ISO 19225:2017
Underground mining machines — Mobile extracting machines at the face — Safety requirements for shearer loaders and plough systems
ISO 19225:2017 specifies safety requirements to minimize the hazards listed in Clause 4 that can occur during the assembly, use, maintenance, repair, decommissioning, disassembly and disposal of shearer loaders and plough systems when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, in underground mining.
ISO 19225:2017 does not cover any hazards resulting from explosive atmospheres. Requirements for explosive atmospheres can be found in ISO/IEC 80079‑38.
ISO 19225:2017 is not applicable to machines that are manufactured before the date of its publication.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$288.00 NZD
|
|
| HardCopy |
$340.88 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective measures
5.1 General
5.2 Contact surfaces
5.2.1 Sharp corners and edges
5.2.2 Hot surfaces
5.3 Stability
5.4 Control devices and systems
5.4.1 General requirements
5.4.2 Safety and reliability of control systems
5.4.3 Design of control systems
5.4.4 Failure of power supply
5.4.5 Remote control
5.4.6 Radio control
5.4.7 Automatic control
5.4.8 Measures to prevent inadvertent movements
5.5 Falling objects and ejected material
5.6 Dust control
5.6.1 General
5.6.2 Dust reduction
5.6.3 Dust suppression
5.7 Noise
5.7.1 General
5.7.2 Noise reduction at the source at the design stage
5.8 Electrical requirements
5.8.1 General
5.8.2 Control of electrical power supply
5.8.3 Monitoring of circuits
5.8.4 Cables
5.8.5 Bonding
5.8.6 Lighting
5.9 Mechanical requirements
5.9.1 General
5.9.2 Chains
5.9.3 Gearboxes
5.10 Hydraulic systems and water systems
5.10.1 Hydraulic systems
5.10.2 Water systems
5.11 Fire protection
5.12 Load attachment points
5.13 Maintenance and repair
6 Verification of the safety requirements and/or protective measures
7 Information for use
7.1 General
7.2 Signals and warning devices
7.3 Accompanying documents
7.3.1 General
7.3.2 Information for transportation, handling and storage
7.3.3 Information for assembly and commissioning
7.3.4 Information about the machine
7.3.5 Information for operational use
7.3.6 Information on maintenance and repairs
7.3.7 Information for decommissioning, dismantling and disposal
7.3.8 Information for emergencies
7.4 Marking
Annex A (normative) Noise test code
Bibliography
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
BS 4019-3:1993
Rotary core drilling equipment, Specification for System A. Metric units
-
BS 4019-4:1993
Rotary core drilling equipment., Specification for System A. Inch units
-
BS 4019-5:1999
Rotary core drilling equipment, Rotary core drilling equipment. Specification for wireline diamond drilling equipment. System A. Metric units
-
BS EN 12321:2003+A1:2009
Underground mining machinery. Specification for the safety requirements of armoured face conveyors
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective measures
5.1 General
5.2 Contact surfaces
5.2.1 Sharp corners and edges
5.2.2 Hot surfaces
5.3 Stability
5.4 Control devices and systems
5.4.1 General requirements
5.4.2 Safety and reliability of control systems
5.4.3 Design of control systems
5.4.4 Failure of power supply
5.4.5 Remote control
5.4.6 Radio control
5.4.7 Automatic control
5.4.8 Measures to prevent inadvertent movements
5.5 Falling objects and ejected material
5.6 Dust control
5.6.1 General
5.6.2 Dust reduction
5.6.3 Dust suppression
5.7 Noise
5.7.1 General
5.7.2 Noise reduction at the source at the design stage
5.8 Electrical requirements
5.8.1 General
5.8.2 Control of electrical power supply
5.8.3 Monitoring of circuits
5.8.4 Cables
5.8.5 Bonding
5.8.6 Lighting
5.9 Mechanical requirements
5.9.1 General
5.9.2 Chains
5.9.3 Gearboxes
5.10 Hydraulic systems and water systems
5.10.1 Hydraulic systems
5.10.2 Water systems
5.11 Fire protection
5.12 Load attachment points
5.13 Maintenance and repair
6 Verification of the safety requirements and/or protective measures
7 Information for use
7.1 General
7.2 Signals and warning devices
7.3 Accompanying documents
7.3.1 General
7.3.2 Information for transportation, handling and storage
7.3.3 Information for assembly and commissioning
7.3.4 Information about the machine
7.3.5 Information for operational use
7.3.6 Information on maintenance and repairs
7.3.7 Information for decommissioning, dismantling and disposal
7.3.8 Information for emergencies
7.4 Marking
Annex A (normative) Noise test code
Bibliography