ISO 23218-1:2022
Industrial automation systems and integration — Numerical control systems for machine tools — Part 1: Requirements for numerical control systems
This document specifies general requirements for the design and manufacturing of numerical control systems (NC systems) for machine tools. It consists of technical and inspection requirements and test methods.
This document is applicable to NC systems used in machine tools (including metal cutting machine tools, metal forming machine tools and woodworking machine tools) and to partial assemblies of machine tools (including cabinets and auxiliary devices) intended to be integrated into machine tools. It is also applicable to other production equipment using NC systems.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$240.87 NZD
|
|
| HardCopy |
$277.39 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviated terms
5 Technical requirements
5.1 NC system functional requirements
5.1.1 Coordinate system and motion direction
5.1.2 Programming languages
5.1.3 Control function of the NC system
5.2 Interface signals of NC systems
5.2.1 Analogue interface signal
5.2.2 Digital interface signal
5.2.3 Fieldbus interface
5.3 Environmental requirements of NC systems
5.3.1 General
5.3.2 Temperature, humidity and atmospheric pressure environmental adaptability requirements
5.3.3 Mechanical environment adaptability
5.4 EMC immunity requirements of NC systems
5.4.1 EMC basic requirements for NC systems
5.4.2 Criteria of EMC immunity
5.4.3 EMC basic immunity performance requirements for NC systems
5.5 Protection and safety requirements of NC systems
5.6 Document requirements for NC system
5.6.1 Technical documentation
5.6.2 Guarantee file
5.6.3 Packaging documentation
5.6.4 Nameplate
6 Test method
6.1 Test conditions of NC systems
6.2 Function test of NC systems
6.3 Inspection for basic design requirements of NC systems
6.4 Environmental test of NC systems
6.4.1 Temperature and humidity adaptability test
6.4.2 Mechanical environmental adaptability test
6.4.3 Power environment adaptability test
6.5 EMC immunity test of NC systems
6.5.1 Electrostatic discharge (ESD) immunity test
6.5.2 Electrical fast transient/burst immunity test
6.5.3 Surge immunity test
6.5.4 Voltage dip and short interruption immunity test
6.5.5 Radio-frequency radiated immunity test
6.5.6 Radio-frequency field conduction immunity test
6.5.7 Power frequency magnetic field immunity test
6.6 Packing inspection
6.7 Integrity check for the accompanying product documents
6.8 Sequence of inspection and test
7 Inspection rules
7.1 General
7.2 Classification of inspection
7.3 Type inspection
7.4 Routine inspection
7.5 Special inspection
8 Packaging, storage and transportation
8.1 Packaging
8.2 Storage
8.3 Transportation
Annex A (normative) Product quality determination rules and inspection items
Bibliography
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
BS 3641-2:1980
Symbols for machine tools, Specification for numerical control symbols
-
BS 4656-28:1988
Accuracy of machine tools and methods of test, Specification for numerically controlled turning machines up to and including 1500 mm turning diameter
-
BS 5782:1979
Specification for interface between numerical controls and industrial machines
-
BS EN ISO 17295:2023
Additive manufacturing. General principles. Part positioning, coordinates and orientation
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviated terms
5 Technical requirements
5.1 NC system functional requirements
5.1.1 Coordinate system and motion direction
5.1.2 Programming languages
5.1.3 Control function of the NC system
5.2 Interface signals of NC systems
5.2.1 Analogue interface signal
5.2.2 Digital interface signal
5.2.3 Fieldbus interface
5.3 Environmental requirements of NC systems
5.3.1 General
5.3.2 Temperature, humidity and atmospheric pressure environmental adaptability requirements
5.3.3 Mechanical environment adaptability
5.4 EMC immunity requirements of NC systems
5.4.1 EMC basic requirements for NC systems
5.4.2 Criteria of EMC immunity
5.4.3 EMC basic immunity performance requirements for NC systems
5.5 Protection and safety requirements of NC systems
5.6 Document requirements for NC system
5.6.1 Technical documentation
5.6.2 Guarantee file
5.6.3 Packaging documentation
5.6.4 Nameplate
6 Test method
6.1 Test conditions of NC systems
6.2 Function test of NC systems
6.3 Inspection for basic design requirements of NC systems
6.4 Environmental test of NC systems
6.4.1 Temperature and humidity adaptability test
6.4.2 Mechanical environmental adaptability test
6.4.3 Power environment adaptability test
6.5 EMC immunity test of NC systems
6.5.1 Electrostatic discharge (ESD) immunity test
6.5.2 Electrical fast transient/burst immunity test
6.5.3 Surge immunity test
6.5.4 Voltage dip and short interruption immunity test
6.5.5 Radio-frequency radiated immunity test
6.5.6 Radio-frequency field conduction immunity test
6.5.7 Power frequency magnetic field immunity test
6.6 Packing inspection
6.7 Integrity check for the accompanying product documents
6.8 Sequence of inspection and test
7 Inspection rules
7.1 General
7.2 Classification of inspection
7.3 Type inspection
7.4 Routine inspection
7.5 Special inspection
8 Packaging, storage and transportation
8.1 Packaging
8.2 Storage
8.3 Transportation
Annex A (normative) Product quality determination rules and inspection items
Bibliography