ISO/TS 23764:2021
Methodology for achieving non-residential zero-energy buildings (ZEBs)
This document provides a basic step-by-step approach for achieving non-residential (net) zero-energy buildings (ZEBs). It also describes the basic concept of ZEBs and the items for consideration in this approach.
The following are within the scope of this document:
— application to non-residential buildings;
— annual energy consumption of a ZEB (this includes the operating consumption of the building and excludes the energy consumed by the manufacturing of materials and equipment, and the energy consumed during construction);
— renewable energy supply (this can be on-site or off-site, depending on the policy and conditions of the country in which the supply is installed);
— application to any climate zone.
The following are out of the scope of this document:
— recommendations or suggestions for the adoption of any specific technologies and/or equipment and materials that are expected to be continuously innovated (however it does stipulate the technologies for selection);
— specific methods or calculation formulae;
— commissioning methods.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$343.00 NZD
|
|
| HardCopy |
$389.00 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Stepwise approach toward ZEB
4.1 General
4.2 Planning phase
4.2.1 Determining the ZEB stage target: ZEB-ready, nearly ZEB, or (net) ZEB
4.2.2 Reference primary energy consumption and reduction rate targets
4.3 Design phase
4.3.1 General
4.3.2 Setting the outcome
4.3.3 Passive design
4.3.4 Active design
4.3.5 Selection of building materials, equipment and systems
4.3.6 Forecast of primary energy consumption and energy supply for attaining the targets
4.4 Construction phase
4.4.1 General
4.4.2 Construction plan
4.4.3 Construction and inspection
4.4.4 Final check and verification (as built)
4.5 Operations and management
4.5.1 Fine tuning
4.5.2 Understanding the primary energy consumption
4.5.3 Comparison between planned primary energy consumption and actual measurements
4.5.4 Optimizing the energy consumption
4.5.5 Measurement and feedback
5 Examples of evaluations on ZEB
Annex A (informative) Example of (net) ZEB evaluation
Annex B (informative) Example of a nearly ZEB evaluation
Annex C (informative) Example of ZEB-ready evaluation
Bibliography
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 1428.4.1:2009
Design for access and mobility - Part 4.1: Means to assist the orientation of people with vision impairment - Tactile ground surface indicators -
AS/NZS 1428.4.1:2009 A1
Design for access and mobility - Means to assist the orientation of people with vision impairment - Tactile ground surface indicators: Amendment 1
-
AS/NZS 1428.4.1:2009 A2
Design for access and mobility - Part 4.1: Means to assist the orientation of people with vision impairment - Tactile ground surface indicators: Amendment 2:2014 -
BS 40101:2022
Building performance evaluation of occupied and operational buildings (using data gathered from tests, measurements, observation and user experience). Specification
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Stepwise approach toward ZEB
4.1 General
4.2 Planning phase
4.2.1 Determining the ZEB stage target: ZEB-ready, nearly ZEB, or (net) ZEB
4.2.2 Reference primary energy consumption and reduction rate targets
4.3 Design phase
4.3.1 General
4.3.2 Setting the outcome
4.3.3 Passive design
4.3.4 Active design
4.3.5 Selection of building materials, equipment and systems
4.3.6 Forecast of primary energy consumption and energy supply for attaining the targets
4.4 Construction phase
4.4.1 General
4.4.2 Construction plan
4.4.3 Construction and inspection
4.4.4 Final check and verification (as built)
4.5 Operations and management
4.5.1 Fine tuning
4.5.2 Understanding the primary energy consumption
4.5.3 Comparison between planned primary energy consumption and actual measurements
4.5.4 Optimizing the energy consumption
4.5.5 Measurement and feedback
5 Examples of evaluations on ZEB
Annex A (informative) Example of (net) ZEB evaluation
Annex B (informative) Example of a nearly ZEB evaluation
Annex C (informative) Example of ZEB-ready evaluation
Bibliography