ISO 5006:2017
Earth-moving machinery — Operator's field of view — Test method and performance criteria
ISO 5006:2017 specifies a static test method for determining and evaluating the operator's field of view on a rectangular boundary around the machine and on a 12 m visibility test circle (VTC).
It is applicable to the earth-moving machines as defined in ISO 6165 that have a seated operator, and which are intended to operate on work sites and travel on public roads. It provides visibility performance criteria for machines up to the maximum operating mass according to ISO 6016, depending on the type of machine family listed in Table 1. For those machines not listed ? including larger machines, derivative and other types of earth-moving machinery ? the visibility test procedures can be used along with the risk assessment process defined in 10.4.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$301.00 NZD
|
|
| HardCopy |
$346.00 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Basic dimensions
4.1 Light spacing dimensions
4.2 Masking dimensions
4.3 Reference dimensions for measurement purposes
5 Test apparatus
6 Machine test configuration
7 Performance criteria for indirect visibility
7.1 Visibility aids
7.2 Position of display devices
7.3 Performance criteria for mirrors
7.4 Performance criteria for CCTV system
8 Measurement procedure
8.1 Test-surface marking and machine location on test surface
8.2 Positioning of test apparatus
8.3 Measurement of maskings
8.3.1 General
8.3.2 Measurement at the VTC
8.3.3 Measurement at RB
9 Calculation method
9.1 Calculation procedure for determining maskings at VTC or RB
9.2 Computer-simulation
10 Evaluation method and performance criteria
10.1 Visibility performance criteria on VTC
10.2 Visibility performance criteria for RB
10.3 Visibility maskings that exceed visibility performance criteria with direct view
10.4 Requirements for larger, derivative and other types of earth-moving machinery not covered in Table 1 and Table 2
10.4.1 Larger machines
10.4.2 Derivative and other types of earth-moving machinery
10.4.3 Risk assessment process for larger, derivative or other types of earth-moving machinery not covered in Table 1 and Table 2
10.4.4 Visibility test circle and allowed masking width
11 Test report
11.1 Machine details
11.2 Drawing
12 Visibility information for operator’s manual
Annex A (normative) Dimensions and position of HH and rectangular boundary (RB)
Bibliography
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS ISO 6394:2019
Earth-moving machinery - Determination of emission sound pressure level at operator’s position - Stationary test conditions -
BS 3318:1978
Specification for earth-moving machinery - method for locating the centre of gravity
-
BS 5279:1976
Specification for dimensions of fuel filler openings of earth-moving machinery
-
BS 5528:1981
Specification for operator's controls on excavators used for earth-moving
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Basic dimensions
4.1 Light spacing dimensions
4.2 Masking dimensions
4.3 Reference dimensions for measurement purposes
5 Test apparatus
6 Machine test configuration
7 Performance criteria for indirect visibility
7.1 Visibility aids
7.2 Position of display devices
7.3 Performance criteria for mirrors
7.4 Performance criteria for CCTV system
8 Measurement procedure
8.1 Test-surface marking and machine location on test surface
8.2 Positioning of test apparatus
8.3 Measurement of maskings
8.3.1 General
8.3.2 Measurement at the VTC
8.3.3 Measurement at RB
9 Calculation method
9.1 Calculation procedure for determining maskings at VTC or RB
9.2 Computer-simulation
10 Evaluation method and performance criteria
10.1 Visibility performance criteria on VTC
10.2 Visibility performance criteria for RB
10.3 Visibility maskings that exceed visibility performance criteria with direct view
10.4 Requirements for larger, derivative and other types of earth-moving machinery not covered in Table 1 and Table 2
10.4.1 Larger machines
10.4.2 Derivative and other types of earth-moving machinery
10.4.3 Risk assessment process for larger, derivative or other types of earth-moving machinery not covered in Table 1 and Table 2
10.4.4 Visibility test circle and allowed masking width
11 Test report
11.1 Machine details
11.2 Drawing
12 Visibility information for operator’s manual
Annex A (normative) Dimensions and position of HH and rectangular boundary (RB)
Bibliography