ISO 10855-3:2018
Offshore containers and associated lifting sets — Part 3: Periodic inspection, examination and testing
This document specifies requirements for the periodic inspection, examination and testing of offshore freight and service containers, built in accordance with ISO 10855‑1, with maximum a gross mass not exceeding 25 000 kg and their associated lifting sets, intended for repeated use to, from and between offshore installations and ships. Inspection requirements following damage and repair of offshore containers are also included.
Recommended knowledge and experience of staff responsible for inspection of offshore containers is given in Annex B.
Recommended knowledge and experience of staff responsible for inspection of lifting sets intended for use with offshore containers is given in Annex C.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$118.26 NZD
|
|
| HardCopy |
$152.17 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Container inspection plate
5.1 General
5.2 Contents of inspection plate
6 Schedule of periodic inspection/examination and test — Containers
7 Container lifting test
7.1 General
7.2 Test equipment and calibration
8 Non-destructive examination (NDE) of welds
8.1 General
8.2 NDE methods
8.3 Use of Eddy Current Testing at periodic inspections
8.4 NDE operators
9 Visual inspection
9.1 General
9.2 Markings
9.3 Welds
9.4 Pad eyes and lashing points
9.5 Structure
9.6 Door closures
9.7 Floor
10 Marking of the inspection plate
11 Inspection report
12 Record keeping
13 Damage and repair procedures
14 Schedule of inspection/examination and test — Lifting sets
15 Inspection of attachment of lifting set to an offshore container
15.1 Attachment
15.2 Inspection report
15.3 Record keeping
16 Pre-trip inspections
Annex A (informative) Regulations for offshore containers
Annex B (informative) Recommended knowledge and experience of staff responsible for inspection of offshore containers
Annex C (informative) Recommended knowledge and experience of staff responsible for inspection of lifting sets intended for use with offshore containers
Bibliography
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
BS EN 10300:2005
Steel tubes and fittings for onshore and offshore pipelines. Bitumen hot applied materials for external coating
-
BS EN 10301:2003
Steel tubes and fittings for on and offshore pipelines. Internal coating for the reduction of friction for conveyance of non corrosive gas
-
BS EN 13173:2001
Cathodic protection for steel offshore floating structures
-
BS EN 16808:2020
Petroleum, petrochemical and natural gas industries. Safety of machineries. Manual elevators
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Container inspection plate
5.1 General
5.2 Contents of inspection plate
6 Schedule of periodic inspection/examination and test — Containers
7 Container lifting test
7.1 General
7.2 Test equipment and calibration
8 Non-destructive examination (NDE) of welds
8.1 General
8.2 NDE methods
8.3 Use of Eddy Current Testing at periodic inspections
8.4 NDE operators
9 Visual inspection
9.1 General
9.2 Markings
9.3 Welds
9.4 Pad eyes and lashing points
9.5 Structure
9.6 Door closures
9.7 Floor
10 Marking of the inspection plate
11 Inspection report
12 Record keeping
13 Damage and repair procedures
14 Schedule of inspection/examination and test — Lifting sets
15 Inspection of attachment of lifting set to an offshore container
15.1 Attachment
15.2 Inspection report
15.3 Record keeping
16 Pre-trip inspections
Annex A (informative) Regulations for offshore containers
Annex B (informative) Recommended knowledge and experience of staff responsible for inspection of offshore containers
Annex C (informative) Recommended knowledge and experience of staff responsible for inspection of lifting sets intended for use with offshore containers
Bibliography