ISO 19932-1:2013
Equipment for crop protection — Knapsack sprayers — Part 1: Safety and environmental requirements
ISO 19932-1:2013 specifies the safety and environmental requirements and their means of verification for the design and construction of knapsack sprayers carried on the back or shoulder of the operator for use with plant protection products. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
It is applicable to lever-operated knapsack sprayers, knapsack compression sprayers and knapsack sprayers driven by an engine or electric motor using hydraulic pressure atomisation of the spray liquid, with a nominal volume of more than 3 l, for their intended use primarily in agriculture and horticulture.
It does not apply to knapsack mistblowers according to ISO 28139.
ISO 19932-1:2013 deals with all significant hazards, hazardous situations and hazardous events relevant to knapsack sprayers when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, excepting the hazards arising from: static electricity; explosion or fire from chemicals for spraying; and insufficient structural integrity.
ISO 19932-1:2013 is not applicable to knapsack sprayers which are manufactured before the date of its publication.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$179.13 NZD
|
|
| HardCopy |
$214.78 NZD
|
|
| Networkable PDF |
Price varies
|
Section sec_1
Section sec_2
Section sec_3
Section sec_3.1
Section sec_3.2
Section sec_3.3
Section sec_4
Section sec_4.1
Section sec_4.1.1
Section sec_4.1.2
Section sec_4.1.3
Section sec_4.1.4
Section sec_4.1.5
Section sec_4.1.6
Section sec_4.1.7
Section sec_4.1.8
Section sec_4.1.9
Section sec_4.1.10
Section sec_4.1.11
Section sec_4.1.12
Section sec_4.2
Section sec_4.2.1
Section sec_4.2.2
Section sec_4.2.3
Section sec_4.2.4
Section sec_4.2.5
Section sec_4.3
Section sec_4.3.1
Section sec_4.3.2
Section sec_4.3.3
Section sec_4.3.4
Section sec_4.3.5
Section sec_4.3.6
Section sec_4.4
Section sec_4.4.1
Section sec_4.4.2
Section sec_4.4.3
Section sec_4.4.4
Section sec_4.5
Section sec_4.5.1
Section sec_4.5.2
Section sec_4.5.3
Section sec_4.6
Section sec_4.6.1
Section sec_4.6.2
Section sec_4.7
Section sec_4.7.1
Section sec_4.7.2
Section sec_4.7.3
Section sec_4.7.4
Section sec_4.7.5
Section sec_4.7.6
Section sec_5
Section sec_5.1
Section sec_5.1.1
Section sec_5.1.2
Section sec_5.2
Section sec_5.2.1
Section sec_5.2.2
Section sec_5.2.3
Section sec_5.2.4
Section sec_5.2.5
Section sec_6
Section sec_6.1
Section sec_6.1.1
Section sec_6.2
Section sec_6.2.1
Section sec_6.2.2
Section sec_6.2.3
Section sec_6.2.4
Section sec_6.2.5.
Section sec_6.2.6
Section sec_6.3
Section sec_6.3.1
Section sec_6.3.2
Section sec_6.4
Section sec_6.5
Section sec_6.5.1
Section sec_6.5.2
Section sec_6.5.3
Section sec_6.6
Figure fig_1
Section sec_6.7
Section sec_6.8
Section sec_6.9
Section sec_6.10
Section sec_6.11
Section sec_7
Section sec_7.1
Section sec_7.1.1
Section sec_7.1.2
Section sec_7.2
Section sec_7.3
Section sec_7.3.1
Section sec_7.3.2
Section sec_7.3.3
Section sec_8
Section sec_8.1
Section sec_8.1.1
Section sec_8.1.2
Section sec_8.1.2.1
Section sec_8.1.2.2
Section sec_8.2
Section sec_8.3
Annex sec_A
Table tab_A.1
Reference ref_1
Reference ref_2
Reference ref_3
Reference ref_4
Reference ref_5
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
4.1 General
4.2 Harness
4.3 Spray tank
4.4 Controls
4.5 Hoses
4.6 Filters
4.7 Spray lance and nozzles
5 Specific requirements for lever-operated knapsack sprayers
5.1 General
5.2 Spray tank
6 Specific requirements for engine- or motor-driven knapsack sprayers
