ISO 11890-2:2013
Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 2: Gas-chromatographic method
ISO 11890-2:2013 is one of a series of standards dealing with the sampling and testing of paints, varnishes and related products.
It specifies a method for the determination of the volatile organic compound (VOC) content of paints, varnishes and their raw materials. This part is preferred if the expected VOC content is greater than 0,1 % by mass and less than about 15 % by mass. When the VOC content is greater than about 15 % by mass, the less complicated method given in ISO 11890‑1 may be used.
This method assumes that the volatile matter is either water or organic. However, other volatile inorganic compounds can be present and might need to be quantified by another suitable method and allowed for in the calculations.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$118.26 NZD
|
|
| HardCopy |
$152.17 NZD
|
|
| Networkable PDF |
Price varies
|
Section sec_1
Section sec_2
Section sec_3
Section sec_4
Section sec_5
Section sec_6
Section sec_6.1
Section sec_6.2
Section sec_6.2.1
Section sec_6.2.2
Section sec_6.2.3
Section sec_6.2.4
Section sec_6.3
Section sec_6.4
Section sec_6.4.1
Section sec_6.4.2
Section sec_6.4.3
Section sec_6.5
Section sec_6.6
Section sec_6.7
Section sec_6.8
Section sec_6.9
Section sec_6.10
Section sec_6.11
Section sec_6.12
Section sec_6.12.1
Section sec_6.12.2
Section sec_6.12.3
Section sec_7
Section sec_7.1
Section sec_7.2
Section sec_7.3
Section sec_7.4
Section sec_8
Section sec_9
Section sec_9.1
Section sec_9.2
Section sec_9.3
Section sec_9.3.1
Section sec_9.3.2
Section sec_9.4
Section sec_9.5
Section sec_9.5.1
Section sec_9.5.1.1
Section sec_9.5.1.2
Section sec_9.5.1.3
Section sec_9.5.2
Section sec_9.6
Section sec_9.7
Section sec_9.7.1
Section sec_9.7.2
Section sec_9.7.3
Section sec_9.7.4
Section sec_10
Section sec_10.1
Section sec_10.2
Section sec_10.3
Section sec_10.4
Section sec_10.5
Section sec_11
Section sec_12
Section sec_12.1
Section sec_12.2
Section sec_12.3
Table tab_1
Section sec_13
Annex sec_A
Annex sec_B
Annex sec_B.1
Annex sec_B.2
Annex sec_B.3
Annex sec_B.4
Reference ref_1
Reference ref_2
Reference ref_3
Reference ref_4
Reference ref_5
Reference ref_6
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Required supplementary information
6 Apparatus
6.1 Gas chromatograph
6.2 Sample injection system
6.3 Oven
6.4 Detector
6.5 Capillary column
6.6 Qualitative-analysis equipment
6.7 Injection syringe
6.8 Chart recorder
6.9 Integrator
6.10 Sample vials
6.11 Gas filters
6.12 Gases
7 Reagents
7.1 Internal standard
7.2 Calibration compounds
7.3 Dilution solvent
7.4 Marker compound
8 Sampling
9 Procedure
9.1 Density
9.2 Water content
9.3 Gas-chromatographic conditions
9.4 Qualitative analysis of product
9.5 Calibration
9.6 Sample preparation
9.7 Quantitative determination of compound content
10 Calculation
10.1 General
10.2 Method 1: VOC content, as a percentage by mass, of the product “ready for use”
10.3 Method 2: VOC content, in grams per litre, of the product “ready for use”
10.4 Method 3: VOC content, in grams per litre, of the product “ready for use” less water
10.5 Method 4: VOC content, in grams per litre, of the product “ready for use” less water and less exempt compounds (only required if national legislation applies)
11 Expression of results
12 Precision
12.1 General
12.2 Repeatability limit r
12.3 Reproducibility limit R
13 Test report
Annex A (normative) Required supplementary information
Annex B (informative) Examples of gas-chromatographic conditions
Bibliography
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 1580.101.1:1999
Methods of test for paints and related materials - Conditions of test - Temperature, humidity and airflow control
-
AS/NZS 1580.101.4:1999
Methods of test for paints and related materials - Conditions of test - Temperature control
-
AS/NZS 1580.101.5:1999
Methods of test for paints and related materials - Conditions of test - Temperature and humidity control
-
AS/NZS 1580.102.2:1995
Methods of test for paints and related materials - In-process sampling
Section sec_1
Section sec_2
Section sec_3
Section sec_4
Section sec_5
Section sec_6
Section sec_6.1
Section sec_6.2
Section sec_6.2.1
Section sec_6.2.2
Section sec_6.2.3
Section sec_6.2.4
Section sec_6.3
Section sec_6.4
Section sec_6.4.1
Section sec_6.4.2
Section sec_6.4.3
Section sec_6.5
Section sec_6.6
Section sec_6.7
Section sec_6.8
Section sec_6.9
Section sec_6.10
Section sec_6.11
Section sec_6.12
Section sec_6.12.1
Section sec_6.12.2
Section sec_6.12.3
Section sec_7
Section sec_7.1
Section sec_7.2
Section sec_7.3
Section sec_7.4
Section sec_8
Section sec_9
Section sec_9.1
Section sec_9.2
Section sec_9.3
Section sec_9.3.1
Section sec_9.3.2
Section sec_9.4
Section sec_9.5
Section sec_9.5.1
Section sec_9.5.1.1
Section sec_9.5.1.2
Section sec_9.5.1.3
Section sec_9.5.2
Section sec_9.6
Section sec_9.7
Section sec_9.7.1
Section sec_9.7.2
Section sec_9.7.3
Section sec_9.7.4
Section sec_10
Section sec_10.1
Section sec_10.2
Section sec_10.3
Section sec_10.4
Section sec_10.5
Section sec_11
Section sec_12
Section sec_12.1
Section sec_12.2
Section sec_12.3
Table tab_1
Section sec_13
Annex sec_A
Annex sec_B
Annex sec_B.1
Annex sec_B.2
Annex sec_B.3
Annex sec_B.4
Reference ref_1
Reference ref_2
Reference ref_3
Reference ref_4
Reference ref_5
Reference ref_6
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Required supplementary information
6 Apparatus
6.1 Gas chromatograph
6.2 Sample injection system
6.3 Oven
6.4 Detector
6.5 Capillary column
6.6 Qualitative-analysis equipment
6.7 Injection syringe
6.8 Chart recorder
6.9 Integrator
6.10 Sample vials
6.11 Gas filters
6.12 Gases
7 Reagents
7.1 Internal standard
7.2 Calibration compounds
7.3 Dilution solvent
7.4 Marker compound
8 Sampling
9 Procedure
9.1 Density
9.2 Water content
9.3 Gas-chromatographic conditions
9.4 Qualitative analysis of product
9.5 Calibration
9.6 Sample preparation
9.7 Quantitative determination of compound content
10 Calculation
10.1 General
10.2 Method 1: VOC content, as a percentage by mass, of the product “ready for use”
10.3 Method 2: VOC content, in grams per litre, of the product “ready for use”
10.4 Method 3: VOC content, in grams per litre, of the product “ready for use” less water
10.5 Method 4: VOC content, in grams per litre, of the product “ready for use” less water and less exempt compounds (only required if national legislation applies)
11 Expression of results
12 Precision
12.1 General
12.2 Repeatability limit r
12.3 Reproducibility limit R
13 Test report
Annex A (normative) Required supplementary information
Annex B (informative) Examples of gas-chromatographic conditions
Bibliography