ISO 17546:2016
Space systems — Lithium ion battery for space vehicles — Design and verification requirements
ISO 17546:2016 specifies design and minimum verification requirements for lithium ion rechargeable (including lithium ion polymer) batteries for space vehicles.
Lithium ion secondary electrochemical systems use intercalation compounds (intercalated lithium exists in an ionic or quasi-atomic form within the lattice of the electrode material) in the positive and in the negative electrodes.
The focus of this International Standard is on "battery assembly" and cell is described as "component cells" to be harmonized with other industrial standards and regulations.
"Performance"," safety", and "logistics" are the main points of view to specify.
ISO 17546:2016 does not address "disposal" or "recycle"; however, some recommendations regarding disposal are suggested.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$141.75 NZD
|
|
| HardCopy |
$194.63 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
1.1 Life cycle
1.2 Performance
1.3 Safety
1.4 Logistics
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Cell
5.1 Performance
5.1.1 Purpose
5.1.2 Terminology
5.1.3 Requirement for quality assurance
5.1.4 Cell qualification test
5.1.5 Models for analysis
5.2 Safety
5.2.1 Purpose
5.2.2 Definitions and control of dangerous phenomenon
5.2.3 Safety testing
5.3 Logistics
5.3.1 Purpose
5.3.2 Cell manufacturing, storage and testing
5.3.3 Safety measure for handling
5.3.4 Cell transportation
6 Battery
6.1 Performance
6.1.1 Purpose
6.1.2 Terminology
6.1.3 Basic performance
6.1.4 Life test demonstration
6.1.5 Design requirements
6.1.6 Requirement of quality management
6.2 Safety
6.2.1 Purpose
6.2.2 Definitions of dangerous phenomenon
6.2.3 Technical requirement
6.2.4 Safety testing
6.3 Logistics
6.3.1 Purpose
6.3.2 Manufacture/assembly storage and testing
6.3.3 Safety measure for handling
6.3.4 Transportation
7 Battery onboard space vehicle
7.1 Performance
7.1.1 Purpose
7.1.2 Basic performance
7.1.3 Design requirement
7.1.4 Preparation for handling, transportation
7.2 Safety
7.2.1 Purpose
7.2.2 Definitions of dangerous phenomenon
7.2.3 Technical requirement
7.3 Logistics
7.3.1 Purpose
7.3.2 Safety measure for handling
7.3.3 Integration to the space vehicle
7.3.4 Battery maintenance on the space vehicle
7.3.5 Battery transportation equipped in space vehicle
8 Launch site
8.1 Performance
8.1.1 Purpose
8.1.2 Degradation calculation in launch site
8.2 Safety
8.2.1 Purpose
8.2.2 Definitions of dangerous phenomenon
8.3 Logistics
8.3.1 Purpose
8.3.2 Safety measure for handling
8.3.3 Preparation for transportation
8.3.4 Battery testing (health checking after transportation)
8.3.5 Battery storage at launch site
8.3.6 Integration to the space vehicle
8.3.7 Battery monitoring preceding launch
9 Mission in orbit and end of life
Annex A (normative) Parameter measurement tolerances
Annex B (informative) Example of cell qualification test
Annex C (informative) Hazard identification method
Annex D (normative) Safety measure for handling
Annex E (normative) Transportation
Bibliography
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
BS 185-18:1970
Glossary of aeronautical and astronautical terms, Astronautics
-
BS EN 13290-1:1999
Space project management. General requirements, Policy and principles
-
BS EN 14724:2003
Space project management. Tailoring of space standards
-
BS EN 14776:2004
Space engineering. Ground systems and operation. Telemetry and telecommand packet utilization
Foreword
Introduction
1 Scope
1.1 Life cycle
1.2 Performance
1.3 Safety
1.4 Logistics
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Cell
5.1 Performance
5.1.1 Purpose
5.1.2 Terminology
5.1.3 Requirement for quality assurance
5.1.4 Cell qualification test
5.1.5 Models for analysis
5.2 Safety
5.2.1 Purpose
5.2.2 Definitions and control of dangerous phenomenon
5.2.3 Safety testing
5.3 Logistics
5.3.1 Purpose
5.3.2 Cell manufacturing, storage and testing
5.3.3 Safety measure for handling
5.3.4 Cell transportation
6 Battery
6.1 Performance
6.1.1 Purpose
6.1.2 Terminology
6.1.3 Basic performance
6.1.4 Life test demonstration
6.1.5 Design requirements
6.1.6 Requirement of quality management
6.2 Safety
6.2.1 Purpose
6.2.2 Definitions of dangerous phenomenon
6.2.3 Technical requirement
6.2.4 Safety testing
6.3 Logistics
6.3.1 Purpose
6.3.2 Manufacture/assembly storage and testing
6.3.3 Safety measure for handling
6.3.4 Transportation
7 Battery onboard space vehicle
7.1 Performance
7.1.1 Purpose
7.1.2 Basic performance
7.1.3 Design requirement
7.1.4 Preparation for handling, transportation
7.2 Safety
7.2.1 Purpose
7.2.2 Definitions of dangerous phenomenon
7.2.3 Technical requirement
7.3 Logistics
7.3.1 Purpose
7.3.2 Safety measure for handling
7.3.3 Integration to the space vehicle
7.3.4 Battery maintenance on the space vehicle
7.3.5 Battery transportation equipped in space vehicle
8 Launch site
8.1 Performance
8.1.1 Purpose
8.1.2 Degradation calculation in launch site
8.2 Safety
8.2.1 Purpose
8.2.2 Definitions of dangerous phenomenon
8.3 Logistics
8.3.1 Purpose
8.3.2 Safety measure for handling
8.3.3 Preparation for transportation
8.3.4 Battery testing (health checking after transportation)
8.3.5 Battery storage at launch site
8.3.6 Integration to the space vehicle
8.3.7 Battery monitoring preceding launch
9 Mission in orbit and end of life
Annex A (normative) Parameter measurement tolerances
Annex B (informative) Example of cell qualification test
Annex C (informative) Hazard identification method
Annex D (normative) Safety measure for handling
Annex E (normative) Transportation
Bibliography