NZS 62282.3.300:2025
Fuel cell technologies Part 3.300: Stationary fuel cell power systems – Installation
The objective of this standard is to provide performance-based requirements for the minimum safe installation of indoor and outdoor fuel cell power systems in compliance with NZS 62282.3.100, Fuel cell technologies − Part 3.100: Stationary fuel cell power systems − Safety, and applies to the installation of systems:
- Intended for electrical connection to mains directly or with a readily accessible, manually operable switch or circuit-breaker;
- Intended for a stand-alone power distribution system;
- Intended to provide AC or DC power;
- With or without the ability to recover useful heat.
This standard was prepared by the Standards New Zealand P3652 committee and has been reproduced as a modified adoption of IEC 62282-3-300:2012, Fuel cell technologies – Part 3-300: Stationary fuel cell power systems – Installation.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$131.63 NZD
|
|
| HardCopy |
$146.25 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
NZS 62282.3.300 2025
Committee representation
Acknowledgement
Copyright
Referenced documents
Latest revisions
Review of standards
Preface
New Zealand national variations
NZS 62282.3.300 2025 Text
English
CONTENTS
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General safety requirements and strategy
5 Siting considerations
5.1 General siting
5.2 Outdoor installations
5.2.1 Air intakes and vents
5.2.2 Air intakes and exhaust
5.2.3 Exhaust outlets
5.2.4 Area around outlets
5.2.5 Enclosures
5.3 Indoor installations
5.3.1 General
5.3.2 Small fuel cell power systems
5.4 Rooftop installation
6 Ventilation and exhaust
6.1 General
6.2 Ventilation
6.3 Exhaust system
6.3.1 General
6.3.2 Small fuel cell systems
6.4 Purging and venting processes
7 Fire protection and gas detection
7.1 Fire protection and detection
7.1.1 Site fire protection
7.1.2 Combustible gas detection (indoor installations only)
7.2 Fire prevention and emergency planning
8 Interconnections with site interfaces
8.1 General
8.2 Connections to fuel supplies – General
8.3 Fuel shut-off and piping
8.4 Connections to auxiliary media supply and media disposal
8.4.1 General
8.4.2 Combustible auxiliary gases
8.4.3 Non-combustible or inert auxiliary gases
8.4.4 Water
8.4.5 Waste water and condensate disposal
8.4.6 Discharge pipe
9 Environmental requirements
10 Approval tests
10.1 Gas leakage
10.2 Site specific shut-down devices
11 Maintenance tests
12 Documentation
12.1 Markings and instructions
12.2 Inspection checklist
12.3 Installation manual
12.4 User’s information manual
12.5 Maintenance manual
Figure 1 – Fuel cell power system
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
Safety of machinery - Part 1303: Risk assessment - Practical guidance and examples of methods
Related Information
Similar Standards
-
BS EN 50465:2015+A1:2019
Gas appliances. Combined heat and power appliance of nominal heat input inferior or equal to 70 kW
-
BS EN 62282-2:2012
Fuel cell technologies, Fuel cell modules
-
BS EN 62282-3-200:2016
Fuel cell technologies, Stationary fuel cell power systems. Performance test methods
-
BS EN 62282-3-201:2017+A1:2022
Fuel cell technologies, Stationary fuel cell power systems. Performance test methods for small fuel cell power systems
NZS 62282.3.300 2025
Committee representation
Acknowledgement
Copyright
Referenced documents
Latest revisions
Review of standards
Preface
New Zealand national variations
NZS 62282.3.300 2025 Text
English
CONTENTS
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General safety requirements and strategy
5 Siting considerations
5.1 General siting
5.2 Outdoor installations
5.2.1 Air intakes and vents
5.2.2 Air intakes and exhaust
5.2.3 Exhaust outlets
5.2.4 Area around outlets
5.2.5 Enclosures
5.3 Indoor installations
5.3.1 General
5.3.2 Small fuel cell power systems
5.4 Rooftop installation
6 Ventilation and exhaust
6.1 General
6.2 Ventilation
6.3 Exhaust system
6.3.1 General
6.3.2 Small fuel cell systems
6.4 Purging and venting processes
7 Fire protection and gas detection
7.1 Fire protection and detection
7.1.1 Site fire protection
7.1.2 Combustible gas detection (indoor installations only)
7.2 Fire prevention and emergency planning
8 Interconnections with site interfaces
8.1 General
8.2 Connections to fuel supplies – General
8.3 Fuel shut-off and piping
8.4 Connections to auxiliary media supply and media disposal
8.4.1 General
8.4.2 Combustible auxiliary gases
8.4.3 Non-combustible or inert auxiliary gases
8.4.4 Water
8.4.5 Waste water and condensate disposal
8.4.6 Discharge pipe
9 Environmental requirements
10 Approval tests
10.1 Gas leakage
10.2 Site specific shut-down devices
11 Maintenance tests
12 Documentation
12.1 Markings and instructions
12.2 Inspection checklist
12.3 Installation manual
12.4 User’s information manual
12.5 Maintenance manual
Figure 1 – Fuel cell power system
NZS 62282.3.300:2025
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.