ISO 14743:2020
Pneumatic fluid power — Push-in connectors for thermoplastic tubes
This document specifies the general requirements and test methods for the design and performance of push-in connectors for use with thermoplastic tubes with outside diameters (OD) from 3 mm to 16 mm including dimensions in inches.
This document is intended to establish uniform methods of testing complete push-in connector assemblies as used in pneumatic fluid power applications. It is not applicable to air braking systems.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$338.63 NZD
|
|
| HardCopy |
$389.25 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Working conditions
5 Features
6 OD of tube
7 Design
8 Marking
9 Performance requirements and testing
9.1 General
9.2 Test samples
9.3 Tensile test
9.3.1 Procedure
9.3.2 Pass/fail criteria
9.4 Pressure at maximum temperature test (for PA tubing only)
9.4.1 Description
9.4.2 Apparatus
9.4.3 Procedure
9.4.4 Pass/fail criteria
9.5 Proof and burst pressure test (for PA tubing only)
9.5.1 Description
9.5.2 Apparatus
9.5.3 Procedure
9.5.4 Pass/fail criteria
9.6 Connecting force test
9.6.1 Apparatus
9.6.2 Procedure
9.6.3 Pass/fail criteria
9.7 Disconnecting force test
9.7.1 Apparatus
9.7.2 Procedure
9.7.3 Pass/fail criteria
9.8 Leakage test (to be performed before disconnecting)
9.8.1 Description
9.8.2 Apparatus
9.8.3 Procedure
9.8.4 Pass/fail criteria
9.9 Cyclic endurance (impulse) test with vibration (for PA tubing only)
9.9.1 Description
9.9.2 Apparatus
9.9.3 Procedure
9.9.4 Pass/fail criteria
10 Designation
11 Identification statement (reference to this document)
Annex A (normative) PA tubes for testing
Annex B (normative) PU tubes for testing
Bibliography
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 2280:2020
Ductile iron pipes and fittings -
AS/NZS 2280:2020 A1
Ductile iron pipes & fittings
-
BS 5200:1997
Specification for dimensions of hydraulic connectors and adaptors
-
BS 5242-2:1983
Tubes for fluid power cylinder barrels, Specification for non-ferrous metallic tubes with specially finished bores
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Working conditions
5 Features
6 OD of tube
7 Design
8 Marking
9 Performance requirements and testing
9.1 General
9.2 Test samples
9.3 Tensile test
9.3.1 Procedure
9.3.2 Pass/fail criteria
9.4 Pressure at maximum temperature test (for PA tubing only)
9.4.1 Description
9.4.2 Apparatus
9.4.3 Procedure
9.4.4 Pass/fail criteria
9.5 Proof and burst pressure test (for PA tubing only)
9.5.1 Description
9.5.2 Apparatus
9.5.3 Procedure
9.5.4 Pass/fail criteria
9.6 Connecting force test
9.6.1 Apparatus
9.6.2 Procedure
9.6.3 Pass/fail criteria
9.7 Disconnecting force test
9.7.1 Apparatus
9.7.2 Procedure
9.7.3 Pass/fail criteria
9.8 Leakage test (to be performed before disconnecting)
9.8.1 Description
9.8.2 Apparatus
9.8.3 Procedure
9.8.4 Pass/fail criteria
9.9 Cyclic endurance (impulse) test with vibration (for PA tubing only)
9.9.1 Description
9.9.2 Apparatus
9.9.3 Procedure
9.9.4 Pass/fail criteria
10 Designation
11 Identification statement (reference to this document)
Annex A (normative) PA tubes for testing
Annex B (normative) PU tubes for testing
Bibliography