ISO 11243:2016
Cycles — Luggage carriers for bicycles — Requirements and test methods
ISO 11243:2016 specifies safety and performance requirements for the design and testing of luggage carriers intended for mounting (with or without tool) above and adjacent to the wheels of cycles and lays down guide lines for instructions on the use and care of such luggage carriers.
It does not apply to removable luggage (for example, handlebar bags or baskets that are not permanently attached).
Toy carrier intended to be mounted on bicycles for young children in the scope of ISO 8098 are not covered by ISO 11243:2016.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$118.26 NZD
|
|
| HardCopy |
$152.17 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Requirements and test methods
5.1 General
5.2 Tolerances
5.3 Sharp edges
5.4 Security of safety-related fasteners
5.4.1 Security of screws
5.4.2 Minimum breaking torque
5.4.3 Fixation elements
5.5 Crack detection methods
5.6 Dimensions
5.7 Protrusions
5.8 Assembly
5.9 Rear luggage carriers — Provision for lighting
5.10 Strength under high and low temperature
5.10.1 General
5.10.2 Requirement
5.10.3 High temperature test — Test method
5.10.4 Low temperature test — Test method
5.11 Dynamic load tests
5.11.1 Requirement
5.11.2 General test method
5.11.3 Vertical test method
5.11.4 Lateral test method
5.12 Static load test — Vertical load
5.12.1 Requirements
5.12.2 Test method
5.13 Static load test — Lateral load
5.13.1 Requirement
5.13.2 Test method
6 Marking
6.1 Requirements
6.2 Durability test
6.2.1 Requirements
6.2.2 Test method
7 Instructions
8 Test report
Annex A (informative) Typical test configuration
Annex B (informative) Longitudinal dynamic load test
Annex C (informative) Examples of carrier configurations
Bibliography
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 1927:2010
Pedal bicycles - Safety requirements
-
AS/NZS 1927:2010 A1
Pedal bicycles - Safety requirements: Amendment 1:2014 -
AS/NZS 4287:1995
Child carrier seats for pedal bicycles - Safety requirements
-
AS/NZS 6742.1:2024
Cycles – Lighting and retro-reflective devices, Part 1: Lighting and light signalling devices (ISO 6742-1:2023, MOD)
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Requirements and test methods
5.1 General
5.2 Tolerances
5.3 Sharp edges
5.4 Security of safety-related fasteners
5.4.1 Security of screws
5.4.2 Minimum breaking torque
5.4.3 Fixation elements
5.5 Crack detection methods
5.6 Dimensions
5.7 Protrusions
5.8 Assembly
5.9 Rear luggage carriers — Provision for lighting
5.10 Strength under high and low temperature
5.10.1 General
5.10.2 Requirement
5.10.3 High temperature test — Test method
5.10.4 Low temperature test — Test method
5.11 Dynamic load tests
5.11.1 Requirement
5.11.2 General test method
5.11.3 Vertical test method
5.11.4 Lateral test method
5.12 Static load test — Vertical load
5.12.1 Requirements
5.12.2 Test method
5.13 Static load test — Lateral load
5.13.1 Requirement
5.13.2 Test method
6 Marking
6.1 Requirements
6.2 Durability test
6.2.1 Requirements
6.2.2 Test method
7 Instructions
8 Test report
Annex A (informative) Typical test configuration
Annex B (informative) Longitudinal dynamic load test
Annex C (informative) Examples of carrier configurations
Bibliography