ISO 6182-1:2014
Fire protection — Automatic sprinkler systems — Part 1: Requirements and test methods for sprinklers
ISO 6182-1:2014 specifies performance and marking requirements and test methods for conventional, spray, flat spray, and sidewall sprinklers. It is not applicable to sprinklers having multiple orifices.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$118.26 NZD
|
|
| HardCopy |
$152.17 NZD
|
|
| Networkable PDF |
Price varies
|
Section sec_1
Section sec_2
Section sec_3
Section sec_3.1
Section sec_3.1.1
Section sec_3.1.2
Section sec_3.1.3
Section sec_3.1.4
Section sec_3.1.5
Section sec_3.1.6
Section sec_3.1.7
Section sec_3.1.8
Section sec_3.2
Section sec_3.2.1
Section sec_3.2.2
Section sec_3.3
Section sec_3.3.1
Section sec_3.3.2
Section sec_3.3.3
Section sec_3.3.4
Section sec_3.4
Section sec_3.4.1
Section sec_3.4.2
Section sec_3.4.3
Section sec_3.5
Section sec_3.5.1
Section sec_3.5.2
Table tab_b
Figure fig_1
Section sec_3.5.3
Section sec_3.5.4
Section sec_3.5.5
Section sec_3.5.6
Section sec_3.5.7
Section sec_3.6
Section sec_3.6.1
Section sec_3.6.2
Section sec_3.6.3
Section sec_4
Section sec_4.1
Section sec_4.2
Section sec_4.3
Section sec_5
Section sec_5.1
Section sec_5.2
Section sec_5.3
Section sec_5.4
Section sec_6
Section sec_6.1
Section sec_6.1.1
Section sec_6.1.1.1
Section sec_6.1.1.2
Section sec_6.1.2
Section sec_6.2
Table tab_1
Section sec_6.3
Section sec_6.4
Section sec_6.4.1
Section sec_6.4.2
Section sec_6.4.2.1
Section sec_6.4.2.2
Section sec_6.4.2.3
Table tab_2
Section sec_6.5
Section sec_6.5.1
Section sec_6.5.2
Section sec_6.6
Section sec_6.6.1
Section sec_6.6.1.1
Section sec_6.6.1.2
Section sec_6.6.2
Section sec_6.7
Section sec_6.7.1
Table tab_e
Figure fig_2
Section sec_6.7.2
Section sec_6.8
Section sec_6.8.1
Section sec_6.8.2
Section sec_6.9
Section sec_6.9.1
Section sec_6.9.2
Section sec_6.9.3
Section sec_6.10
Section sec_6.11
Section sec_6.11.1
Section sec_6.11.2
Section sec_6.11.3
Section sec_6.11.4
Section sec_6.11.5
Section sec_6.11.6
Section sec_6.12
Section sec_6.12.1
Section sec_6.12.2
Section sec_6.13
Section sec_6.14
Section sec_6.14.1
Section sec_6.14.2
Section sec_6.15
Section sec_6.16
Section sec_6.17
Section sec_6.17.1
Section sec_6.17.2
Section sec_6.18
Section sec_6.19
Section sec_6.19.1
Section sec_6.19.2
Section sec_6.19.3
Section sec_6.19.4
Section sec_6.19.5
Section sec_6.20
Section sec_6.21
Section sec_6.22
Section sec_6.23
Table tab_f
Figure fig_3
Section sec_6.24
Section sec_6.25
Section sec_6.25.1
Section sec_6.25.2
Section sec_6.25.3
Section sec_6.25.4
Table tab_3
Table tab_4
Section sec_6.25.5
Section sec_6.26
Section sec_6.27
Section sec_6.28
Section sec_6.29
Section sec_6.29.1
Section sec_6.29.2
Section sec_6.29.3
Section sec_6.29.4
Section sec_6.30
Section sec_6.31
Section sec_7
Section sec_7.1
Section sec_7.2
Section sec_7.3
Section sec_7.4
Section sec_7.4.1
Table tab_g
Figure fig_4
Section sec_7.4.2
Section sec_7.5
Table tab_h
Figure fig_5
