ISO 21308-5:2014
Road vehicles — Product data exchange between chassis and body work manufacturers (BEP) — Part 5: Coding of loader crane bodywork
The ISO 21308 series describes a generic system for the exchange of data between truck chassis manufacturers and bodywork manufacturers. It applies to commercial vehicles as defined in ISO 3833, having a maximum gross vehicle mass above 3 500 kg.
The process of exchanging the above information can involve chassis manufacturers, chassis importers, chassis dealers, one or more bodywork manufacturers, and bodywork component suppliers, e.g. manufacturers of demountable bodies, cranes and loading equipment, and tipping equipment.
ISO 21308-5:2014 specifically describes the coding dimensions and other characteristics of loader cranes and auxiliary stabilizers, to ensure an efficient and unambiguous communication of installation data between the parties involved.
ISO 21308-5:2014 covers loader cranes as specified in ISO 15442, designed to be fitted on commercial vehicles (including trailers).
ISO 21308-5:2014 is not applicable to other load-lifting systems (e.g. tail lifts, hook loader systems).
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$361.74 NZD
|
|
| HardCopy |
$406.09 NZD
|
|
| Networkable PDF |
Price varies
|
Section sec_1
Section sec_2
Section sec_3
Section sec_3.1
Table tab_a
Figure fig_1
Section sec_3.2
Section sec_3.3
Section sec_3.4
Section sec_3.5
Section sec_3.6
Section sec_3.7
Section sec_3.8
Section sec_3.9
Section sec_3.10
Section sec_3.11
Section sec_3.12
Section sec_3.13
Section sec_3.14
Section sec_3.15
Section sec_3.16
Section sec_3.17
Section sec_3.18
Section sec_3.19
Section sec_3.20
Section sec_3.21
Section sec_3.22
Section sec_3.23
Section sec_3.24
Section sec_3.25
Section sec_3.25.1
Section sec_3.25.2
Section sec_3.25.3
Section sec_3.25.4
Section sec_3.26
Section sec_4
Section sec_4.1
Table tab_1
Section sec_4.2
Section sec_4.3
Section sec_4.3.1
Figure fig_2
Section sec_4.3.2
Figure fig_3
Figure fig_4
Section sec_4.3.3
Figure fig_5
Section sec_4.3.4
Figure fig_6
Section sec_4.3.5
Section sec_5
Section sec_5.1
Section sec_5.2
Section sec_5.3
Section sec_5.3.1
Section sec_5.3.1.1
Section sec_5.3.1.2
Section sec_5.3.2
Section sec_5.3.3
Section sec_5.4
Section sec_5.4.1
Section sec_5.4.2
Section sec_5.4.2.1
Section sec_5.4.2.2
Section sec_5.4.2.3
Section sec_5.4.3
Section sec_5.4.4
Section sec_5.5
Section sec_5.5.1
Section sec_5.5.2
Section sec_5.6
Section sec_6
Section sec_6.1
Section sec_6.2
Section sec_7
Section sec_8
Section sec_8.1
Section sec_8.2
Section sec_8.3
Section sec_8.4
Section sec_8.5
Annex sec_A
Annex sec_A.1
Annex sec_A.2
Reference ref_1
Reference ref_2
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Coding principles
4.1 BEP codes of loader cranes
4.2 Units of BEP code values
4.3 References for measurements
5 Coding of geometrical data and space requirements
5.1 Mounting positions of crane and auxiliary stabilizers
5.2 Dimensional interfaces for connections to sub-frame and chassis
5.3 Crane base dimensions, stabilizers, and lower space requirements
5.4 Boom system dimensions and space requirements above mounting plane
5.5 Crane slewing space requirements
5.6 Auxiliary stabilizer dimensions
6 Coding of masses
6.1 Mass points in transport position
6.2 Masses with distances in working mode for stability calculations
7 Coding of forces and moments
8 Coding of general crane data
8.1 General crane data
8.2 Mechanical interfaces
8.3 Hydraulics equipment and interfaces
8.4 Electrical/electronic equipment and interfaces
8.5 Load lifting attachments
Annex A (normative) XML coding related to this part of ISO 21308
Bibliography
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
BS AU 203a:1988
Specification for dimensions of couplings between power take offs (PTOs) and ancillary driven units on commercial road vehicles
-
BS AU 209-8:1997
Vehicle security, Specification for locking systems for goods vehicle load compartments
-
BS AU 214-2:1988
Gearbox flanges, Specification for dimensions for type A gearbox flanges for commercial vehicles and buses
-
BS AU 214-3:1988
Gearbox flanges, Specification for dimensions for type S gearbox flanges for commercial vehicles and buses
Section sec_1
Section sec_2
Section sec_3
Section sec_3.1
Table tab_a
Figure fig_1
Section sec_3.2
Section sec_3.3
Section sec_3.4
Section sec_3.5
Section sec_3.6
Section sec_3.7
Section sec_3.8
Section sec_3.9
Section sec_3.10
Section sec_3.11
Section sec_3.12
Section sec_3.13
Section sec_3.14
Section sec_3.15
Section sec_3.16
Section sec_3.17
Section sec_3.18
Section sec_3.19
Section sec_3.20
Section sec_3.21
Section sec_3.22
Section sec_3.23
Section sec_3.24
Section sec_3.25
Section sec_3.25.1
Section sec_3.25.2
Section sec_3.25.3
Section sec_3.25.4
Section sec_3.26
Section sec_4
Section sec_4.1
Table tab_1
Section sec_4.2
Section sec_4.3
Section sec_4.3.1
Figure fig_2
Section sec_4.3.2
Figure fig_3
Figure fig_4
Section sec_4.3.3
Figure fig_5
Section sec_4.3.4
Figure fig_6
Section sec_4.3.5
Section sec_5
Section sec_5.1
Section sec_5.2
Section sec_5.3
Section sec_5.3.1
Section sec_5.3.1.1
Section sec_5.3.1.2
Section sec_5.3.2
Section sec_5.3.3
Section sec_5.4
Section sec_5.4.1
Section sec_5.4.2
Section sec_5.4.2.1
Section sec_5.4.2.2
Section sec_5.4.2.3
Section sec_5.4.3
Section sec_5.4.4
Section sec_5.5
Section sec_5.5.1
Section sec_5.5.2
Section sec_5.6
Section sec_6
Section sec_6.1
Section sec_6.2
Section sec_7
Section sec_8
Section sec_8.1
Section sec_8.2
Section sec_8.3
Section sec_8.4
Section sec_8.5
Annex sec_A
Annex sec_A.1
Annex sec_A.2
Reference ref_1
Reference ref_2
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Coding principles
4.1 BEP codes of loader cranes
4.2 Units of BEP code values
4.3 References for measurements
5 Coding of geometrical data and space requirements
5.1 Mounting positions of crane and auxiliary stabilizers
5.2 Dimensional interfaces for connections to sub-frame and chassis
5.3 Crane base dimensions, stabilizers, and lower space requirements
5.4 Boom system dimensions and space requirements above mounting plane
5.5 Crane slewing space requirements
5.6 Auxiliary stabilizer dimensions
6 Coding of masses
6.1 Mass points in transport position
6.2 Masses with distances in working mode for stability calculations
7 Coding of forces and moments
8 Coding of general crane data
8.1 General crane data
8.2 Mechanical interfaces
8.3 Hydraulics equipment and interfaces
8.4 Electrical/electronic equipment and interfaces
8.5 Load lifting attachments
Annex A (normative) XML coding related to this part of ISO 21308
Bibliography