ISO 20361:2015
Liquid pumps and pump units — Noise test code — Grades 2 and 3 of accuracy
ISO 20361:2015 specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration, and verification of the airborne noise emission of liquid pumps or pump units. It specifies the noise measurement methods and the operating and mounting conditions that shall be used for the test.
Noise emission characteristics include emission sound pressure levels at specified positions and the sound power level. The determination of these quantities is necessary for
- declaring the noise emission values, and
- purpose of noise control at source at the design stage.
The determination of these quantities is also necessary for comparing the noise emitted by liquid pumps on the market.
The use of ISO 20361:2015 ensures the reproducibility of the determination of the airborne noise-emission characteristics within specified limits determined by the grade of accuracy of the basic airborne noise measurement method used. Noise measurement methods according to ISO 20361:2015 are engineering methods (grade 2) and survey methods (grade 3).
ISO 20361:2015 does not deal with the characterization of the structure-borne sound and liquid-borne noise generated by liquid pumps.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$118.26 NZD
|
|
| HardCopy |
$152.17 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Redline PDF |
$118.26 NZD
|
|
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Pump family and pump configuration
5 Sound power level determination
5.1 General
5.2 Specific considerations for reference box, measurement surface, position of microphones, and intensity probe
5.2.1 General
5.2.2 Reference box
5.2.3 Measurement surface and microphone positions
5.2.4 Position of microphones and intensity probes
6 Emission sound pressure level determination
6.1 Basic standard to be used
6.2 Relevant work station
6.3 Measurement uncertainty
7 Installation and mounting conditions
7.1 General
7.2 Noise test situation
7.2.1 General
7.2.2 Test on site
7.2.3 Test on shop test stand
7.2.4 Test on a specific facility intended for acoustic measurement
8 Operating conditions during noise measurement
8.1 General
8.2 Pumped liquid
8.3 NPSHA value
9 Information to be recorded
9.1 General
9.2 Test report
10 Declaration and verification of noise emission values
Annex A (normative) Pump alone — Measurement surface
Annex B (normative) Pump units — Microphone positions for sound pressure level measurement on the measurement surface for different pump types and sizes
Bibliography
Previous versions
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
AS/NZS 60335.2.51:2020 (Excludes IEC Text)
Household and similar electrical appliances - Safety - Part 2.51: Particular requirements for stationary circulation pumps for heating and service water installations -
AS/NZS 60335.2.51:2020 (Includes IEC Text)
Household and similar electrical appliances - Safety - Part 2.51: Particular requirements for stationary circulation pumps for heating and service water installations -
AS/NZS 60335.2.67:2013 (Excludes IEC text)
Household and similar electrical appliances - Safety - Part 2.67: Particular requirements for floor treatment machines, for commercial use -
AS/NZS 60335.2.67:2013 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.67: Particular requirements for floor treatment machines, for commercial use
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Pump family and pump configuration
5 Sound power level determination
5.1 General
5.2 Specific considerations for reference box, measurement surface, position of microphones, and intensity probe
5.2.1 General
5.2.2 Reference box
5.2.3 Measurement surface and microphone positions
5.2.4 Position of microphones and intensity probes
6 Emission sound pressure level determination
6.1 Basic standard to be used
6.2 Relevant work station
6.3 Measurement uncertainty
7 Installation and mounting conditions
7.1 General
7.2 Noise test situation
7.2.1 General
7.2.2 Test on site
7.2.3 Test on shop test stand
7.2.4 Test on a specific facility intended for acoustic measurement
8 Operating conditions during noise measurement
8.1 General
8.2 Pumped liquid
8.3 NPSHA value
9 Information to be recorded
9.1 General
9.2 Test report
10 Declaration and verification of noise emission values
Annex A (normative) Pump alone — Measurement surface
Annex B (normative) Pump units — Microphone positions for sound pressure level measurement on the measurement surface for different pump types and sizes
Bibliography