ISO/IEC 10373-1:2020
Cards and security devices for personal identification — Test methods — Part 1: General characteristics
This document describes the test methods for characteristics of identification cards according to ISO/IEC 7810 and other standards, such as those listed in the Introduction.
NOTE 1 Criteria for acceptability do not form part of this document but are found in other International Standards including those mentioned in the introduction.
NOTE 2 Test methods described in this document are intended to be performed separately. A given card is not required to pass through all the tests sequentially.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$386.00 NZD
|
|
| HardCopy |
$430.00 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms
4 Default items applicable to the test methods
4.1 Test environment
4.2 Pre-conditioning
4.3 Selection of test methods
4.4 Default tolerance
4.5 Total measurement uncertainty
5 Test methods
5.1 Card warpage
5.1.1 General
5.1.2 Apparatus
5.1.3 Procedure
5.1.4 Test report
5.2 Dimensions of cards
5.2.1 General
5.2.2 Thickness of card measurements
5.2.3 Height and width of card measurement
5.3 Peel strength
5.3.1 General
5.3.2 Apparatus
5.3.3 Procedure
5.3.4 Test report
5.4 Peel strength including the edge of the card
5.4.1 General
5.4.2 Apparatus
5.4.3 Procedure
5.4.4 Test report
5.5 Resistance to chemicals
5.5.1 General
5.5.2 Reagents
5.5.3 Procedure
5.5.4 Test report
5.6 Card dimensional stability and warpage with temperature and humidity
5.6.1 General
5.6.2 Procedure
5.6.3 Test report
5.7 Adhesion or blocking
5.7.1 General
5.7.2 Procedure
5.7.3 Test report
5.8 Bending stiffness
5.8.1 General
5.8.2 Procedure
5.8.3 Test report
5.9 Dynamic bending stress
5.9.1 General
5.9.2 Apparatus
5.9.3 Calibration method
5.9.4 Procedure
5.9.5 Test report
5.10 Dynamic torsional stress
5.10.1 General
5.10.2 Apparatus
5.10.3 Procedure
5.10.4 Test report
5.11 Opacity
5.11.1 General
5.11.2 Apparatus
5.11.3 Procedure
5.12 X-rays
5.12.1 General
5.12.2 Procedure
5.12.3 Test report
5.13 Embossing relief height of characters
5.13.1 General
5.13.2 Apparatus
5.13.3 Procedure
5.13.4 Test report
5.14 Resistance to heat
5.14.1 General
5.14.2 Apparatus
5.14.3 Procedure
5.14.4 Test report
5.15 Surface distortions, raised areas and depressed areas
6 Test methods for ICCs
6.1 Conventions for electrical measurements on ICCs with contacts
6.2 Apparatus for measurements on ICCs with contacts
6.2.1 Default ICC holder, reference axes and default measurement position
6.2.2 Default ICC holder and reference axes
6.2.3 Flattening plate
6.2.4 Default Measurement Position
6.3 Dimension and location of contacts for ICCs with contacts
6.3.1 General
6.3.2 Apparatus
6.3.3 Procedure
6.3.4 Test report
6.4 Mechanical strength of contacts
6.4.1 General
6.4.2 Apparatus
6.4.3 Procedure
6.4.4 Test report
6.5 ESD — Electrostatic discharge for ICC contact cards
6.5.1 General
6.5.2 Test report
6.6 ESS — Electrostatic stress for PICC and VICC
6.6.1 General
6.6.2 Apparatus
6.6.3 Test procedure
6.6.4 Test report
6.7 Electrical resistance of contacts of ICCs with contacts
6.7.1 General
6.7.2 Apparatus
6.7.3 Procedure
6.7.4 Test report
6.8 Additional test methods regarding electrostatic effects
6.9 Surface profile of contacts of ICCs with contacts
6.9.1 General
6.9.2 Apparatus
6.9.3 Procedure
6.9.4 Test report
6.10 ICC — Mechanical strength: 3 wheel test for ICCs with contacts
6.10.1 General
6.10.2 Apparatus
6.10.3 Procedure
6.10.4 Test report
Annex A (informative) Electrostatic discharge conductivity of cards