6.1 General
6.2 Spray tank
6.3 Controls
6.4 Power-driven components
6.5 Fuel tank
6.6 Hot parts
6.7 Exhaust system
6.8 Parts under high voltage
6.9 Electromagnetic immunity
6.10 Noise
6.11 Vibration
7 Specific requirements for compression sprayers
7.1 General
7.2 Harness
7.3 Spray tank
8 Information for use
8.1 Instruction handbook
8.2 Marking
8.3 Warnings
Annex A (informative) List of significant hazards
Bibliography
Previous versions
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
BS 6356-1:1997
Spraying equipment for crop protection, Method of test for sprayer nozzles
-
BS 6356-11:1997
Spraying equipment for crop protection, Agricultural sprayers. Determination of the volume of total residual
-
BS 6356-13:1997
Spraying equipment for crop protection, Air-assisted sprayers. Dimensions of nozzle swivel nuts
-
BS 6356-15:1997
Spraying equipment for crop protection, Typical layout
Section sec_1
Section sec_2
Section sec_3
Section sec_3.1
Section sec_3.2
Section sec_3.3
Section sec_4
Section sec_4.1
Section sec_4.1.1
Section sec_4.1.2
Section sec_4.1.3
Section sec_4.1.4
Section sec_4.1.5
Section sec_4.1.6
Section sec_4.1.7
Section sec_4.1.8
Section sec_4.1.9
Section sec_4.1.10
Section sec_4.1.11
Section sec_4.1.12
Section sec_4.2
Section sec_4.2.1
Section sec_4.2.2
Section sec_4.2.3
Section sec_4.2.4
Section sec_4.2.5
Section sec_4.3
Section sec_4.3.1
Section sec_4.3.2
Section sec_4.3.3
Section sec_4.3.4
Section sec_4.3.5
Section sec_4.3.6
Section sec_4.4
Section sec_4.4.1
Section sec_4.4.2
Section sec_4.4.3
Section sec_4.4.4
Section sec_4.5
Section sec_4.5.1
Section sec_4.5.2
Section sec_4.5.3
Section sec_4.6
Section sec_4.6.1
Section sec_4.6.2
Section sec_4.7
Section sec_4.7.1
Section sec_4.7.2
Section sec_4.7.3
Section sec_4.7.4
Section sec_4.7.5
Section sec_4.7.6
Section sec_5
Section sec_5.1
Section sec_5.1.1
Section sec_5.1.2
Section sec_5.2
Section sec_5.2.1
Section sec_5.2.2
Section sec_5.2.3
Section sec_5.2.4
Section sec_5.2.5
Section sec_6
Section sec_6.1
Section sec_6.1.1
Section sec_6.2
Section sec_6.2.1
Section sec_6.2.2
Section sec_6.2.3
Section sec_6.2.4
Section sec_6.2.5.
Section sec_6.2.6
Section sec_6.3
Section sec_6.3.1
Section sec_6.3.2
Section sec_6.4
Section sec_6.5
Section sec_6.5.1
Section sec_6.5.2
Section sec_6.5.3
Section sec_6.6
Figure fig_1
Section sec_6.7
Section sec_6.8
Section sec_6.9
Section sec_6.10
Section sec_6.11
Section sec_7
Section sec_7.1
Section sec_7.1.1
Section sec_7.1.2
Section sec_7.2
Section sec_7.3
Section sec_7.3.1
Section sec_7.3.2
Section sec_7.3.3
Section sec_8
Section sec_8.1
Section sec_8.1.1
Section sec_8.1.2
Section sec_8.1.2.1
Section sec_8.1.2.2
Section sec_8.2
Section sec_8.3
Annex sec_A
Table tab_A.1
Reference ref_1
Reference ref_2
Reference ref_3
Reference ref_4
Reference ref_5
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
4.1 General
4.2 Harness
4.3 Spray tank
4.4 Controls
4.5 Hoses
4.6 Filters
4.7 Spray lance and nozzles
5 Specific requirements for lever-operated knapsack sprayers
5.1 General
5.2 Spray tank
6 Specific requirements for engine- or motor-driven knapsack sprayers
6.1 General
6.2 Spray tank
6.3 Controls
6.4 Power-driven components
6.5 Fuel tank
6.6 Hot parts
6.7 Exhaust system
6.8 Parts under high voltage
6.9 Electromagnetic immunity
6.10 Noise
6.11 Vibration
7 Specific requirements for compression sprayers
7.1 General
7.2 Harness
7.3 Spray tank
8 Information for use
8.1 Instruction handbook
8.2 Marking
8.3 Warnings
Annex A (informative) List of significant hazards
Bibliography