ISO 14137:2015
Test conditions for wire electrical-discharge machines (wire EDM) — Testing of the accuracy
ISO 14137:2015, with reference to ISO 230‑1, ISO 230‑2, and ISO 230‑4, geometric tests, tests of accuracy and repeatability of numerically controlled positioning axes, machining test and circular test for general purpose and normal-accuracy wire electro-discharge machines (wire EDM). It also specifies the applicable tolerances, corresponding to the above-mentioned tests.
ISO 14137:2015 is applicable to cross-slide table type machines and double-column type machines.
ISO 14137:2015 deals only with the verification of accuracy of the machine. It does not apply to the testing of the machine operation (vibrations, abnormal noises, stick-slip motion of components, etc.) nor to the checking of its characteristics (such as speeds, feeds, etc.), which should generally be checked before the testing of the accuracy.
ISO 14137:2015 provides the terminology used for the principal components of the machine and the designation of the axes with reference to ISO 841.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$240.87 NZD
|
|
| HardCopy |
$277.39 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Terminology and designation of axes
4.1 Cross-slide table type
4.2 Double-column type
5 Preliminary remarks
5.1 Measurement units
5.2 Reference to ISO 230‑1
5.3 Machine levelling
5.4 Testing sequence
5.5 Tests to be performed
5.6 Measuring instruments
5.7 Diagrams
5.8 Software compensation
5.9 Minimum tolerance
5.10 Positioning tests and reference to ISO 230‑2
5.11 Machining test
5.12 Circular test and reference to ISO 230‑4
6 Geometric tests
6.1 Linear axes of motion
6.2 Workholding frame
6.3 Motion of U- and V-axes
7 Checking of accuracy and repeatability of numerically controlled positioning axes
8 Machining test
9 Circular test
Bibliography
Previous versions
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
BS 4656-26:1980
Accuracy of machine tools and methods of test, Gear shaping machines
-
BS ISO 14137:2015
Test conditions for wire electrical-discharge machines (wire EDM). Testing of the accuracy
-
BS ISO 14137:2015 - TC
Tracked Changes. Test conditions for wire electrical-discharge machines (wire EDM). Testing of the accuracy
-
BS ISO 2351-1:2007
Assembly tools for screws and nuts. Machine-operated screwdriver bits, Screwdriver bits for slotted head screws
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Terminology and designation of axes
4.1 Cross-slide table type
4.2 Double-column type
5 Preliminary remarks
5.1 Measurement units
5.2 Reference to ISO 230‑1
5.3 Machine levelling
5.4 Testing sequence
5.5 Tests to be performed
5.6 Measuring instruments
5.7 Diagrams
5.8 Software compensation
5.9 Minimum tolerance
5.10 Positioning tests and reference to ISO 230‑2
5.11 Machining test
5.12 Circular test and reference to ISO 230‑4
6 Geometric tests
6.1 Linear axes of motion
6.2 Workholding frame
6.3 Motion of U- and V-axes
7 Checking of accuracy and repeatability of numerically controlled positioning axes
8 Machining test
9 Circular test
Bibliography