Section sec_7.6
Section sec_7.6.1
Table tab_i
Figure fig_6
Table tab_j
Figure fig_7
Table tab_k
Figure fig_8
Table tab_l
Figure fig_9
Table tab_5
Section sec_7.6.2
Table tab_m
Figure fig_10
Table tab_n
Figure fig_11
Section sec_7.6.3
Table tab_6
Table tab_o
Figure fig_12
Table tab_p
Figure fig_13
Section sec_7.7
Section sec_7.7.1
Section sec_7.7.1.1
Table tab_q
Figure fig_14
Table tab_r
Figure fig_15
Table tab_s
Figure fig_16
Table tab_7
Section sec_7.7.1.2
Section sec_7.7.1.3
Section sec_7.7.2
Section sec_7.8
Section sec_7.8.1
Section sec_7.8.1.1
Section sec_7.8.1.1.1
Section sec_7.8.1.2
Section sec_7.8.1.3
Section sec_7.8.1.3.1
Section sec_7.8.1.3.2
Section sec_7.8.1.3.3
Section sec_7.8.2
Section sec_7.8.3
Section sec_7.8.3.1
Section sec_7.8.3.2
Section sec_7.8.3.3
Section sec_7.8.3.4
Section sec_7.8.3.5
Section sec_7.8.3.6
Section sec_7.9
Section sec_7.9.1
Section sec_7.9.1.1
Section sec_7.9.1.2
Section sec_7.9.1.3
Section sec_7.9.2
Section sec_7.9.2.1
Section sec_7.9.2.2
Section sec_7.9.2.3
Section sec_7.10
Section sec_7.10.1
Section sec_7.10.2
Section sec_7.11
Section sec_7.11.1
Section sec_7.11.2
Section sec_7.11.3
Table tab_8
Section sec_7.12
Section sec_7.12.1
Section sec_7.12.2
Section sec_7.13
Section sec_7.13.1
Section sec_7.13.2
Section sec_7.13.3
Section sec_7.13.4
Section sec_7.13.4.1
Section sec_7.13.4.2
Section sec_7.13.5
Section sec_7.13.6
Section sec_7.13.6.1
Section sec_7.13.6.2
Section sec_7.14
Section sec_7.14.1
Section sec_7.14.2
Section sec_7.15
Section sec_7.15.1
Section sec_7.15.2
Section sec_7.16
Section sec_7.16.1
Table tab_9
Section sec_7.16.2
Section sec_7.17
Section sec_7.18
Section sec_7.18.1
Section sec_7.18.2
Section sec_7.18.3
Section sec_7.19
Section sec_7.19.1
Section sec_7.19.2
Table tab_v
Figure fig_17
Section sec_7.20
Section sec_7.21
Section sec_7.21.1
Section sec_7.21.1.1
Figure fig_18
Section sec_7.21.1.2
Section sec_7.21.1.3
Section sec_7.21.2
Section sec_7.21.2.1
Table tab_w
Figure fig_19
Section sec_7.21.2.2
Section sec_7.21.2.3
Section sec_7.21.2.4
Section sec_7.21.3
Section sec_7.21.4
Section sec_7.21.4.1
Section sec_7.21.4.2
Section sec_7.21.4.3
Section sec_7.21.4.4
Section sec_7.22
Section sec_7.22.1
Section sec_7.22.2
Section sec_7.22.2.1
Section sec_7.22.2.2
Section sec_7.22.3
Section sec_7.22.4
Section sec_7.22.5
Section sec_7.23
Section sec_7.23.1
Section sec_7.23.2
Section sec_7.24
Section sec_7.25
Section sec_7.26
Section sec_7.26.1
Section sec_7.26.2
Section sec_7.27
Section sec_7.27.1
Section sec_7.27.2
Table tab_x
Figure fig_20
Table tab_y
Figure fig_21
Section sec_7.27.3
Section sec_7.27.4
Section sec_7.27.5
Section sec_7.27.6
Section sec_7.27.7
Table tab_z
Figure fig_22
Table tab_aa
Figure fig_23
Section sec_7.28
Section sec_7.29
Section sec_7.29.1
Section sec_7.29.2
Section sec_7.29.3
Section sec_7.30
Section sec_7.30.1
Section sec_7.30.2
Table tab_ab
Figure fig_24
Section sec_7.31
Section sec_7.31.1
Section sec_7.31.2
Table tab_ac
