AS/NZS 61558.2.9:2025
Safety of transformers, reactors, power supply units and combinations thereof – Part 2.9: Particular requirements and tests for transformers and power supply units for class III handlamps
Standard deals with the safety of transformers for class III handlamps and power supply units incorporating transformers for class III handlamps. Transformers incorporating electronic circuits are also covered by this document.
NOTE: Safety includes electrical, thermal and mechanical aspects.
Unless otherwise specified, from here onward, the term transformer covers transformers for class III handlamps and power supply units incorporating transformers for class III handlamps.
For power supply units (linear) this document is applicable. For switch mode power supply units IEC 61558-2-16 is applicable together with this document. Where two requirements are in conflict, the most severe takes precedence.
This document is applicable to stationary or portable, single-phase, air-cooled (natural or forced) independent or associated dry-type transformers. The windings can be encapsulated or non-encapsulated.
The rated supply voltage does not exceed 1 000 V AC and the rated supply frequency and the internal operating frequencies do not exceed 500 Hz.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$123.30 NZD
|
|
| HardCopy |
$137.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS NZS 61558.2.9 2025
Preface
AUSTRALIAN NATIONAL VARIATIONS
NEW ZEALAND NATIONAL VARIATIONS
Annex ANZ
IEC 61558-2-9
English
CONTENTS
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 General notes on tests
6 Ratings
7 Classification
8 Marking and other information
9 Protection against electric shock
10 Change of input voltage setting
11 Output voltage and output current under load
12 No-load output voltage
13 Short-circuit voltage
14 Heating
15 Short-circuit and overload protection
16 Mechanical strength
17 Protection against harmful ingress of dust, solid objects and moisture
18 Insulation resistance, dielectric strength and leakage current
19 Construction
20 Components
21 Internal wiring
22 Supply connection and other external flexible cables or cords
23 Terminals for external conductors
24 Provisions for protective earthing
25 Screws and connections
26 Creepage distances, clearances and distances through insulation
27 Resistance to heat, fire and tracking
28 Resistance to rusting
Annexes
Bibliography
Table 101 – Symbols indicating the kind of transformer
Table 102 – Output voltage ratio
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 3194:2015
Approval and test specification - Electric shaver supply units -
AS/NZS 60076.1:2014
Power transformers - Part 1: General -
AS/NZS 60076.10:2009
Power transformers - Part 10: Determination of sound levels -
AS/NZS 60076.10.1:2023
Power transformers, Part 10.1: Determination of sound levels - Application guide
AS NZS 61558.2.9 2025
Preface
AUSTRALIAN NATIONAL VARIATIONS
NEW ZEALAND NATIONAL VARIATIONS
Annex ANZ
IEC 61558-2-9
English
CONTENTS
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 General notes on tests
6 Ratings
7 Classification
8 Marking and other information
9 Protection against electric shock
10 Change of input voltage setting
11 Output voltage and output current under load
12 No-load output voltage
13 Short-circuit voltage
14 Heating
15 Short-circuit and overload protection
16 Mechanical strength
17 Protection against harmful ingress of dust, solid objects and moisture
18 Insulation resistance, dielectric strength and leakage current
19 Construction
20 Components
21 Internal wiring
22 Supply connection and other external flexible cables or cords
23 Terminals for external conductors
24 Provisions for protective earthing
25 Screws and connections
26 Creepage distances, clearances and distances through insulation
27 Resistance to heat, fire and tracking
28 Resistance to rusting
Annexes
Bibliography
Table 101 – Symbols indicating the kind of transformer
Table 102 – Output voltage ratio
AS/NZS 61558.2.9:2025
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.