ISO 13680:2010
Petroleum and natural gas industries — Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock — Technical delivery conditions
ISO 13680:2010 specifies the technical delivery conditions for corrosion-resistant alloy seamless tubulars for casing, tubing and coupling stock for two product specification levels: PSL-1, which is the basis of ISO 13680:2010; PSL-2, which provides additional requirements for a product that is intended to be both corrosion resistant and cracking resistant for the environments and qualification method specified in ISO 15156-3 and Annex G of ISO 13680:2010.
At the option of the manufacturer, PSL-2 products can be provided in lieu of PSL-1.
The corrosion-resistant alloys included in ISO 13680:2010 are special alloys in accordance with ISO 4948-1 and ISO 4948-2.
ISO 13680:2010 is applicable to the following four groups of product: group 1, which is composed of stainless alloys with a martensitic or martensitic/ferritic structure; group 2, which is composed of stainless alloys with a ferritic-austenitic structure, such as duplex and super-duplex stainless alloy; group 3, which is composed of stainless alloys with an austenitic structure (iron base); group 4, which is composed of nickel-based alloys with an austenitic structure (nickel base).
ISO 13680:2010 contains no provisions relating to the connection of individual lengths of pipe.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$118.26 NZD
|
|
| HardCopy |
$152.17 NZD
|
|
| Networkable PDF |
Price varies
|
Scope
Conformance
Dual normative references
Units of measurement
Normative references
Terms, abbreviated terms, symbols and definitions
Terms and definitions
Symbols
Abbreviated terms
Information to be supplied by the purchaser
Manufacturing process
Manufacturing of corrosion-resistant alloys
Product manufacturing process
Pipe end sizing
Straightening
Process requiring validation
Traceability
Material requirements
Chemical composition
Tensile properties
Hardness properties
Charpy V-notch test properties — General requirements
Evaluation of test results
Critical thickness
Specimen size, orientation and hierarchy
Alternative size impact test specimens
Sub-size test specimens
Test temperature
Charpy V-notch — Absorbed energy requirements for coupling s
General
Requirements for all grades
Charpy V-notch — Absorbed energy requirements for pipe — All
Flattening requirements
Corrosion properties
Microstructure properties
Group 1
Group 2
Groups 3 and 4
Surface condition
Defects
Pipe
Coupling stock
Process control plan
Hydrostatic test
Dimensions, masses and tolerances
Outside diameter, wall thickness and mass
Length
Tolerances
Tolerance on outside diameter, wall thickness and mass
Inside diameter, d
Straightness
Drift requirements
Product ends
Inspection and testing
Test equipment
Type and frequency of tests
Testing of chemical composition
Chemical analysis
Test method
Chromium depletion test — Groups 2, 3 and 4
Testing of mechanical characteristics
Test lot
Selection and preparation of samples and test pieces
Tensile test
Orientation of test pieces
Test method
Invalidation of test
Retest
Hardness test
Test pieces
Test method
Invalidation of tests
Retests
Impact or flattening test
Test pieces
Frequency of testing
Impact test method
Flattening test method
Test method
Acceptance/rejection criteria
Impact test retest
Flattening test retest
Invalidation of tests
Microstructural examination
Test pieces
Test method
Retest
Dimensional testing
General
Outside diameter
Wall thickness at end of products
Wall thickness of pipe body
Drift test
Non-upset and external upset pipe
Internal upset pipe
Drift mandrel coating
Length
Straightness
Mass determination
Hydrostatic test
Visual inspection
General
Pipe body and coupling stock
Pipe ends
Disposition
Non-destructive examination
General
NDE personnel
Products
Pup joints
Untested ends
Upset ends
Reference standards
NDE system capability records
All product group 1
Full-body NDE of product — Groups 2, 3 and 4
Pipe and coupling stock requiring further evaluation
Evaluation of indications (prove-up)
Disposition of pipe containing defects
Disposition of coupling stock containing defects
Surface treatment
Group 1
Groups 2, 3 and 4
Marking
General
Marking on the product
Marking location and size
Colour-code identification
Die stamping
Paint or ink stencilling
Date of manufacture
Surface protection — Group 1
Documents
Electronic media
Retention of records
Test certificates
Handling, packaging and storage
General
Handling
Packaging
General
Identification
Storage
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 1518:2002
External extruded high-density-polyethylene coating system for pipes
-
AS/NZS 1518:2002 A1
External extruded high-density-polyethylene coating system for pipes: Amendment 1
-
AS/NZS 3862:2002
External fusion-bonded epoxy coating for steel pipes
-
BS 3604-2:1991
Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties., Specification for longitudinally arc welded tubes
Scope
Conformance
Dual normative references
Units of measurement
Normative references
Terms, abbreviated terms, symbols and definitions
Terms and definitions
Symbols
Abbreviated terms
Information to be supplied by the purchaser
Manufacturing process
Manufacturing of corrosion-resistant alloys
Product manufacturing process
Pipe end sizing
Straightening
Process requiring validation
Traceability
Material requirements
Chemical composition
Tensile properties
Hardness properties
Charpy V-notch test properties — General requirements
Evaluation of test results
Critical thickness
Specimen size, orientation and hierarchy
Alternative size impact test specimens
Sub-size test specimens
Test temperature
Charpy V-notch — Absorbed energy requirements for coupling s
General
Requirements for all grades
Charpy V-notch — Absorbed energy requirements for pipe — All
Flattening requirements
Corrosion properties
Microstructure properties
Group 1
Group 2
Groups 3 and 4
Surface condition
Defects
Pipe
Coupling stock
Process control plan
Hydrostatic test
Dimensions, masses and tolerances
Outside diameter, wall thickness and mass
Length
Tolerances
Tolerance on outside diameter, wall thickness and mass
Inside diameter, d
Straightness
Drift requirements
Product ends
Inspection and testing
Test equipment
Type and frequency of tests
Testing of chemical composition
Chemical analysis
Test method
Chromium depletion test — Groups 2, 3 and 4
Testing of mechanical characteristics
Test lot
Selection and preparation of samples and test pieces
Tensile test
Orientation of test pieces
Test method
Invalidation of test
Retest
Hardness test
Test pieces
Test method
Invalidation of tests
Retests
Impact or flattening test
Test pieces
Frequency of testing
Impact test method
Flattening test method
Test method
Acceptance/rejection criteria
Impact test retest
Flattening test retest
Invalidation of tests
Microstructural examination
Test pieces
Test method
Retest
Dimensional testing
General
Outside diameter
Wall thickness at end of products
Wall thickness of pipe body
Drift test
Non-upset and external upset pipe
Internal upset pipe
Drift mandrel coating
Length
Straightness
Mass determination
Hydrostatic test
Visual inspection
General
Pipe body and coupling stock
Pipe ends
Disposition
Non-destructive examination
General
NDE personnel
Products
Pup joints
Untested ends
Upset ends
Reference standards
NDE system capability records
All product group 1
Full-body NDE of product — Groups 2, 3 and 4
Pipe and coupling stock requiring further evaluation
Evaluation of indications (prove-up)
Disposition of pipe containing defects
Disposition of coupling stock containing defects
Surface treatment
Group 1
Groups 2, 3 and 4
Marking
General
Marking on the product
Marking location and size
Colour-code identification
Die stamping
Paint or ink stencilling
Date of manufacture
Surface protection — Group 1
Documents
Electronic media
Retention of records
Test certificates
Handling, packaging and storage
General
Handling
Packaging
General
Identification
Storage