AS/NZS 3580.9.13:2013
Methods for sampling and analysis of ambient air - Method 9.13: Determination of suspended particulate matter - PM2.5 continuous direct mass method using a tapered element oscillating microbalance monitor
Provides regulatory and testing bodies with a standard method for continuously monitoring suspended particulate matter changes of particles less than 2.5 micrometres in diameter (PM2.5) in ambient air, providing near real time measurement of mean particle concentration.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$123.30 NZD
|
|
| HardCopy |
$137.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 3580.9.13:2013 METHODS FOR SAMPLING AND ANALYSIS OF AMBIENT AIR - DETERMINATION OF SUSPENDED PARTICULATE MATTER-...
PREFACE
1 SCOPE
2 REFERENCED DOCUMENTS
3 DEFINITIONS
3.1 Equivalent aerodynamic diameter (EAD)
3.2 PM10
3.3 PM2.5
3.4 U95
4 PRINCIPLE
5 APPARATUS
5.1 Monitor
5.2 Analytical balance
5.3 Sample filter cartridges
5.4 FDMS cooler purge filters
5.5 PM10 size-selective inlet
5.6 PM2.5 particle size separator
5.7 Reference flow meter
5.8 Reference thermometer
5.9 Reference barometer
6 SAMPLING
6.1 Location
6.2 Installation
6.3 Sampling environment
7 PROCEDURE
7.1 Instrument calibration
7.1.1 General
7.1.2 Mass transducer calibration constant (K0) verification
7.1.3 Flow verification
7.1.4 Flow controller calibration
7.1.5 Ambient temperature sensor verification/calibration
7.1.6 Pressure sensor verification/calibration
7.1.7 Noise check
7.1.8 Analog calibration
7.2 Instrument maintenance
7.2.1 General
7.2.2 Filter replacement
7.2.3 Instrument clock verification
7.2.4 Leak check
7.2.5 Flow system component cleaning
7.2.6 FDMS cooler cleaning
7.2.7 Switching valve maintenance
7.2.8 FDMS dryer replacement
7.2.9 Pump reconditioning
7.3 Instrument operation
8 CALCULATION AND EXPRESSION OF RESULTS
9 MEASUREMENT UNCERTAINTY
10 QUALITY CONTROL AND ASSURANCE
10.1 Instrument and station log
10.2 Data acquisition and transfer
10.3 Data validation
10.3.1 General
10.3.2 Handling negative mass data artifacts
11 TEST REPORT
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
AS/NZS 3580.1.1:2016
Methods for sampling and analysis of ambient air - Guide to siting air monitoring equipment -
AS/NZS 3580.10.1:2016
Methods for sampling and analysis of ambient air - Method 10.1: Determination of particulate matter - Deposited matter - Gravimetric method -
AS/NZS 3580.10.2:2013
Methods for sampling and analysis of ambient air - Method 10.2: Determination of particulate matter - Impinged matter - Gravimetric method -
AS/NZS 3580.11.1:2013
Methods for sampling and analysis of ambient air - Method 11.1: Determination of methane and non-methane organic compounds in ambient air - Direct-reading instrumental method
AS/NZS 3580.9.13:2013 METHODS FOR SAMPLING AND ANALYSIS OF AMBIENT AIR - DETERMINATION OF SUSPENDED PARTICULATE MATTER-...
PREFACE
1 SCOPE
2 REFERENCED DOCUMENTS
3 DEFINITIONS
3.1 Equivalent aerodynamic diameter (EAD)
3.2 PM10
3.3 PM2.5
3.4 U95
4 PRINCIPLE
5 APPARATUS
5.1 Monitor
5.2 Analytical balance
5.3 Sample filter cartridges
5.4 FDMS cooler purge filters
5.5 PM10 size-selective inlet
5.6 PM2.5 particle size separator
5.7 Reference flow meter
5.8 Reference thermometer
5.9 Reference barometer
6 SAMPLING
6.1 Location
6.2 Installation
6.3 Sampling environment
7 PROCEDURE
7.1 Instrument calibration
7.1.1 General
7.1.2 Mass transducer calibration constant (K0) verification
7.1.3 Flow verification
7.1.4 Flow controller calibration
7.1.5 Ambient temperature sensor verification/calibration
7.1.6 Pressure sensor verification/calibration
7.1.7 Noise check
7.1.8 Analog calibration
7.2 Instrument maintenance
7.2.1 General
7.2.2 Filter replacement
7.2.3 Instrument clock verification
7.2.4 Leak check
7.2.5 Flow system component cleaning
7.2.6 FDMS cooler cleaning
7.2.7 Switching valve maintenance
7.2.8 FDMS dryer replacement
7.2.9 Pump reconditioning
7.3 Instrument operation
8 CALCULATION AND EXPRESSION OF RESULTS
9 MEASUREMENT UNCERTAINTY
10 QUALITY CONTROL AND ASSURANCE
10.1 Instrument and station log
10.2 Data acquisition and transfer
10.3 Data validation
10.3.1 General
10.3.2 Handling negative mass data artifacts
11 TEST REPORT
AS/NZS 3580.9.13:2013
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.