ISO 16283-1:2014
Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation
ISO 16283-1:2014 specifies procedures to determine the airborne sound insulation between two rooms in a building using sound pressure measurements. These procedures are intended for room volumes in the range from 10 m3 to 250 m3 in the frequency range from 50 Hz to 5 000 Hz. The test results can be used to quantify, assess and compare the airborne sound insulation in unfurnished or furnished rooms where the sound field may or may not approximate to a diffuse field. The measured airborne sound insulation is frequency-dependent and can be converted into a single number quantity to characterize the acoustic performance using the rating procedures in ISO 717‑1.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$343.00 NZD
|
|
| HardCopy |
$389.00 NZD
|
|
| Networkable PDF |
Price varies
|
Section sec_1
Section sec_2
Section sec_3
Section sec_3.1
Section sec_3.2
Section sec_3.3
Section sec_3.4
Section sec_3.5
Section sec_3.6
Section sec_3.7
Section sec_3.8
Section sec_3.9
Section sec_3.10
Section sec_3.11
Section sec_3.12
Section sec_3.13
Section sec_3.14
Section sec_3.15
Section sec_4
Section sec_4.1
Section sec_4.2
Section sec_4.3
Section sec_5
Section sec_6
Section sec_7
Section sec_7.1
Section sec_7.2
Section sec_7.2.1
Section sec_7.2.2
Section sec_7.3
Section sec_7.3.1
Section sec_7.3.2
Section sec_7.3.3
Section sec_7.3.4
Section sec_7.4
Section sec_7.4.1
Section sec_7.4.2
Section sec_7.4.3
Section sec_7.4.4
Section sec_7.5
Section sec_7.5.1
Section sec_7.5.2
Section sec_7.5.3
Section sec_7.5.4
Section sec_7.5.5
Table tab_f
Figure fig_1
Section sec_7.5.6
Section sec_7.5.7
Section sec_7.5.8
Section sec_7.6
Section sec_7.7
Section sec_7.7.1
Section sec_7.7.2
Section sec_7.7.3
Section sec_7.8
Section sec_7.8.1
Section sec_7.8.2
Section sec_8
Section sec_8.1
Section sec_8.2
Section sec_8.2.1
Section sec_8.2.2
Section sec_8.3
Table tab_i
Figure fig_2
Section sec_8.4
Section sec_8.5
Section sec_9
Section sec_9.1
Section sec_9.2
Section sec_10
Section sec_10.1
Section sec_10.2
Section sec_10.3
Section sec_10.4
Section sec_10.5
Section sec_10.6
Section sec_11
Section sec_12
Section sec_13
Section sec_14
Annex sec_A
Annex sec_A.1
Annex sec_A.2
Annex sec_B
Figure fig_B.1
Figure fig_B.2
Annex sec_C
Annex sec_C.1
Annex sec_C.2
Annex sec_C.2.1
Annex sec_C.2.2
Annex sec_C.2.3
Annex sec_C.2.4
Table tab_C.1
Annex sec_C.2.5
Annex sec_C.2.6
Annex sec_C.3
Annex sec_C.3.1
Annex sec_C.3.2
Annex sec_C.3.3
Annex sec_C.3.4
Annex sec_C.4
Annex sec_C.4.1
Annex sec_C.4.2
Annex sec_C.4.3
Annex sec_C.4.4
Annex sec_D
Table tab_l
Figure fig_D.1
Annex sec_E
Table tab_m
Figure fig_E.1
Reference ref_1
Reference ref_2
Reference ref_3
Reference ref_4
Reference ref_5
Reference ref_6
Reference ref_7
Reference ref_8
Reference ref_9
Reference ref_10
Reference ref_11
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Instrumentation
4.1 General
4.2 Calibration
4.3 Verification
5 Frequency range
6 General
7 Default procedure for sound pressure level measurement
7.1 General
7.2 Generation of sound field
7.3 Fixed microphone positions
7.4 Mechanized continuously-moving microphone
7.5 Manually-scanned microphone
7.6 Minimum distances for microphone positions
7.7 Averaging times
7.8 Calculation of energy-average sound pressure levels
8 Low-frequency procedure for sound pressure level measurement
8.1 General
8.2 Generation of sound field
8.3 Microphone positions
8.4 Averaging time
8.5 Calculation of low-frequency energy-average sound pressure levels
9 Background noise (default and low-frequency procedure)
9.1 General
9.2 Correction to the signal level for background noise
10 Reverberation time in the receiving room (default and low-frequency procedure)
10.1 General
10.2 Generation of sound field
10.3 Default procedure
10.4 Low-frequency procedure
10.5 Interrupted noise method
10.6 Integrated impulse response method
11 Conversion to octave bands
12 Recording results
13 Uncertainty
14 Test report
Annex A (normative) Requirements for loudspeakers
Annex B (informative) Forms for recording results
Annex C (informative) Additional guidance