Annex B (informative) ESD sensitivity of cards to CDM
Bibliography
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
BS 7227:1990
Procedures for the application of ISO 7812 to allocate UK Issuer Identification Numbers (UK IINs) for use on identification cards
-
BS EN 1038:1996
Identification card systems. Telecommunications applications. Integrated circuit(s) card payphone
-
BS EN 1332-1:2009
Identification card systems. Human-machine interface, Design principles for the user interface
-
BS EN 1332-2:1998
Identification card systems. Man-machine interface, Dimensions and location of a tactile identifier for ID-1 cards
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms
4 Default items applicable to the test methods
4.1 Test environment
4.2 Pre-conditioning
4.3 Selection of test methods
4.4 Default tolerance
4.5 Total measurement uncertainty
5 Test methods
5.1 Card warpage
5.1.1 General
5.1.2 Apparatus
5.1.3 Procedure
5.1.4 Test report
5.2 Dimensions of cards
5.2.1 General
5.2.2 Thickness of card measurements
5.2.3 Height and width of card measurement
5.3 Peel strength
5.3.1 General
5.3.2 Apparatus
5.3.3 Procedure
5.3.4 Test report
5.4 Peel strength including the edge of the card
5.4.1 General
5.4.2 Apparatus
5.4.3 Procedure
5.4.4 Test report
5.5 Resistance to chemicals
5.5.1 General
5.5.2 Reagents
5.5.3 Procedure
5.5.4 Test report
5.6 Card dimensional stability and warpage with temperature and humidity
5.6.1 General
5.6.2 Procedure
5.6.3 Test report
5.7 Adhesion or blocking
5.7.1 General
5.7.2 Procedure
5.7.3 Test report
5.8 Bending stiffness
5.8.1 General
5.8.2 Procedure
5.8.3 Test report
5.9 Dynamic bending stress
5.9.1 General
5.9.2 Apparatus
5.9.3 Calibration method
5.9.4 Procedure
5.9.5 Test report
5.10 Dynamic torsional stress
5.10.1 General
5.10.2 Apparatus
5.10.3 Procedure
5.10.4 Test report
5.11 Opacity
5.11.1 General
5.11.2 Apparatus
5.11.3 Procedure
5.12 X-rays
5.12.1 General
5.12.2 Procedure
5.12.3 Test report
5.13 Embossing relief height of characters
5.13.1 General
5.13.2 Apparatus
5.13.3 Procedure
5.13.4 Test report
5.14 Resistance to heat
5.14.1 General
5.14.2 Apparatus
5.14.3 Procedure
5.14.4 Test report
5.15 Surface distortions, raised areas and depressed areas
6 Test methods for ICCs
6.1 Conventions for electrical measurements on ICCs with contacts
6.2 Apparatus for measurements on ICCs with contacts
6.2.1 Default ICC holder, reference axes and default measurement position
6.2.2 Default ICC holder and reference axes
6.2.3 Flattening plate
6.2.4 Default Measurement Position
6.3 Dimension and location of contacts for ICCs with contacts
6.3.1 General
6.3.2 Apparatus
6.3.3 Procedure
6.3.4 Test report
6.4 Mechanical strength of contacts
6.4.1 General
6.4.2 Apparatus
6.4.3 Procedure
6.4.4 Test report
6.5 ESD — Electrostatic discharge for ICC contact cards
6.5.1 General
6.5.2 Test report
6.6 ESS — Electrostatic stress for PICC and VICC
6.6.1 General
6.6.2 Apparatus
6.6.3 Test procedure
6.6.4 Test report
6.7 Electrical resistance of contacts of ICCs with contacts
6.7.1 General
6.7.2 Apparatus
6.7.3 Procedure
6.7.4 Test report
6.8 Additional test methods regarding electrostatic effects
6.9 Surface profile of contacts of ICCs with contacts
6.9.1 General
6.9.2 Apparatus
6.9.3 Procedure
6.9.4 Test report
6.10 ICC — Mechanical strength: 3 wheel test for ICCs with contacts
6.10.1 General
6.10.2 Apparatus
6.10.3 Procedure
6.10.4 Test report
Annex A (informative) Electrostatic discharge conductivity of cards
Annex B (informative) ESD sensitivity of cards to CDM
Bibliography