Figure fig_25
Section sec_7.32
Section sec_7.32.1
Section sec_7.32.2
Section sec_7.32.3
Section sec_7.33
Section sec_7.33.1
Section sec_7.33.2
Section sec_7.33.3
Section sec_7.33.4
Section sec_7.33.5
Section sec_8
Section sec_8.1
Section sec_8.1.1
Section sec_8.1.2
Section sec_8.1.2.1
Section sec_8.1.2.2
Section sec_8.1.3
Section sec_8.1.4
Section sec_8.1.5
Section sec_8.1.6
Section sec_8.2
Section sec_8.2.1
Section sec_8.2.2
Section sec_8.3
Section sec_9
Section sec_9.1
Section sec_9.2
Section sec_9.3
Annex sec_A
Annex sec_A.1
Annex sec_A.2
Annex sec_A.3
Annex sec_B
Annex sec_B.1
Annex sec_B.2
Annex sec_B.3
Annex sec_B.4
Annex sec_B.5
Annex sec_B.6
Table tab_B.1
Table tab_B.2
Annex sec_C
Annex sec_C.1
Table tab_C.1
Annex sec_D
Annex sec_D.1
Annex sec_D.2
Annex sec_D.3
Annex sec_D.4
Table tab_D.1
Table tab_D.2
Reference ref_1
Reference ref_2
Reference ref_3
Foreword
1 Scope
2 Normative references
3 Terms and definitions
3.1 General
3.2 Types of sprinkler according to type of heat-responsive element
3.3 Types of sprinkler according to type of water distribution
3.4 Types of sprinkler according to position
3.5 Special types of sprinkler
3.6 Types of sprinkler according to sprinkler sensitivity
4 Product consistency
4.1 Quality control program
4.2 Leak resistance testing
4.3 Glass bulb integrity test
5 Product assembly
5.1 General
5.2 Dynamic O-ring seals
5.3 Rated pressure
5.4 Dry sprinklers
6 Requirements
6.1 Dimensions
6.2 Temperature ratings and colour coding
6.3 Operating temperature (see 7.4)
6.4 Water flow and distribution
6.5 Function (see 7.7)
6.6 Service load and strength of sprinkler body (see 7.8)
6.7 Strength of heat-responsive element (see 7.9)
6.8 Leak resistance and hydrostatic strength (see 7.10)
6.9 Heat exposure (see 7.11)
6.10 Thermal shock for glass bulb sprinklers (see 7.12)
6.11 Corrosion (see 7.13)
6.12 Coated sprinklers (see 7.14)
6.13 Water hammer (see 7.15)
6.14 Dynamic heating (see 7.16)
6.15 Resistance to heat (see 7.17)
6.16 Vibration (see 7.18)
6.17 Impact (see 7.19)
6.18 Rough usage (see 7.20)
6.19 Crib fire performance (see 7.21)
6.20 Lateral discharge (see 7.22)
6.21 Thirty-day leakage resistance (see 7.23)
6.22 Vacuum resistance (see 7.24)
6.23 Water shield angle of protection (see 7.25)
6.24 Water shield rotation (see 7.26)
6.25 Thermal response of concealed and recessed sprinklers (see 7.27)
6.26 Freezing test (see 7.28)
6.27 Dry-type sprinkler deposit loading (see 7.29)
6.28 Dry sprinkler air tightness (see 7.30)
6.29 Protective covers (see 7.31)
6.30 Dezincification of brass parts (see 7.32)
6.31 Stress corrosion — magnesium chloride (see 7.33)
7 Test methods
7.1 General
7.2 Preliminary examination
7.3 Visual examination
7.4 Operating temperature test (see 6.3)
7.5 Water flow constant (see 6.4.1)
7.6 Water distribution tests (see 6.4.2)
7.7 Functional test (see 6.5)
7.8 Service load and strength of sprinkler body test (see 6.6)
7.9 Strength of heat-responsive element test (see 6.7)
