ISO 11148-1:2011
Hand-held non-electric power tools — Safety requirements — Part 1: Assembly power tools for non-threaded mechanical fasteners
ISO 11148-1:2011 specifies safety requirements for hand-held non-electric power tools (hereinafter "assembly power tools for non-threaded mechanical fasteners") intended for installation, tightening or removal of both breakstem and non-breakstem rivets, bolts, plugs and fasteners from one side of a workpiece into metals, plastics and other materials. The assembly power tools for non-threaded mechanical fasteners can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.
ISO 11148-1:2011 is applicable to breakstem fastener, rivet or plug tools, breakstem lockbolt tools, mandrel loaded riveting tools and rivet nut setters.
ISO 11148-1:2011 is not applicable to special requirements and modifications of hand-held power tools for the purpose of mounting them in a fixture.
ISO 11148-1:2011 deals with all significant hazards, hazardous situations or hazardous events relevant to assembly power tools for non-threaded mechanical fasteners when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of power tools in potentially explosive atmospheres.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$256.00 NZD
|
|
| HardCopy |
$303.00 NZD
|
|
| Networkable PDF |
Price varies
|
1 Scope
2 Normative references
3 Terms and definitions
3.1 General terms and definitions
3.2 Terms and definitions related to assembly power tools for non-threaded mechanical fasteners
4 Safety requirements and/or protective measures
4.1 General
4.2 Mechanical safety
4.2.1 Surfaces, edges and corners
4.2.2 Supporting surface and stability
4.2.3 Collection of ejected stems
4.2.4 Hydraulic fluid ejection
4.2.5 Power tool construction
4.3 Thermal safety
4.4 Noise reduction
4.5 Vibration
4.6 Materials and substances processed, used or exhausted
4.6.1 Exhaust air or gas
4.6.2 Lubricants
4.7 Ergonomics
4.7.1 Design of the handle
4.7.2 Suspension device
4.8 Controls
4.8.1 Start-and-stop device
4.8.2 Unintentional start
4.8.3 Actuating forces
5 Verification
5.1 General conditions for the tests
5.2 Noise
5.3 Vibration
5.4 Unintentional start
5.5 Power tool construction
5.6 Structure of verification
6 Information for use
6.1 Marking, signs and written warnings
6.2 Instruction handbook
6.2.1 General
6.2.2 Operator's instructions
6.2.2.1 General
6.2.2.2 Statement of use
6.2.2.3 Allowance for user
6.2.2.4 General safety rules
6.2.2.5 Projectile hazards
6.2.2.6 Operating hazards
6.2.2.7 Repetitive motions hazards
6.2.2.8 Accessory hazards
6.2.2.9 Workplace hazards
6.2.2.10 Noise hazards
6.2.2.11 Vibration hazards
6.2.3 Additional safety instructions for pneumatic power tools
6.2.4 Additional safety instructions for hydraulic power tools
6.2.5 Specific safety instructions
6.3 Operating instructions
6.4 Data
6.4.1 General
6.4.2 Noise
6.4.2.1 Declaration of emission
6.4.2.2 Additional information
6.4.3 Vibration
6.4.3.1 Declaration of emission
6.4.3.2 Additional information
6.5 Maintenance instructions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
BS 5344:1985
Methods for performance tests for rotary and percussive pneumatic tools
-
BS 6268:1982
Method of measurement for reaction torque and torque impulse from hand-held pneumatic assembly tools for installing threaded fasteners
-
BS 673:1984
Specification for shanks for pneumatic tools and fitting dimensions of chuck bushings
-
BS EN ISO 11148-1:2011
Hand-held non-electric power tools. Safety requirements, Assembly power tools for non-threaded mechanical fasteners
1 Scope
2 Normative references
3 Terms and definitions
3.1 General terms and definitions
3.2 Terms and definitions related to assembly power tools for non-threaded mechanical fasteners
4 Safety requirements and/or protective measures
4.1 General
4.2 Mechanical safety
4.2.1 Surfaces, edges and corners
4.2.2 Supporting surface and stability
4.2.3 Collection of ejected stems
4.2.4 Hydraulic fluid ejection
4.2.5 Power tool construction
4.3 Thermal safety
4.4 Noise reduction
4.5 Vibration
4.6 Materials and substances processed, used or exhausted
4.6.1 Exhaust air or gas
4.6.2 Lubricants
4.7 Ergonomics
4.7.1 Design of the handle
4.7.2 Suspension device
4.8 Controls
4.8.1 Start-and-stop device
4.8.2 Unintentional start
4.8.3 Actuating forces
5 Verification
5.1 General conditions for the tests
5.2 Noise
5.3 Vibration
5.4 Unintentional start
5.5 Power tool construction
5.6 Structure of verification
6 Information for use
6.1 Marking, signs and written warnings
6.2 Instruction handbook
6.2.1 General
6.2.2 Operator's instructions
6.2.2.1 General
6.2.2.2 Statement of use
6.2.2.3 Allowance for user
6.2.2.4 General safety rules
6.2.2.5 Projectile hazards
6.2.2.6 Operating hazards
6.2.2.7 Repetitive motions hazards
6.2.2.8 Accessory hazards
6.2.2.9 Workplace hazards
6.2.2.10 Noise hazards
6.2.2.11 Vibration hazards
6.2.3 Additional safety instructions for pneumatic power tools
6.2.4 Additional safety instructions for hydraulic power tools
6.2.5 Specific safety instructions
6.3 Operating instructions
6.4 Data
6.4.1 General
6.4.2 Noise
6.4.2.1 Declaration of emission
6.4.2.2 Additional information
6.4.3 Vibration
6.4.3.1 Declaration of emission
6.4.3.2 Additional information
6.5 Maintenance instructions