Drinking-Water Standards For New Zealand 2005 (Revised 2008) (Revoked)
Ministry: Ministry of Health
Section: 5.11.1.9
Citation context:
Validation testing must have third-party verification by an agency accredited to ISO/IEC 17025...
Animal Products (Recognised Agencies and Persons Specifications) Notice 2011 - Revoked
Ministry: Ministry for Primary Industries
Section: 11
Citation context:
Accreditation requirements for recognition of laboratories: Every testing and calibration laboratory (including laboratories operating under the Laboratory Approval Scheme) seeking to be a recognised agency under the Act must be— (a) accredited by IANZ in accordance with ISO 17025 and any additional requirements specified by the Director General; or...
Wine (Laboratories Recognised for Export Testing) Notice 2011 (revoked)
Ministry: Ministry for Primary Industries
Section: 21(1)
Citation context:
Under section 121 of the Act, NZS ISO/IEC 17025:2005, which is the current edition of the Australian/New Zealand Standard on “General Requirements for the Competence of Testing and Calibration Laboratories (the “Standard”), is incorporated by reference into, and form part of, this notice.
Wine (Recognised Laboratories) Notice 2007 (revoked)
Ministry: Ministry for Primary Industries
Section: 4 Interpretation
Citation context:
ISO 17025 refers to the standard NZS ISO/IEC 17025:2005 which is the current edition of the Australian/New Zealand Standard on "General Requirements for the Competence of Testing and Calibration Laboratories", and at any particular time refers to the late
Wine (Recognised Laboratories) Notice 2007 (revoked)
Ministry: Ministry for Primary Industries
Section: 6(2)
Citation context:
To maintain its recognition, the recognised agency must- ... (b) be assessed by the accreditation body annually from the date of the recognition to confirm it continues to meet the requirements of ISO 17025, and a copy of the relevant parts of this assess
Laboratories Recognised for Testing of Wine for Export
Ministry: Ministry for Primary Industries
Section: 1.4
Citation context:
The following documents are incorporated by reference, under section 121 of the Act, and form part of this Notice: a) NZS ISO/IEC 17025:2005, General Requirements for the Competence of Testing and Calibration Laboratories” (the “Standard”)....
Laboratories Recognised for Testing of Wine for Export
Ministry: Ministry for Primary Industries
Section: 2.1
Citation context:
A recognised laboratory must: a) be accredited in relation to relevant methods used for the analysis of export wine samples by an accreditation body to the standards for testing laboratories set out in ISO 17025; and b) meet the requirements of ISO 17025 and ... ...c) be assessed by an accreditation body at least annually from the date of recognition to confirm that it continues to meet the requirements of ISO 17025 and ...
Laboratories Recognised for Testing of Wine for Export
Ministry: Ministry for Primary Industries
Section: Schedule 1 - Definitions
Citation context:
ISO17025: a) refers to the standard NZS ISO/IEC 17025:2005 which is the current edition of the Australian/New Zealand Standard on “General Requirements for the Competence of Testing and Calibration Laboratories”, incorporated by reference into this notice under clause 1.4; and b) includes the latest edition of that standard, together with any additions, amendments, and deletions made to or from that standard notified by amending instrument in accordance with section 121(4) of the Act.
Animal Products (Recognised Agencies and Persons Specifications) Notice 2011 - Revoked
Ministry: Ministry for Primary Industries
Section: 4 Interpretation
Citation context:
ISO 17025 refers to the standard NZS/ISO/IEC 17025:2005 which is the current edition of the New Zealand Standard on "General requirements for the competence of testing and calibration laboratories"; this refers to the latest edition of that standard, together with any additions, amendments, and deletions made to or from that standard up to that time.
Wine (Laboratories Recognised for Export Testing) Notice 2011 (revoked)
Ministry: Ministry for Primary Industries
Section: 5(1) Interpretation
Citation context:
ISO 17025: (a) refers to the standard NZS ISO/IEC 17025:2005 which is the current edition of the Australian/New Zealand Standard on “General Requirements for the Competence of Testing and Calibration Laboratories”, incorporated by reference into this notice under clause 21; and (b) includes the latest edition of that standard, together with any additions, amendments, and deletions made to or from that standard notified by amending instrument in accordance with section 121(4) of the Act
Drinking-Water Standards For New Zealand 2005 (Revised 2008) (Revoked)
Ministry: Ministry of Health
Section: 3.1.1
Citation context:
Laboratories conducting compliance testing must be recognised for the purpose by the Ministry of Health. This requires the laboratory to demonstrate compliance with the relevant clauses of the General Requirements for the Competence of Testing and Calibra
Drinking-Water Standards For New Zealand 2005 (Revised 2008) (Revoked)
Ministry: Ministry of Health
Section: 5.16.2
Citation context:
The validation certificate must define the operating conditions under which the reactor can deliver the UV dose required by the validation procedure. The validation testing must have third-party verification by an agency accredited to ISO/IEC 17025...