7.10 Leak resistance and hydrostatic strength tests (see 6.8)
7.11 Heat exposure test (see 6.9)
7.12 Thermal shock test for glass bulb sprinklers (see 6.10)
7.13 Corrosion tests (see 6.11)
7.14 Tests for sprinkler coatings
7.15 Water hammer test (see 6.13)
7.16 Dynamic heating test (see 6.14)
7.17 Heat resistance test (see 6.15)
7.18 Vibration test (see 6.16)
7.19 Impact test (see 6.17)
7.20 Rough usage test (see 6.18)
7.21 Crib fire test (see 6.19)
7.22 Lateral discharge test (see 6.20)
7.23 Thirty-day leakage test (see 6.21)
7.24 Vacuum test (see 6.22)
7.25 Water shield angle of protection (see 6.23)
7.26 Water shield rotation test (see 6.24)
7.27 Thermal response of concealed and recessed sprinklers test (see 6.25)
7.28 Freezing test (see 6.26)
7.29 Dry-type sprinkler deposit loading test (see 6.27)
7.30 Dry sprinkler air tightness test (see 6.28)
7.31 Protective cover impact test for glass bulb sprinklers (see 6.29)
7.32 Dezincification of brass parts test (see 6.30)
7.33 Stress corrosion — magnesium chloride test (see 6.31)
8 Marking
8.1 Sprinklers
8.2 Sprinkler housings and concealed-sprinkler cover plates
8.3 Protective covers
9 Manufacturer’s installation instructions
Annex A (informative) Analysis of the strength test for release elements
Annex B (informative) Statistical tolerance limits
Annex C (normative) Tolerances
Annex D (normative) Tolerance limit calculation methods for strength distribution
Bibliography
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
AS/NZS 1530.7:1998
Methods for fire tests on building materials, components and structures - Smoke control door and shutter assemblies - Ambient and medium temperature leakage test procedure
-
AS/NZS 1668.1:2015
The use of ventilation and air conditioning in buildings - Part 1: Fire and smoke control in buildings -
AS/NZS 5110:2011
Recessed luminaire barriers -
AS/NZS 5110:2011A1
Recessed luminaire barriers: Amendment 1:2013
Section sec_1
Section sec_2
Section sec_3
Section sec_3.1
Section sec_3.1.1
Section sec_3.1.2
Section sec_3.1.3
Section sec_3.1.4
Section sec_3.1.5
Section sec_3.1.6
Section sec_3.1.7
Section sec_3.1.8
Section sec_3.2
Section sec_3.2.1
Section sec_3.2.2
Section sec_3.3
Section sec_3.3.1
Section sec_3.3.2
Section sec_3.3.3
Section sec_3.3.4
Section sec_3.4
Section sec_3.4.1
Section sec_3.4.2
Section sec_3.4.3
Section sec_3.5
Section sec_3.5.1
Section sec_3.5.2
Table tab_b
Figure fig_1
Section sec_3.5.3
Section sec_3.5.4
Section sec_3.5.5
Section sec_3.5.6
Section sec_3.5.7
Section sec_3.6
Section sec_3.6.1
Section sec_3.6.2
Section sec_3.6.3
Section sec_4
Section sec_4.1
Section sec_4.2
Section sec_4.3
Section sec_5
Section sec_5.1
Section sec_5.2
Section sec_5.3
Section sec_5.4
Section sec_6
Section sec_6.1
Section sec_6.1.1
Section sec_6.1.1.1
Section sec_6.1.1.2
Section sec_6.1.2
Section sec_6.2
Table tab_1
Section sec_6.3
Section sec_6.4
Section sec_6.4.1
Section sec_6.4.2
Section sec_6.4.2.1
