ISO 13953:2001
Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
This International Standard describes a test method for determination of the tensile strength and tensile failure mode
of butt-fused polyethylene (PE) pipe assemblies.
The method is applicable to butt-fused joints between PE pipes with a nominal outside diameter of not less than 90mm.
.
The method may be used, together with other test methods, to evaluate the quality of the butt-fused joints.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$83.00 NZD
|
|
| Networkable PDF |
Price varies
|
Polyethylene (PE) pipes and fittings— Determination of the tensile strength and failure mode of ...
Contents Page
Foreword
Polyethylene (PE) pipes and fittings— Determination of the tensile strength and failure mode of ...
1 Scope
2 Normative reference
3 Principle
4 Apparatus
4.1 Room
4.2 Tensile-testing machine
4.3 Clamping device
4.4 Measuring devices
4.5 Template with the geometry of the test piece
5 Test pieces
5.1 Sampling
5.2 Preparation
5.2.1 General
5.2.2 Type A test piece
5.2.3 Type B test piece
5.3 Number of test pieces
6 Conditioning
7 Procedure
7.1 Measure the thickness of the test piece as the thickness of the pipe wall and the width of...
7.2 Place the test piece in the clamping device of the tensile-testing machine, so that the di...
7.3 Apply tension to the test piece with a cross-head speed of
7.4 Record the force applied during extension until complete failure of the test piece.
7.5 Record the maximum force applied (in newtons) and the type of failure as ductile or brittl...
7.6 Calculate the tensile strength as the maximum recorded tensile force (in newtons) divided ...
8 Test report
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 2642.3:2008
Polybutylene (PB) plumbing pipe systems - Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications -
AS/NZS 2642.3:2008 A1
Polybutylene (PB) plumbing pipe systems - Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications: Amendment 1:2018 -
AS/NZS 3499:2006
Water supply - Flexible hose assemblies
-
AS/NZS 3499:2006 A1
Water supply - Flexible hose assemblies: Amendment 1
Polyethylene (PE) pipes and fittings— Determination of the tensile strength and failure mode of ...
Contents Page
Foreword
Polyethylene (PE) pipes and fittings— Determination of the tensile strength and failure mode of ...
1 Scope
2 Normative reference
3 Principle
4 Apparatus
4.1 Room
4.2 Tensile-testing machine
4.3 Clamping device
4.4 Measuring devices
4.5 Template with the geometry of the test piece
5 Test pieces
5.1 Sampling
5.2 Preparation
5.2.1 General
5.2.2 Type A test piece
5.2.3 Type B test piece
5.3 Number of test pieces
6 Conditioning
7 Procedure
7.1 Measure the thickness of the test piece as the thickness of the pipe wall and the width of...
7.2 Place the test piece in the clamping device of the tensile-testing machine, so that the di...
7.3 Apply tension to the test piece with a cross-head speed of
7.4 Record the force applied during extension until complete failure of the test piece.
7.5 Record the maximum force applied (in newtons) and the type of failure as ductile or brittl...
7.6 Calculate the tensile strength as the maximum recorded tensile force (in newtons) divided ...
8 Test report