ISO 13643-3:2013
Ships and marine technology — Manoeuvring of ships — Part 3: Yaw stability and steering
ISO 13643-3:2013 defines symbols and terms and provides guidelines for the conduct of tests to give evidence about the yaw stability and steering of surface ships, submarines, and models. It is meant to be read in conjunction with ISO 13643-1:2013.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$118.26 NZD
|
|
| HardCopy |
$152.17 NZD
|
|
| Networkable PDF |
Price varies
|
Section sec_1
Section sec_2
Section sec_3
Section sec_3.1
Section sec_3.2
Section sec_3.3
Section sec_3.4
Section sec_3.5
Section sec_3.6
Section sec_3.7
Section sec_3.8
Section sec_3.9
Section sec_4
Table tab_1
Section sec_5
Section sec_6
Section sec_6.1
Table tab_a
Figure fig_1
Section sec_6.2
Section sec_6.3
Section sec_7
Section sec_7.1
Section sec_7.2
Section sec_7.3
Figure fig_2
Figure fig_3
Section sec_7.4
Section sec_8
Section sec_8.1
Section sec_8.2
Section sec_8.3
Figure fig_4
Figure fig_5
Section sec_8.4
Section sec_9
Section sec_9.1
Section sec_9.2
Section sec_9.3
Figure fig_6
Section sec_9.4
Section sec_10
Section sec_10.1
Section sec_10.2
Section sec_10.2.1
Figure fig_7
Section sec_10.2.2
Figure fig_8
Section sec_10.3
Section sec_10.3.1
Section sec_10.3.2
Section sec_10.4
Section sec_10.4.1
Section sec_10.4.2
Section sec_11
Section sec_11.1
Section sec_11.2
Table tab_f
Figure fig_9
Section sec_11.3
Table tab_g
Figure fig_10
Table tab_h
Figure fig_11
Section sec_11.4
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Test-related physical quantities
5 General test conditions
6 Test 3.1 — Pull-out test
6.1 General
6.2 Analysis and presentation of results of a pull-out test
6.3 Designation of a pull-out test
7 Test 3.2 — Direct spiral test (according to Dieudonné)
7.1 General
7.2 Description
7.3 Analysis and presentation of results of a direct spiral test (according to Dieudonné)
7.4 Designation of a direct spiral test (according to Dieudonné)
8 Test 3.3 — Reverse spiral test (according to Bech)
8.1 General
8.2 Description
8.3 Analysis and presentation of results of a reverse spiral test (according to Bech)
8.4 Designation of a reverse spiral test (according to Bech)
9 Test 3.4 — Weave test
9.1 General
9.2 Description
9.3 Analysis and presentation of results of a weave test
9.4 Designation of a weave test
10 Test 3.5 — Astern test
10.1 General
10.2 Description
10.3 Analysis and presentation of results of an astern test
10.4 Designation of an astern test
11 Test 3.6 — Sine test
11.1 General
11.2 Description
11.3 Analysis and presentation of results of a sine test
11.4 Designation of a sine test
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
AS/NZS 4869.1:2006
Maritime Survivor Locating Systems (MSLS) - Operating on 121.5 MHz
-
AS/NZS 61097.12:2008
Global maritime distress and safety system (GMDSS) - Survival craft portable two-way VHF radiotelephone apparatus - Operational and performance requirements, methods of testing and required test results
-
AS/NZS 62320.1:2015
Maritime navigation and radiocommunication equipment and systems - Automatic identification system (AIS) - Part 1: AIS Base Stations - Minimum operational and performance requirements, methods of testing and required test results -
AS/NZS 62320.3:2015
Maritime navigation and radiocommunication equipment and systems - Automatic identification system (AIS) - Part 3: Repeater stations - Minimum operational and performance requirements - Methods of test and required test results
Section sec_1
Section sec_2
Section sec_3
Section sec_3.1
Section sec_3.2
Section sec_3.3
Section sec_3.4
Section sec_3.5
Section sec_3.6
Section sec_3.7
Section sec_3.8
Section sec_3.9
Section sec_4
Table tab_1
Section sec_5
Section sec_6
Section sec_6.1
Table tab_a
Figure fig_1
Section sec_6.2
Section sec_6.3
Section sec_7
Section sec_7.1
Section sec_7.2
Section sec_7.3
Figure fig_2
Figure fig_3
Section sec_7.4
Section sec_8
Section sec_8.1
Section sec_8.2
Section sec_8.3
Figure fig_4
Figure fig_5
Section sec_8.4
Section sec_9
Section sec_9.1
Section sec_9.2
Section sec_9.3
Figure fig_6
Section sec_9.4
Section sec_10
Section sec_10.1
Section sec_10.2
Section sec_10.2.1
Figure fig_7
Section sec_10.2.2
Figure fig_8
Section sec_10.3
Section sec_10.3.1
Section sec_10.3.2
Section sec_10.4
Section sec_10.4.1
Section sec_10.4.2
Section sec_11
Section sec_11.1
Section sec_11.2
Table tab_f
Figure fig_9
Section sec_11.3
Table tab_g
Figure fig_10
Table tab_h
Figure fig_11
Section sec_11.4
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Test-related physical quantities
5 General test conditions
6 Test 3.1 — Pull-out test
6.1 General
6.2 Analysis and presentation of results of a pull-out test
6.3 Designation of a pull-out test
7 Test 3.2 — Direct spiral test (according to Dieudonné)
7.1 General
7.2 Description
7.3 Analysis and presentation of results of a direct spiral test (according to Dieudonné)
7.4 Designation of a direct spiral test (according to Dieudonné)
8 Test 3.3 — Reverse spiral test (according to Bech)
8.1 General
8.2 Description
8.3 Analysis and presentation of results of a reverse spiral test (according to Bech)
8.4 Designation of a reverse spiral test (according to Bech)
9 Test 3.4 — Weave test
9.1 General
9.2 Description
9.3 Analysis and presentation of results of a weave test
9.4 Designation of a weave test
10 Test 3.5 — Astern test
10.1 General
10.2 Description
10.3 Analysis and presentation of results of an astern test
10.4 Designation of an astern test
11 Test 3.6 — Sine test
11.1 General
11.2 Description
11.3 Analysis and presentation of results of a sine test
11.4 Designation of a sine test