Section sec_6.4.2.2
Section sec_6.4.2.3
Table tab_2
Section sec_6.5
Section sec_6.5.1
Section sec_6.5.2
Section sec_6.6
Section sec_6.6.1
Section sec_6.6.1.1
Section sec_6.6.1.2
Section sec_6.6.2
Section sec_6.7
Section sec_6.7.1
Table tab_e
Figure fig_2
Section sec_6.7.2
Section sec_6.8
Section sec_6.8.1
Section sec_6.8.2
Section sec_6.9
Section sec_6.9.1
Section sec_6.9.2
Section sec_6.9.3
Section sec_6.10
Section sec_6.11
Section sec_6.11.1
Section sec_6.11.2
Section sec_6.11.3
Section sec_6.11.4
Section sec_6.11.5
Section sec_6.11.6
Section sec_6.12
Section sec_6.12.1
Section sec_6.12.2
Section sec_6.13
Section sec_6.14
Section sec_6.14.1
Section sec_6.14.2
Section sec_6.15
Section sec_6.16
Section sec_6.17
Section sec_6.17.1
Section sec_6.17.2
Section sec_6.18
Section sec_6.19
Section sec_6.19.1
Section sec_6.19.2
Section sec_6.19.3
Section sec_6.19.4
Section sec_6.19.5
Section sec_6.20
Section sec_6.21
Section sec_6.22
Section sec_6.23
Table tab_f
Figure fig_3
Section sec_6.24
Section sec_6.25
Section sec_6.25.1
Section sec_6.25.2
Section sec_6.25.3
Section sec_6.25.4
Table tab_3
Table tab_4
Section sec_6.25.5
Section sec_6.26
Section sec_6.27
Section sec_6.28
Section sec_6.29
Section sec_6.29.1
Section sec_6.29.2
Section sec_6.29.3
Section sec_6.29.4
Section sec_6.30
Section sec_6.31
Section sec_7
Section sec_7.1
Section sec_7.2
Section sec_7.3
Section sec_7.4
Section sec_7.4.1
Table tab_g
Figure fig_4
Section sec_7.4.2
Section sec_7.5
Table tab_h
Figure fig_5
Section sec_7.6
Section sec_7.6.1
Table tab_i
Figure fig_6
Table tab_j
Figure fig_7
Table tab_k
Figure fig_8
Table tab_l
Figure fig_9
Table tab_5
Section sec_7.6.2
Table tab_m
Figure fig_10
Table tab_n
Figure fig_11
Section sec_7.6.3
Table tab_6
Table tab_o
Figure fig_12
Table tab_p
Figure fig_13
Section sec_7.7
Section sec_7.7.1
Section sec_7.7.1.1
Table tab_q
Figure fig_14
Table tab_r
Figure fig_15
Table tab_s
Figure fig_16
Table tab_7
Section sec_7.7.1.2
Section sec_7.7.1.3
Section sec_7.7.2
Section sec_7.8
Section sec_7.8.1
Section sec_7.8.1.1
Section sec_7.8.1.1.1
Section sec_7.8.1.2
Section sec_7.8.1.3
Section sec_7.8.1.3.1
Section sec_7.8.1.3.2
Section sec_7.8.1.3.3
Section sec_7.8.2
Section sec_7.8.3
Section sec_7.8.3.1
Section sec_7.8.3.2
Section sec_7.8.3.3
Section sec_7.8.3.4
Section sec_7.8.3.5
Section sec_7.8.3.6
Section sec_7.9
Section sec_7.9.1
Section sec_7.9.1.1
Section sec_7.9.1.2
Section sec_7.9.1.3
Section sec_7.9.2
Section sec_7.9.2.1
Section sec_7.9.2.2
Section sec_7.9.2.3
Section sec_7.10
Section sec_7.10.1
Section sec_7.10.2
Section sec_7.11
Section sec_7.11.1
Section sec_7.11.2
Section sec_7.11.3
Table tab_8
Section sec_7.12
Section sec_7.12.1
Section sec_7.12.2
Section sec_7.13
Section sec_7.13.1
Section sec_7.13.2
Section sec_7.13.3
Section sec_7.13.4
Section sec_7.13.4.1
Section sec_7.13.4.2
Section sec_7.13.5
Section sec_7.13.6
Section sec_7.13.6.1
Section sec_7.13.6.2
Section sec_7.14
Section sec_7.14.1
