ISO 18063-1:2016
Rough-terrain trucks — Visibility test methods and their verification — Part 1: Variable-reach trucks
ISO 18063-1:2016 applies to rough-terrain variable-reach trucks (hereinafter referred to as ?trucks') that have a specific seated operator's position on the left-hand side of the boom or centre position (excluding operator position on the right side of the boom).
ISO 18063-1:2016 specifies a static test method for determining and evaluating the operator's visibility on a rectangular 1 m boundary around the rough-terrain variable-reach truck and on a 12 m radius visibility test circle. Performance requirements for visibility are specified in this document.
ISO 18063-1:2016 does not apply to
- trucks designed to handle freight containers (reach stackers),
- articulated telescopic wheel loaders,
- slewing trucks, or
- lorry mounted trucks.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$213.75 NZD
|
|
| HardCopy |
$267.75 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Test apparatus
4.1 Light source apparatus
4.2 Vertical test object
4.3 Observation mirror
5 Truck test configuration
5.1 Equipment of the truck
5.2 Openings
5.3 Position of the truck and load handling attachment
6 Measurement procedure
6.1 Test-surface marking and truck location on the test surface
6.2 Positioning of the test apparatus
6.3 Measurements of the maskings
6.3.1 General
6.3.2 Measurement at the visibility test circle
6.3.3 Measurement at the rectangular 1 m boundary
6.4 Requirements for derivative trucks
7 Evaluation method and performance criteria
7.1 Visibility performance criteria on the visibility test circle
7.2 Visibility performance criteria for the rectangular 1 m boundary
7.3 Visibility maskings that exceed the visibility performance criteria with direct view
8 Calculation method and computer simulation
9 Test report
9.1 Truck details
9.2 Drawing
10 Information for use
Annex A (informative) Light source spacing dimensions
Annex B (informative) Performance criteria for additional devices
Annex C (informative) Procedure for the determination of maskings at the visibility test circle or the rectangular 1 m boundary
Annex D (informative) Examples of drawings for the test report
Bibliography
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
BS 5639-1:1978
Fork arms for fork lift trucks., Vocabulary for hook-on type fork arms
-
BS AU 50-1.5.1:1994
Tyres and wheels. Tyres. Industrial vehicle tyres, Specification for code-designated series tyres
-
BS AU 50-1.5.3:1994
Tyres and wheels. Tyres. Industrial vehicle tyres, Specification for pneumatic tyres (metric series) on 5° tapered or flat base rims: load ratings
-
BS AU 50-1.5.4a:1994
Tyres and wheels. Tyres. Industrial vehicle tyres, Specification for solid tyres (metric series) for pneumatic tyre rims: designation, dimensions and marking
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Test apparatus
4.1 Light source apparatus
4.2 Vertical test object
4.3 Observation mirror
5 Truck test configuration
5.1 Equipment of the truck
5.2 Openings
5.3 Position of the truck and load handling attachment
6 Measurement procedure
6.1 Test-surface marking and truck location on the test surface
6.2 Positioning of the test apparatus
6.3 Measurements of the maskings
6.3.1 General
6.3.2 Measurement at the visibility test circle
6.3.3 Measurement at the rectangular 1 m boundary
6.4 Requirements for derivative trucks
7 Evaluation method and performance criteria
7.1 Visibility performance criteria on the visibility test circle
7.2 Visibility performance criteria for the rectangular 1 m boundary
7.3 Visibility maskings that exceed the visibility performance criteria with direct view
8 Calculation method and computer simulation
9 Test report
9.1 Truck details
9.2 Drawing
10 Information for use
Annex A (informative) Light source spacing dimensions
Annex B (informative) Performance criteria for additional devices
Annex C (informative) Procedure for the determination of maskings at the visibility test circle or the rectangular 1 m boundary
Annex D (informative) Examples of drawings for the test report
Bibliography