ISO/TR 14799-2:2015
Comparison of worldwide escalator and moving walk safety standards — Part 2: Abbreviated comparison and comments
ISO/TR 14799-2:2015 consists of a comparison of the requirements of selected topics as covered by the following worldwide safety standards (excluding local deviations):
a) Europe (CEN) ? EN 115‑1, Safety of escalators and moving walks ? Part 1: Construction and installation (Edition 2010, including Amendment 1);
b) North America - ASME A17.1/CSA B44-2010, Safety Code for Elevators and Escalators;
c) Japan ? Safety requirements mainly comprised of Building Standard Law Enforcement Order (BSLJ-EO), Notifications of Ministry of Construction (MOC-N), and Japan Elevator Association Standard (JEAS).
It is to be noted that in addition to the above listed standards and other regulations, escalators and moving walks may be required to conform to the requirements of other standards, as appropriate. Where ISO/TC 178 was aware of these standards, they are mentioned in Annex B.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$141.75 NZD
|
|
| HardCopy |
$194.63 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Acronyms, abbreviated designations, and terminology
2.1 Acronyms and abbreviated designations
2.2 Terminology (list of terms used in the codes)
3 Basis for escalator and moving walk safety standards
3.1 Historical origin and development of standards
3.1.1 European Standard EN 115‑1
3.1.2 North American Standard A17.1/B44
3.1.3 The Japanese codes
3.2 General — Technical basis and structure of standards
3.3 Definitions
4 Selected topics
4.1 General
4.2 Enclosure, inspection doors
4.3 Steps and pallets
4.4 Belts
4.5 Drive unit
4.6 Balustrade
4.7 Handrail system
4.8 Landings
4.9 Machinery spaces, driving stations, and return stations
4.10 Electric installation and appliances
4.11 Protection against electrical faults — Controls
4.12 Information for use
4.13 Building interfaces
Annex A (informative) Figures of EN115-1
Annex B (informative) References in the compared codes
Annex C (informative) Addresses of standardization bodies occupied with the compared codes
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 1735.18:2002
Lifts, escalators and moving walks (SAA Lift Code) - Passenger lifts for private residence - Automatically controlled
-
AS/NZS 4431:1996
Guidelines for safe working on new lift installations in new constructions
-
BS 2655-1:1970
Specification for lifts, escalators, passenger conveyors and paternosters, General requirements for electric, hydraulic and hand-powered lifts
-
BS 2655-10:1972
Specification for lifts, escalators, passenger conveyors and paternosters, General requirements for guarding
Foreword
Introduction
1 Scope
2 Acronyms, abbreviated designations, and terminology
2.1 Acronyms and abbreviated designations
2.2 Terminology (list of terms used in the codes)
3 Basis for escalator and moving walk safety standards
3.1 Historical origin and development of standards
3.1.1 European Standard EN 115‑1
3.1.2 North American Standard A17.1/B44
3.1.3 The Japanese codes
3.2 General — Technical basis and structure of standards
3.3 Definitions
4 Selected topics
4.1 General
4.2 Enclosure, inspection doors
4.3 Steps and pallets
4.4 Belts
4.5 Drive unit
4.6 Balustrade
4.7 Handrail system
4.8 Landings
4.9 Machinery spaces, driving stations, and return stations
4.10 Electric installation and appliances
4.11 Protection against electrical faults — Controls
4.12 Information for use
4.13 Building interfaces
Annex A (informative) Figures of EN115-1
Annex B (informative) References in the compared codes
Annex C (informative) Addresses of standardization bodies occupied with the compared codes