Annex D (informative) Horizontal measurements — Examples of suitable loudspeaker and microphone positions
Annex E (informative) Vertical measurements — Examples of suitable loudspeaker and microphone positions
Bibliography
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 2460:2002
Acoustics - Measurement of the reverberation time of rooms
-
AS/NZS 2499:2000
Acoustics - Measurements of sound insulation in buildings and of buildings elements - Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it
-
AS/NZS ISO 717.1:2004
Acoustics - Rating of sound insulation in buildings and of building elements - Airborne sound insulation
-
BS 4142:2014+A1:2019
Methods for rating and assessing industrial and commercial sound
Section sec_1
Section sec_2
Section sec_3
Section sec_3.1
Section sec_3.2
Section sec_3.3
Section sec_3.4
Section sec_3.5
Section sec_3.6
Section sec_3.7
Section sec_3.8
Section sec_3.9
Section sec_3.10
Section sec_3.11
Section sec_3.12
Section sec_3.13
Section sec_3.14
Section sec_3.15
Section sec_4
Section sec_4.1
Section sec_4.2
Section sec_4.3
Section sec_5
Section sec_6
Section sec_7
Section sec_7.1
Section sec_7.2
Section sec_7.2.1
Section sec_7.2.2
Section sec_7.3
Section sec_7.3.1
Section sec_7.3.2
Section sec_7.3.3
Section sec_7.3.4
Section sec_7.4
Section sec_7.4.1
Section sec_7.4.2
Section sec_7.4.3
Section sec_7.4.4
Section sec_7.5
Section sec_7.5.1
Section sec_7.5.2
Section sec_7.5.3
Section sec_7.5.4
Section sec_7.5.5
Table tab_f
Figure fig_1
Section sec_7.5.6
Section sec_7.5.7
Section sec_7.5.8
Section sec_7.6
Section sec_7.7
Section sec_7.7.1
Section sec_7.7.2
Section sec_7.7.3
Section sec_7.8
Section sec_7.8.1
Section sec_7.8.2
Section sec_8
Section sec_8.1
Section sec_8.2
Section sec_8.2.1
Section sec_8.2.2
Section sec_8.3
Table tab_i
Figure fig_2
Section sec_8.4
Section sec_8.5
Section sec_9
Section sec_9.1
Section sec_9.2
Section sec_10
Section sec_10.1
Section sec_10.2
Section sec_10.3
Section sec_10.4
Section sec_10.5
Section sec_10.6
Section sec_11
Section sec_12
Section sec_13
Section sec_14
Annex sec_A
Annex sec_A.1
Annex sec_A.2
Annex sec_B
Figure fig_B.1
Figure fig_B.2
Annex sec_C
Annex sec_C.1
Annex sec_C.2
Annex sec_C.2.1
Annex sec_C.2.2
Annex sec_C.2.3
Annex sec_C.2.4
Table tab_C.1
Annex sec_C.2.5
Annex sec_C.2.6
Annex sec_C.3
Annex sec_C.3.1
Annex sec_C.3.2
Annex sec_C.3.3
Annex sec_C.3.4
Annex sec_C.4
Annex sec_C.4.1
Annex sec_C.4.2
Annex sec_C.4.3
Annex sec_C.4.4
Annex sec_D
Table tab_l
Figure fig_D.1
Annex sec_E
Table tab_m
Figure fig_E.1
Reference ref_1
Reference ref_2
Reference ref_3
Reference ref_4
Reference ref_5
Reference ref_6
Reference ref_7
Reference ref_8
Reference ref_9
Reference ref_10
Reference ref_11
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Instrumentation
4.1 General
4.2 Calibration
4.3 Verification
5 Frequency range
6 General
7 Default procedure for sound pressure level measurement
7.1 General
7.2 Generation of sound field
7.3 Fixed microphone positions
7.4 Mechanized continuously-moving microphone
7.5 Manually-scanned microphone
7.6 Minimum distances for microphone positions
7.7 Averaging times
7.8 Calculation of energy-average sound pressure levels
8 Low-frequency procedure for sound pressure level measurement
8.1 General
8.2 Generation of sound field
8.3 Microphone positions
8.4 Averaging time
8.5 Calculation of low-frequency energy-average sound pressure levels
9 Background noise (default and low-frequency procedure)
9.1 General
9.2 Correction to the signal level for background noise
10 Reverberation time in the receiving room (default and low-frequency procedure)
10.1 General
10.2 Generation of sound field
10.3 Default procedure
10.4 Low-frequency procedure
10.5 Interrupted noise method
10.6 Integrated impulse response method
11 Conversion to octave bands
12 Recording results
13 Uncertainty
14 Test report
Annex A (normative) Requirements for loudspeakers
Annex B (informative) Forms for recording results
Annex C (informative) Additional guidance
Annex D (informative) Horizontal measurements — Examples of suitable loudspeaker and microphone positions
Annex E (informative) Vertical measurements — Examples of suitable loudspeaker and microphone positions
Bibliography