ISO 13194:2011
Box pallets — Principal requirements and test methods
ISO 13194:2011 specifies the definitions, principal requirements and test methods for box pallets of all materials. It applies to box pallets, including post pallets and cage pallets, but is not intended to apply to tank and silo pallets as defined in ISO 445. It also applies to box pallets which can be stacked and handled by forklift trucks or pallet trucks, but excludes other lifting devices.
ISO 13194:2011 addresses the performance of the box pallet only, and not its contents.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$256.00 NZD
|
|
| HardCopy |
$303.00 NZD
|
|
| Networkable PDF |
Price varies
|
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Requirements
5.1 Materials
5.2 Dimensions, stacking load and test load
5.2.1 Stacking devices
5.2.2 Dimensions
5.2.3 Nominal load — Nominal stacking load
5.2.4 Test load
5.3 Conditioning and duration of test
5.3.1 Conditioning
5.3.2 Duration of tests
5.3.3 Number of replicates
6 Test methods
6.1 Test No. 1 — Bending test
6.1.1 Test purpose
6.1.2 Test procedure
6.1.3 Performance requirements
6.2 Test No. 2 — Stacking test
6.2.1 Test purpose
6.2.2 Calculations
6.2.2.1 Standard calculation — Equation (1)
6.2.2.2 Collapsible box pallets — Equation (2)
6.2.3 Test procedure
6.2.4 Performance requirements
6.3 Test No. 3 — Vertical impact test by dropping
6.3.1 Test purpose
6.3.2 Test procedure
6.3.2.1 Impact on a base
6.3.2.2 Impact on an edge and a corner
6.3.3 Performance requirements
6.4 Test No. 4 — Horizontal impact test
6.4.1 Test purpose
6.4.2 Test procedure
6.4.3 Performance requirements
6.5 Test No. 5 — Stacking deformation test
6.5.1 Test purpose
6.5.2 Test procedure
6.5.3 Performance requirements
6.6 Test No. 6 — Static coefficient of friction test
6.6.1 Test purpose
6.6.2 Test procedure
6.6.3 Performance requirements
6.7 Test No. 7 — Vibration test
6.7.1 Test purpose
6.7.2 Test procedure
6.7.3 Performance requirements
7 Marking
8 Test report
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
BS 6407-1:1983
Cage pallets for retail use, Specification for collapsible cage pallets rated at 300 kg
-
BS 6407-2:1984
Cage pallets for retail use, Guide to the safe handling and use of collapsible cage pallets rated at 300 kg
-
BS EN 12246:1999
Quality classification of timber used in pallets and packaging
-
BS EN 12249:1999
Sawn timber used in pallets. Permitted deviations and guidelines for dimensions
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Requirements
5.1 Materials
5.2 Dimensions, stacking load and test load
5.2.1 Stacking devices
5.2.2 Dimensions
5.2.3 Nominal load — Nominal stacking load
5.2.4 Test load
5.3 Conditioning and duration of test
5.3.1 Conditioning
5.3.2 Duration of tests
5.3.3 Number of replicates
6 Test methods
6.1 Test No. 1 — Bending test
6.1.1 Test purpose
6.1.2 Test procedure
6.1.3 Performance requirements
6.2 Test No. 2 — Stacking test
6.2.1 Test purpose
6.2.2 Calculations
6.2.2.1 Standard calculation — Equation (1)
6.2.2.2 Collapsible box pallets — Equation (2)
6.2.3 Test procedure
6.2.4 Performance requirements
6.3 Test No. 3 — Vertical impact test by dropping
6.3.1 Test purpose
6.3.2 Test procedure
6.3.2.1 Impact on a base
6.3.2.2 Impact on an edge and a corner
6.3.3 Performance requirements
6.4 Test No. 4 — Horizontal impact test
6.4.1 Test purpose
6.4.2 Test procedure
6.4.3 Performance requirements
6.5 Test No. 5 — Stacking deformation test
6.5.1 Test purpose
6.5.2 Test procedure
6.5.3 Performance requirements
6.6 Test No. 6 — Static coefficient of friction test
6.6.1 Test purpose
6.6.2 Test procedure
6.6.3 Performance requirements
6.7 Test No. 7 — Vibration test
6.7.1 Test purpose
6.7.2 Test procedure
6.7.3 Performance requirements
7 Marking
8 Test report