.9.3 Manual operation
5.9.4 Travel limitation
5.9.5 Torque/thrust limitation
5.9.6 Structural integrity
5.9.7 End stop adjustment for part-turn and linear actuators
5.9.8 Noise
6 Optional equipment
6.1 General
6.2 Anti-condensation heater
6.3 Position transmitter
6.4 Actuator running transmitter
6.5 Additional position and/or torque signalling
6.6 Local control station
6.7 Local position indication
6.8 Actuator electrical controls
6.8.1 General
6.8.2 Positioner
6.8.3 Controller
6.8.4 Speed control
6.8.5 Field bus system interface
6.8.6 Torque transmitter (analogue or digital)
6.8.7 Actuator performance data logger
7 Type and production test
7.1 General
7.2 Type tests
7.3 Control of production process
8 Marking
8.1 General
8.2 Mandatory marking
8.3 Optional marking
9 Documentation
9.1 General
9.2 Mandatory documentation
9.3 Optional documentation
10 Packaging
Annex A (normative) Endurance test procedure
Annex B (informative) Actuator selection guidelines
Annex C (informative) Load profiles
Bibliography
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
BS 6683:1985
Guide to installation and use of valves
-
BS EN 1074-1:2000
Valves for water supply. Fitness for purpose requirements and appropriate verification tests, General requirements
-
BS EN 1074-2:2000
Valves for water supply. Fitness for purpose requirements and appropriate verification tests, Isolating valves
-
BS EN 1074-4:2000
Valves for water supply. Fitness for purpose requirements and appropriate verification tests, Air valves
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification — Designation
4.1 General
4.2 Type
4.3 Actuator duty classification
4.4 Action on loss of external electric power
4.4.1 Stay put action
4.4.2 Fail-safe action
5 Design requirements
5.1 Endurance
5.1.1 General
5.1.2 Part-turn actuators
5.1.3 Multi-turn actuators
5.1.4 Linear actuators
5.2 Environmental conditions
5.2.1 General
5.2.2 Ambient temperature and humidity
5.2.3 Altitude
5.2.4 Enclosure protection
5.2.5 External corrosion protection
5.2.6 Vibrations, shock and seismic conditions
5.3 Actuator attachment
5.3.1 Part-turn actuators
5.3.2 Multi-turn actuators
5.3.3 Linear actuators
5.4 Primary closing direction
5.5 Fail-safe direction
5.6 Electrical connections — Cable entries
5.7 Self-locking/braking
5.8 Performance
5.8.1 Power supply tolerances
5.8.2 Actuator duty performances
5.8.3 Operating time and speed
5.9 Basic design requirements
5.9.1 Motors
5.9.2 Gearing lubricant
5.9.3 Manual operation
5.9.4 Travel limitation
5.9.5 Torque/thrust limitation
5.9.6 Structural integrity
5.9.7 End stop adjustment for part-turn and linear actuators
5.9.8 Noise
6 Optional equipment
6.1 General
6.2 Anti-condensation heater
6.3 Position transmitter
6.4 Actuator running transmitter
6.5 Additional position and/or torque signalling
6.6 Local control station
6.7 Local position indication
6.8 Actuator electrical controls
6.8.1 General
6.8.2 Positioner
6.8.3 Controller
6.8.4 Speed control
6.8.5 Field bus system interface
6.8.6 Torque transmitter (analogue or digital)
6.8.7 Actuator performance data logger
7 Type and production test
7.1 General
7.2 Type tests
7.3 Control of production process
8 Marking
8.1 General
8.2 Mandatory marking
8.3 Optional marking
9 Documentation
9.1 General
9.2 Mandatory documentation
9.3 Optional documentation
10 Packaging
Annex A (normative) Endurance test procedure
Annex B (informative) Actuator selection guidelines
Annex C (informative) Load profiles
Bibliography