ISO 10256-4:2016
Protective equipment for use in ice hockey — Part 4: Head and face protection for goalkeepers
ISO 10256-4:2016 covers performance requirements for head and face protectors to be used by ice hockey goalkeepers. It is intended to be read in conjunction with ISO 10256‑1, ISO 10256‑2 and ISO 10256‑3.
Performance requirements are established, where appropriate for the following:
a) materials, assembly, and design;
b) protected areas (coverage) and penetration resistance;
c) shock absorption;
d) puck impact resistance;
e) retention;
f) optical quality.
NOTE 1 The requirements of a clause take precedent over a figure.
NOTE 2 The intent of this part of ISO 10256 is to reduce the risk of injury to the head and face of ice hockey goalkeepers without compromising the form and appeal of the game.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$126.00 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 General
4.2 Design
4.2.1 Padding
4.2.2 Load-bearing area
4.2.3 Welded wire components
4.2.4 Overlap
4.2.5 Minimum distance (headform to face protector)
4.2.6 Maximum distance (headform to face protector)
4.3 Protected areas (coverage)
4.3.1 Protected area of the head
4.3.2 Protected area of the face
4.4 Penetration resistance
4.4.1 General
4.4.2 Types D1 and D2
4.4.3 Type D3
4.5 Shock-absorbing capacity
4.6 Puck impact resistance
4.6.1 Contact test
4.6.2 Toughness test
4.7 Retention system
4.8 Field of vision
5 Test methods
5.1 General
5.1.1 Tolerances and uncertainty estimations
5.1.2 Samples
5.1.3 Component assemblies
5.2 Conditioning
5.3 Protector positioning
5.4 Protected area (coverage) test
5.4.1 Protected area of the head
5.4.2 Protected area of the face
5.4.3 Coverage test
5.5 Penetration test
5.5.1 Test apparatus
5.5.2 Procedures
5.6 Shock absorbing capacity test
5.7 Puck impact resistance test
6 Test report
7 Permanent marking
8 Information for users
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 1067.1:2016
Eye and face protection - Sunglasses and fashion spectacles - Part 1: Requirements -
AS/NZS 1067.2:2016
Eye and face protection - Sunglasses and fashion spectacles - Part 2: Test methods -
AS/NZS 1270:2002
Acoustics - Hearing protectors
-
AS/NZS 1336:2014
Eye and face protection - Guidelines
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 General
4.2 Design
4.2.1 Padding
4.2.2 Load-bearing area
4.2.3 Welded wire components
4.2.4 Overlap
4.2.5 Minimum distance (headform to face protector)
4.2.6 Maximum distance (headform to face protector)
4.3 Protected areas (coverage)
4.3.1 Protected area of the head
4.3.2 Protected area of the face
4.4 Penetration resistance
4.4.1 General
4.4.2 Types D1 and D2
4.4.3 Type D3
4.5 Shock-absorbing capacity
4.6 Puck impact resistance
4.6.1 Contact test
4.6.2 Toughness test
4.7 Retention system
4.8 Field of vision
5 Test methods
5.1 General
5.1.1 Tolerances and uncertainty estimations
5.1.2 Samples
5.1.3 Component assemblies
5.2 Conditioning
5.3 Protector positioning
5.4 Protected area (coverage) test
5.4.1 Protected area of the head
5.4.2 Protected area of the face
5.4.3 Coverage test
5.5 Penetration test
5.5.1 Test apparatus
5.5.2 Procedures
5.6 Shock absorbing capacity test
5.7 Puck impact resistance test
6 Test report
7 Permanent marking
8 Information for users