Section sec_7.14.2
Section sec_7.15
Section sec_7.15.1
Section sec_7.15.2
Section sec_7.16
Section sec_7.16.1
Table tab_9
Section sec_7.16.2
Section sec_7.17
Section sec_7.18
Section sec_7.18.1
Section sec_7.18.2
Section sec_7.18.3
Section sec_7.19
Section sec_7.19.1
Section sec_7.19.2
Table tab_v
Figure fig_17
Section sec_7.20
Section sec_7.21
Section sec_7.21.1
Section sec_7.21.1.1
Figure fig_18
Section sec_7.21.1.2
Section sec_7.21.1.3
Section sec_7.21.2
Section sec_7.21.2.1
Table tab_w
Figure fig_19
Section sec_7.21.2.2
Section sec_7.21.2.3
Section sec_7.21.2.4
Section sec_7.21.3
Section sec_7.21.4
Section sec_7.21.4.1
Section sec_7.21.4.2
Section sec_7.21.4.3
Section sec_7.21.4.4
Section sec_7.22
Section sec_7.22.1
Section sec_7.22.2
Section sec_7.22.2.1
Section sec_7.22.2.2
Section sec_7.22.3
Section sec_7.22.4
Section sec_7.22.5
Section sec_7.23
Section sec_7.23.1
Section sec_7.23.2
Section sec_7.24
Section sec_7.25
Section sec_7.26
Section sec_7.26.1
Section sec_7.26.2
Section sec_7.27
Section sec_7.27.1
Section sec_7.27.2
Table tab_x
Figure fig_20
Table tab_y
Figure fig_21
Section sec_7.27.3
Section sec_7.27.4
Section sec_7.27.5
Section sec_7.27.6
Section sec_7.27.7
Table tab_z
Figure fig_22
Table tab_aa
Figure fig_23
Section sec_7.28
Section sec_7.29
Section sec_7.29.1
Section sec_7.29.2
Section sec_7.29.3
Section sec_7.30
Section sec_7.30.1
Section sec_7.30.2
Table tab_ab
Figure fig_24
Section sec_7.31
Section sec_7.31.1
Section sec_7.31.2
Table tab_ac
Figure fig_25
Section sec_7.32
Section sec_7.32.1
Section sec_7.32.2
Section sec_7.32.3
Section sec_7.33
Section sec_7.33.1
Section sec_7.33.2
Section sec_7.33.3
Section sec_7.33.4
Section sec_7.33.5
Section sec_8
Section sec_8.1
Section sec_8.1.1
Section sec_8.1.2
Section sec_8.1.2.1
Section sec_8.1.2.2
Section sec_8.1.3
Section sec_8.1.4
Section sec_8.1.5
Section sec_8.1.6
Section sec_8.2
Section sec_8.2.1
Section sec_8.2.2
Section sec_8.3
Section sec_9
Section sec_9.1
Section sec_9.2
Section sec_9.3
Annex sec_A
Annex sec_A.1
Annex sec_A.2
Annex sec_A.3
Annex sec_B
Annex sec_B.1
Annex sec_B.2
Annex sec_B.3
Annex sec_B.4
Annex sec_B.5
Annex sec_B.6
Table tab_B.1
Table tab_B.2
Annex sec_C
Annex sec_C.1
Table tab_C.1
Annex sec_D
Annex sec_D.1
Annex sec_D.2
Annex sec_D.3
Annex sec_D.4
Table tab_D.1
Table tab_D.2
Reference ref_1
Reference ref_2
Reference ref_3
Foreword
1 Scope
2 Normative references
3 Terms and definitions
3.1 General
3.2 Types of sprinkler according to type of heat-responsive element
3.3 Types of sprinkler according to type of water distribution
3.4 Types of sprinkler according to position
3.5 Special types of sprinkler
3.6 Types of sprinkler according to sprinkler sensitivity
4 Product consistency
4.1 Quality control program
4.2 Leak resistance testing
4.3 Glass bulb integrity test
5 Product assembly
5.1 General
5.2 Dynamic O-ring seals
5.3 Rated pressure
5.4 Dry sprinklers
6 Requirements
6.1 Dimensions
