NZS 4211:2008
Specification for performance of windows
Specifies requirements for the performance of windows to be installed in exterior walls within the wind pressure limitations of the wind zones defined in table 5 and table 6. The properties covered are strength, stiffness, operating facility, air infiltration, and water penetration. This Standard specifically excludes skylights or roof windows, interior windows, fixed louvres, the weathertightness of the window perimeter in the external wall or facade, the fire rating, building facades, and durability.NZS 4211:2008
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
|
Download |
| HardCopy |
$121.00 NZD
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
NZS 4211:2008
COMMITTEE REPRESENTATION
ACKNOWLEDGEMENT
COPYRIGHT
CONTENTS
Section
REFERENCED DOCUMENTS
LATEST REVISIONS
REVIEW OF STANDARDS
OUTCOME STATEMENT
FOREWORD
1 GENERAL
1.1 Scope
1.2 Interpretation
1.3 Purpose of this Standard
1.4 Specific design
2 DEFINITIONS AND ABBREVIATIONS
2.1 Definitions
2.2 Abbreviations
3 SEQUENCE OF MEASUREMENTS AND TESTS
4 TESTING, MARKING, AND REPORTING
5 PERFORMANCE CRITERIA
6 SERVICEABILITY DEFLECTION
7 OPERATING OF OPENING SASHES
8 AIR INFILTRATION
9 WATER PENETRATION
10 ULTIMATE STRENGTH
1 1 TORSIONAL STRENGTH OF SASHES
Appendix
APPENDIX A – SASH TORSIONAL TEST
APPENDIX B – SPRAY NOZZLE LAYOUT
Table
Table 1 – SLS test pressures for windows not requiring specific design
Table 2 – Maximum operating force for opening sashes and doors
Table 3 – Air infiltration
Table 4 – Water test pressures for windows not requiring specific design
Table 5 – ULS test pressures for windows not requiring specific design
Table 6 – Extreme wind zones
Figure
Figure 1 – Allowable dimensional increase
Figure 2 – Torsional test rig assembly
Figure B1 – Spray nozzle layout for water application
- B1
- E2
Amendments
Previous versions
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Copyright in the standards listed on this page is either Crown copyright, or is owned by the Crown in right of New Zealand, administered by the New Zealand Standards Executive.
Access to this standard has been sponsored by the Ministry of Business, Innovation and Employment under copyright licence LN001319.
You are permitted to view and print one single copy of the PDF version of this standard free of charge (subject to printing costs) for your own personal use. You are not permitted to reproduce or distribute any part of this standard without prior written permission from Standards New Zealand, on behalf of the New Zealand Standards Executive, unless your actions are covered by Part 3 of the Copyright Act 1994.
For queries about copyright, please contact Standards New Zealand at copyright@standards.govt.nz.
Related Information
Building Code Compliance Document E2
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: VM1
Citation context:Building Code Compliance Document B1
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: VM1
Citation context:Building Code Compliance Document B1
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: VM1
Citation context:Refers to 4211:2008(NZS)A1.
Building Code Compliance Document E2
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: VM1
Citation context:Refers to 4211:2008(NZS)A1.
Guide to tolerances, materials and workmanship in new residential construction 2015
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: 5. Windows and doors
Citation context:Windows leak under conditions that fall within the rated weather/airtightness of the unit... ...See NZS 4211:2008 – Specification for performance of windows.
Similar Standards
-
AS/NZS 1905.1:1997
Components for the protection of openings in fire-resistant walls - Fire-resistant doorsets
-
AS/NZS 4420.1:2016
Windows, external glazed, timber and composite doors - Methods of test - Part 1: Test sequence, sampling and test methods -
AS/NZS 4505:2012
Garage doors and other large access doors -
AS/NZS 4505:2012 A1
Garage doors and other large access doors: Amendment 1:2015
NZS 4211:2008
COMMITTEE REPRESENTATION
ACKNOWLEDGEMENT
COPYRIGHT
CONTENTS
Section
REFERENCED DOCUMENTS
LATEST REVISIONS
REVIEW OF STANDARDS
OUTCOME STATEMENT
FOREWORD
1 GENERAL
1.1 Scope
1.2 Interpretation
1.3 Purpose of this Standard
1.4 Specific design
2 DEFINITIONS AND ABBREVIATIONS
2.1 Definitions
2.2 Abbreviations
3 SEQUENCE OF MEASUREMENTS AND TESTS
4 TESTING, MARKING, AND REPORTING
5 PERFORMANCE CRITERIA
6 SERVICEABILITY DEFLECTION
7 OPERATING OF OPENING SASHES
8 AIR INFILTRATION
9 WATER PENETRATION
10 ULTIMATE STRENGTH
1 1 TORSIONAL STRENGTH OF SASHES
Appendix
APPENDIX A – SASH TORSIONAL TEST
APPENDIX B – SPRAY NOZZLE LAYOUT
Table
Table 1 – SLS test pressures for windows not requiring specific design
Table 2 – Maximum operating force for opening sashes and doors
Table 3 – Air infiltration
Table 4 – Water test pressures for windows not requiring specific design
Table 5 – ULS test pressures for windows not requiring specific design
Table 6 – Extreme wind zones
Figure
Figure 1 – Allowable dimensional increase
Figure 2 – Torsional test rig assembly
Figure B1 – Spray nozzle layout for water application
- B1
- E2
Amendments
Previous versions
NZS 4211:2008
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.