ISO 3008-3:2016
Fire resistance tests — Part 3: Door and shutter assemblies horizontally oriented
ISO 3008-3:2016 specifies the test method for determining the fire resistance of horizontally oriented door and shutter assemblies which may be exposed to a fire from the underside. It is applicable to all types of door and shutter assemblies installed in a horizontal orientation within floor or roof assemblies requiring fire-resistance ratings in buildings.
The test method allows for the measurement of integrity and, if required, the measurement of radiation and thermal insulation. In addition, this test method includes measurement of the load-carrying ability of the test specimens subjected to a standard fire-resistance test.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$190.00 NZD
|
|
| HardCopy |
$238.00 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Test equipment
5 Test conditions
6 Test specimen
6.1 Size of specimen
6.2 Design of specimen
6.3 Verification
7 Installation of test specimen
7.1 General
7.2 Supporting construction
7.3 Test construction
7.3.1 Associated and supporting construction
7.3.2 Associated construction
7.3.3 Supporting construction
7.4 Gaps
8 Conditioning
8.1 Moisture content
8.2 Mechanical
9 Application of instrumentation
9.1 Temperature measurements
9.1.1 Furnace temperature measuring instrument
9.1.2 Unexposed face thermocouples
9.2 Maximum temperature
9.3 Pressure measurements
9.4 Heat flux measurement
9.4.1 General
9.4.2 Apparatus
9.4.3 Procedure
9.4.4 Measurement
9.5 Loading
9.6 Deflection
10 Test procedure
10.1 Gap measurements
10.2 Test Measurements
11 Performance criteria
11.1 Integrity
11.2 Insulation
11.3 Loadbearing capacity
12 Test report
13 Field of direct application of test results
13.1 General
13.2 Timber constructions
13.3 Steel constructions
13.4 Glazed constructions
13.5 Fixings/hardware
Annex A (normative) Conditioning requirements for supporting constructions
Annex B (informative) Estimation of radiant heat flux using measured surface temperature and Stefan-Boltzmann law
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 1530.3:1999
Methods for fire tests on building materials, components and structures - Simultaneous determination of ignitability, flame propagation, heat release and smoke release
-
AS/NZS 1720.4:2019
Timber structures - Part 4: Fire resistance of timber elements -
AS/NZS 1905.1:1997
Components for the protection of openings in fire-resistant walls - Fire-resistant doorsets
-
AS/NZS 3013:2005
Electrical installations - Classification of the fire and mechanical performance of wiring system elements
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Test equipment
5 Test conditions
6 Test specimen
6.1 Size of specimen
6.2 Design of specimen
6.3 Verification
7 Installation of test specimen
7.1 General
7.2 Supporting construction
7.3 Test construction
7.3.1 Associated and supporting construction
7.3.2 Associated construction
7.3.3 Supporting construction
7.4 Gaps
8 Conditioning
8.1 Moisture content
8.2 Mechanical
9 Application of instrumentation
9.1 Temperature measurements
9.1.1 Furnace temperature measuring instrument
9.1.2 Unexposed face thermocouples
9.2 Maximum temperature
9.3 Pressure measurements
9.4 Heat flux measurement
9.4.1 General
9.4.2 Apparatus
9.4.3 Procedure
9.4.4 Measurement
9.5 Loading
9.6 Deflection
10 Test procedure
10.1 Gap measurements
10.2 Test Measurements
11 Performance criteria
11.1 Integrity
11.2 Insulation
11.3 Loadbearing capacity
12 Test report
13 Field of direct application of test results
13.1 General
13.2 Timber constructions
13.3 Steel constructions
13.4 Glazed constructions
13.5 Fixings/hardware
Annex A (normative) Conditioning requirements for supporting constructions
Annex B (informative) Estimation of radiant heat flux using measured surface temperature and Stefan-Boltzmann law