6.2 Temperature ratings and colour coding
6.3 Operating temperature (see 7.4)
6.4 Water flow and distribution
6.5 Function (see 7.7)
6.6 Service load and strength of sprinkler body (see 7.8)
6.7 Strength of heat-responsive element (see 7.9)
6.8 Leak resistance and hydrostatic strength (see 7.10)
6.9 Heat exposure (see 7.11)
6.10 Thermal shock for glass bulb sprinklers (see 7.12)
6.11 Corrosion (see 7.13)
6.12 Coated sprinklers (see 7.14)
6.13 Water hammer (see 7.15)
6.14 Dynamic heating (see 7.16)
6.15 Resistance to heat (see 7.17)
6.16 Vibration (see 7.18)
6.17 Impact (see 7.19)
6.18 Rough usage (see 7.20)
6.19 Crib fire performance (see 7.21)
6.20 Lateral discharge (see 7.22)
6.21 Thirty-day leakage resistance (see 7.23)
6.22 Vacuum resistance (see 7.24)
6.23 Water shield angle of protection (see 7.25)
6.24 Water shield rotation (see 7.26)
6.25 Thermal response of concealed and recessed sprinklers (see 7.27)
6.26 Freezing test (see 7.28)
6.27 Dry-type sprinkler deposit loading (see 7.29)
6.28 Dry sprinkler air tightness (see 7.30)
6.29 Protective covers (see 7.31)
6.30 Dezincification of brass parts (see 7.32)
6.31 Stress corrosion — magnesium chloride (see 7.33)
7 Test methods
7.1 General
7.2 Preliminary examination
7.3 Visual examination
7.4 Operating temperature test (see 6.3)
7.5 Water flow constant (see 6.4.1)
7.6 Water distribution tests (see 6.4.2)
7.7 Functional test (see 6.5)
7.8 Service load and strength of sprinkler body test (see 6.6)
7.9 Strength of heat-responsive element test (see 6.7)
7.10 Leak resistance and hydrostatic strength tests (see 6.8)
7.11 Heat exposure test (see 6.9)
7.12 Thermal shock test for glass bulb sprinklers (see 6.10)
7.13 Corrosion tests (see 6.11)
7.14 Tests for sprinkler coatings
7.15 Water hammer test (see 6.13)
7.16 Dynamic heating test (see 6.14)
7.17 Heat resistance test (see 6.15)
7.18 Vibration test (see 6.16)
7.19 Impact test (see 6.17)
7.20 Rough usage test (see 6.18)
7.21 Crib fire test (see 6.19)
7.22 Lateral discharge test (see 6.20)
7.23 Thirty-day leakage test (see 6.21)
7.24 Vacuum test (see 6.22)
7.25 Water shield angle of protection (see 6.23)
7.26 Water shield rotation test (see 6.24)
7.27 Thermal response of concealed and recessed sprinklers test (see 6.25)
7.28 Freezing test (see 6.26)
7.29 Dry-type sprinkler deposit loading test (see 6.27)
7.30 Dry sprinkler air tightness test (see 6.28)
7.31 Protective cover impact test for glass bulb sprinklers (see 6.29)
7.32 Dezincification of brass parts test (see 6.30)
7.33 Stress corrosion — magnesium chloride test (see 6.31)
8 Marking
8.1 Sprinklers
8.2 Sprinkler housings and concealed-sprinkler cover plates
8.3 Protective covers
9 Manufacturer’s installation instructions
Annex A (informative) Analysis of the strength test for release elements
Annex B (informative) Statistical tolerance limits
Annex C (normative) Tolerances
Annex D (normative) Tolerance limit calculation methods for strength distribution
Bibliography