ISO 10360-13:2021
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 13: Optical 3D CMS
This document specifies the acceptance tests for verifying the performance of an optical 3D coordinate measuring system (CMS) when measuring lengths as stated by the manufacturer. It also specifies the reverification tests that enable the user to periodically reverify the performance of the optical 3D CMS.
This document is applicable to verification of the measuring performance of CMSs if the surface characteristics (e.g. glossiness, colour) of the object to be scanned are restricted and within a cooperative range.
This document does not apply to other types of CMSs, including those covered by the other parts of the ISO 10360 series.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$434.25 NZD
|
|
| HardCopy |
$483.75 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Rated operating conditions
5.1 Environmental conditions
5.2 Operating conditions
5.2.1 General
5.2.2 Material and surface characteristic of material standards
5.2.3 Pre-processing
6 Acceptance and reverification test
6.1 General
6.2 Distortion characteristics
6.2.1 General
6.2.2 Distortion error
6.3 Probing characteristics
6.3.1 Principle
6.3.2 Material standard
6.3.3 Procedure
6.3.4 Derivation of test results
6.3.5 Flat-form distortion error
6.4 Volumetric length measurement error in concatenated measurement volume
6.4.1 Principle
6.4.2 Material standard
6.4.3 Low CTE case
6.4.4 Procedure
6.4.5 Derivation of test results
7 Conformity with the specification
7.1 Acceptance test
7.1.1 Acceptance criteria
7.2 Reverification test
8 Applications
8.1 Acceptance test
8.2 Reverification test
8.3 Interim check
9 Indication in product documentation and data sheets
Annex A (informative) Evaluation of bi-directional length measurement characteristics
Annex B (normative) Artefacts that represent a calibrated test length and corresponding measurement procedures
Annex C (informative) Procedure of concatenated length measurement to assess the influence of the concatenation path on error propagation
Annex D (informative) Alignment of artefacts
Annex E (informative) Surface characteristic of material standard
Annex F (informative) Structural resolution test
Annex G (informative) Guidelines for the evaluation of the test value uncertainty
Annex H (informative) Relation to the GPS matrix model
Bibliography
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
BS 1044-1:2008
Specification for gauge blanks, Plug, ring and calliper gauges
-
BS 1054:1975
Specification for engineers' comparators for external measurement
-
BS 1347:1986
Specification for architects', engineers' and surveyors' metric scale rules
-
BS 1643:2008
Specification for precision vernier height gauges
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Rated operating conditions
5.1 Environmental conditions
5.2 Operating conditions
5.2.1 General
5.2.2 Material and surface characteristic of material standards
5.2.3 Pre-processing
6 Acceptance and reverification test
6.1 General
6.2 Distortion characteristics
6.2.1 General
6.2.2 Distortion error
6.3 Probing characteristics
6.3.1 Principle
6.3.2 Material standard
6.3.3 Procedure
6.3.4 Derivation of test results
6.3.5 Flat-form distortion error
6.4 Volumetric length measurement error in concatenated measurement volume
6.4.1 Principle
6.4.2 Material standard
6.4.3 Low CTE case
6.4.4 Procedure
6.4.5 Derivation of test results
7 Conformity with the specification
7.1 Acceptance test
7.1.1 Acceptance criteria
7.2 Reverification test
8 Applications
8.1 Acceptance test
8.2 Reverification test
8.3 Interim check
9 Indication in product documentation and data sheets
Annex A (informative) Evaluation of bi-directional length measurement characteristics
Annex B (normative) Artefacts that represent a calibrated test length and corresponding measurement procedures
Annex C (informative) Procedure of concatenated length measurement to assess the influence of the concatenation path on error propagation
Annex D (informative) Alignment of artefacts
Annex E (informative) Surface characteristic of material standard
Annex F (informative) Structural resolution test
Annex G (informative) Guidelines for the evaluation of the test value uncertainty
Annex H (informative) Relation to the GPS matrix model
Bibliography