ISO 18927:2002
Imaging materials — Recordable compact disc systems — Method for estimating the life expectancy based on the effects of temperature and relative humidity
This International Standard specifies a test method for estimating the life expectancy of information stored on recordable compact disc systems. Only the effects of temperature and relative humidity on the media are considered.
This International Standard does not cover the effects of light, air pollution or time-dependent flow phenomena.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$118.26 NZD
|
|
| HardCopy |
$152.17 NZD
|
|
| Networkable PDF |
Price varies
|
TitlePage - Imaging materials— Recordable compact disc systems— Method for estimating the life ...
TableofContent - Contents Page
Foreword - Foreword
Scope - 1 Scope
NormativeReference - 2 Normative references
Clause1 - 4 Purpose and assumptions
Subclause2 - 4.1 Purpose
Subclause2 - 4.2 Assumptions
Clause1 - 5 Measurements
Subclause2 - 5.1 Summary
Subclause2 - 5.2 BLER
Subclause2 - 5.3 Test equipment
Subclause3 - 5.3.1 General requirements
Subclause3 - 5.3.2 Calibration and repeatability
Subclause2 - 5.4 Test specimen
Subclause3 - 5.4.1 General requirements
Subclause3 - 5.4.2 Specimen selection
Subclause3 - 5.4.3 Recording system
Subclause3 - 5.4.4 Ambient recording conditions
Subclause3 - 5.4.5 Recording method
Clause1 - 6 Accelerated stress test plan
Subclause2 - 6.1 General
Subclause2 - 6.2 Stress conditions
Subclause3 - 6.2.1 General
Subclause3 - 6.2.2 Temperature
Subclause3 - 6.2.3 Relative humidity (RH)
Subclause3 - 6.2.4 Rate of stress change
Subclause3 - 6.2.5 Independent verification of chamber conditions
Subclause3 - 6.2.6 Specimen placement
Subclause3 - 6.2.7 Other influences
Subclause2 - 6.3 Accelerated test cell sample population
Subclause2 - 6.4 Time intervals
Subclause2 - 6.5 Test plan
Subclause2 - 6.6 Measurement conditions
Clause1 - 7 Data evaluation
Subclause2 - 7.1 Lognormal distribution model
Subclause3 - 7.1.1 General
Subclause3 - 7.1.2 Model validity
Subclause2 - 7.2 Eyring acceleration model
Subclause2 - 7.3 Acceleration factors
Subclause2 - 7.4 Survivor analysis
Subclause2 - 7.5 Aids
Clause1 - 8 Disclaimer
AnnexInformative - Numbering system for related International Standards
AnnexInformative - Ten-step analysis outline
AnnexInformative - Example of test plan and data analysis
Bibliography - Bibliography
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
AS/NZS 4577:1999
Micrographics - Readers for transparent microforms - Performance characteristics
-
AS/NZS 4578:1999
Micrographics - Readers for transparent microforms - Measurement of characteristics
-
AS/NZS 4579:1999
Micrographics - Reader-printers for transparent microforms - Characteristics
-
AS/NZS ISO 12029:2014
Document management - Machine-readable paper forms - Optimal design for user friendliness and electronic document management systems (EDMS)
TitlePage - Imaging materials— Recordable compact disc systems— Method for estimating the life ...
TableofContent - Contents Page
Foreword - Foreword
Scope - 1 Scope
NormativeReference - 2 Normative references
Clause1 - 4 Purpose and assumptions
Subclause2 - 4.1 Purpose
Subclause2 - 4.2 Assumptions
Clause1 - 5 Measurements
Subclause2 - 5.1 Summary
Subclause2 - 5.2 BLER
Subclause2 - 5.3 Test equipment
Subclause3 - 5.3.1 General requirements
Subclause3 - 5.3.2 Calibration and repeatability
Subclause2 - 5.4 Test specimen
Subclause3 - 5.4.1 General requirements
Subclause3 - 5.4.2 Specimen selection
Subclause3 - 5.4.3 Recording system
Subclause3 - 5.4.4 Ambient recording conditions
Subclause3 - 5.4.5 Recording method
Clause1 - 6 Accelerated stress test plan
Subclause2 - 6.1 General
Subclause2 - 6.2 Stress conditions
Subclause3 - 6.2.1 General
Subclause3 - 6.2.2 Temperature
Subclause3 - 6.2.3 Relative humidity (RH)
Subclause3 - 6.2.4 Rate of stress change
Subclause3 - 6.2.5 Independent verification of chamber conditions
Subclause3 - 6.2.6 Specimen placement
Subclause3 - 6.2.7 Other influences
Subclause2 - 6.3 Accelerated test cell sample population
Subclause2 - 6.4 Time intervals
Subclause2 - 6.5 Test plan
Subclause2 - 6.6 Measurement conditions
Clause1 - 7 Data evaluation
Subclause2 - 7.1 Lognormal distribution model
Subclause3 - 7.1.1 General
Subclause3 - 7.1.2 Model validity
Subclause2 - 7.2 Eyring acceleration model
Subclause2 - 7.3 Acceleration factors
Subclause2 - 7.4 Survivor analysis
Subclause2 - 7.5 Aids
Clause1 - 8 Disclaimer
AnnexInformative - Numbering system for related International Standards
AnnexInformative - Ten-step analysis outline
AnnexInformative - Example of test plan and data analysis
Bibliography - Bibliography