ISO 23717:2022
Steel wire and wire products — Hose reinforcement wire
This document specifies the composition, dimensions and mechanical properties of steel wire with a high mass fraction of carbon, generally brass coated, for reinforcing high-pressure hoses.
It is applicable to multiple parallel wires, braided or spirally wrapped for reinforcement in a rubber or synthetic hose that is made to withstand a relatively high bursting pressure.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$118.26 NZD
|
|
| HardCopy |
$152.17 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Designation and ordering
5.1 Designation
5.2 Information supplied by the purchaser and items to be agreed upon
6 Requirements
6.1 Material
6.1.1 Steel
6.1.2 Chemical composition
6.1.3 Wire
6.1.4 Coating material
6.2 Mechanical properties
6.2.1 Tensile strength, breaking load and elongation
6.2.2 Reverse bend test
6.2.3 Torsion test
6.3 Surface quality
6.3.1 General
6.3.2 Coating mass
6.3.3 Cast and tip rise/dead cast
6.4 Dimensions and tolerances
6.4.1 Tolerance on diameter
6.4.2 Out of roundness
6.5 Delivery conditions
6.5.1 Unit package
6.5.2 Welds
7 Testing and inspection
7.1 Testing and inspection documents
7.2 Scope of test programme for acceptance inspection
7.3 Test procedures
7.3.1 Tensile test
7.3.2 Reverse bend test and torsion test
7.3.3 Diameter and out of roundness
7.3.4 Cast and tip rise/dead cast
7.3.5 Coating test
7.4 Retests
8 Marking, labelling and packaging
Annex A (informative) Packaging of hose reinforcement wire
Bibliography
Previous versions
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
AS/NZS 3863:2002
Galvanized mild steel wire for armouring of cables
-
AS/NZS 4534:2006
Zinc and zinc/aluminium-alloy coatings on steel wire
-
BS 1052:1980
Specification for mild steel wire for general engineering purposes
-
BS 183:1972
Specification for general purpose galvanized steel wire strand
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Designation and ordering
5.1 Designation
5.2 Information supplied by the purchaser and items to be agreed upon
6 Requirements
6.1 Material
6.1.1 Steel
6.1.2 Chemical composition
6.1.3 Wire
6.1.4 Coating material
6.2 Mechanical properties
6.2.1 Tensile strength, breaking load and elongation
6.2.2 Reverse bend test
6.2.3 Torsion test
6.3 Surface quality
6.3.1 General
6.3.2 Coating mass
6.3.3 Cast and tip rise/dead cast
6.4 Dimensions and tolerances
6.4.1 Tolerance on diameter
6.4.2 Out of roundness
6.5 Delivery conditions
6.5.1 Unit package
6.5.2 Welds
7 Testing and inspection
7.1 Testing and inspection documents
7.2 Scope of test programme for acceptance inspection
7.3 Test procedures
7.3.1 Tensile test
7.3.2 Reverse bend test and torsion test
7.3.3 Diameter and out of roundness
7.3.4 Cast and tip rise/dead cast
7.3.5 Coating test
7.4 Retests
8 Marking, labelling and packaging
Annex A (informative) Packaging of hose reinforcement wire
Bibliography