Drinking-Water Standards For New Zealand 2005 (Revised 2008) (Revoked)
Ministry: Ministry of Health
Section: 5.16.3.2b(i)
Citation context:
The reference sensor must be standardised at least annually in accordance with Ultraviolet Disinfection Guidance Manual (USEPA 2006b) or other traceable procedure, with third-party verification given by an agency accredited to ISO/IEC 17025 for this type
Drinking-Water Standards For New Zealand 2005 (Revised 2008) (Revoked)
Ministry: Ministry of Health
Section: A1.2.2
Citation context:
The General Requirements for the Competence of Testing and Calibration Laboratories (NZS ISO/IEC 17025:2005, IANZ 2005) requires laboratories to calculate their uncertainty of measurement...
Wine (Recognised Laboratories) Notice 2007 (revoked)
Ministry: Ministry for Primary Industries
Section: 6(1)
Citation context:
To be recognised, every agency must- (a) be accredited by an accreditation body in accordance with ISO 17025; or (b) have demonstrated performance to a standard equivalent to ISO 17025, to the satisfaction of the Director General, pending accreditation in
Health and Safety at Work (Hazardous Substances) Regulations 2017
Ministry: WorkSafe New Zealand
Section: 15.52(1)
Citation context:
WorkSafe may, on application by a PCBU, authorise that PCBU as a test station to inspect and test cylinders and to issue test reports, in accordance with regulations 15.56 and 15.59(2), if it is satisfied that—(b) the PCBU conducts tests in accordance with 1 of the following standards, as evidenced by accreditation of the PCBU under NZS ISO/IEC 17025:2005 or membership of a body that is recognised by WorkSafe...
Drinking-water Standards for New Zealand 2005 - Revised 2018
Ministry: Ministry of Health
Section: 5.16.3
Citation context:
b. Reference sensors: i. The reference sensor must be standardised at least annually in accordance with Ultraviolet Disinfection Guidance Manual (USEPA 2006b) or other traceable procedure, with third-party verification given by an agency accredited to ISO/IEC 17025 (IANZ 2005) for this type of standardisation, or by the Measurement Standards Laboratory of New Zealand (or accreditation to an equivalent standard accepted by the Ministry of Health)....
Drinking-water Standards for New Zealand 2005 - Revised 2018
Ministry: Ministry of Health
Section: References
Citation context:Drinking-water Standards for New Zealand 2005 - Revised 2018
Ministry: Ministry of Health
Section: A1.2.2
Citation context:
The General Requirements for the Competence of Testing and Calibration Laboratories (NZS ISO/IEC 17025) (IANZ 2005) requires laboratories to calculate their uncertainty of measurement; see International Accreditation New Zealand’s Technical Guide TG5 (IANZ 2004) and section 17.6 of the Guidelines.
Drinking-water Standards for New Zealand 2005 - Revised 2018
Ministry: Ministry of Health
Section: 3.1.1
Citation context:
Organisations conducting compliance or validation testing must be recognised for the purpose by the Ministry of Health. This requires demonstration of compliance with the relevant clauses of the General Requirements for the Competence of Testing and Calibration Laboratories (NZS ISO/IEC 17025) (IANZ 2005). Special procedures may be authorised in writing by the Ministry for small or remote drinking-water supplies.
Gas (Safety And Measurement) Regulations 2010
Ministry: WorkSafe New Zealand - Energy Safety
Section: Schedule 1
Citation context:
AS/NZS (sic) ISO/IEC 17025: International Organization for Standardization Standard known as ISO/IEC 17025:2005 (General requirements for the competence of testing and calibration laboratories)
Animal Products Notice: Specifications for Laboratories
Ministry: Ministry for Primary Industries
Section: 1.1(1) a)
Citation context:
Under section 168 of the Act, the following documents are incorporated into, and form part of this Notice as standard works of reference: a) The current edition of the New Zealand Standard ISO/IEC 17025 "General requirements for the competence of testing and calibration laboratories".
Animal Products (Recognised Agencies and Persons Specifications) Notice 2015
Ministry: Ministry for Primary Industries
Section: Interpretation
Citation context:
ISO 17025 refers to the standard NZS/ISO/IEC 17025:2005 which is the current edition of the New Zealand Standard on "General requirements for the competence of testing and calibration laboratories"; this refers to the latest edition of that standard, together with any additions, amendments, and deletions made to or from that standard up to that time
Drinking-water Standards for New Zealand 2005 - Revised 2018
Ministry: Ministry of Health
Section: 5.11.1
Citation context:
7. Validation testing must have third-party verification by an agency accredited to ISO/IEC 17025 (IANZ 2005) or by the Measurement Standards Laboratory of New Zealand (or accreditation to an equivalent standard accepted by the Ministry of Health).
