ISO 1288-1:2016
Glass in building — Determination of the bending strength of glass — Part 1: Fundamentals of testing glass
ISO 1288-1:2016 specifies the determination of the bending strength of monolithic glass for use in buildings. The testing of insulating units or laminated glass is excluded from this part of ISO 1288.
ISO 1288-1:2016 describes
- considerations to be taken into account when testing glass,
- explanations of the reasons for designing different test methods,
- limitations of the test methods, and
- gives pointers to safety requirements for the personnel operating the test equipment.
ISO 1288‑2, ISO 1288‑3, ISO 1288‑4 and ISO 1288‑5 specify test methods in detail.
The test methods specified in this part of ISO 1288 are intended to provide large numbers of bending strength values that can be used as the basis for statistical evaluation of glass strength.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$190.00 NZD
|
|
| HardCopy |
$238.00 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Factors to be taken into account when testing glass
5.1 Glass as a material
5.1.1 General
5.1.2 Effect of surface condition
5.1.3 Effect of rate of loading
5.1.4 Effect of test surface area
5.1.5 Effect of ambient medium
5.1.6 Effect of aging
5.1.7 Effect of temperature
5.2 Bending stress and bending strength
5.2.1 General
5.2.2 Effective stress
5.2.3 Equivalent bending strength
5.2.4 Profile bending strength
5.3 Types of glass
5.3.1 General
5.3.2 Patterned glass
5.3.3 Laminated glass
5.4 Orientation of the specimens
5.5 Number of specimens in a sample
6 Explanations of the test methods
6.1 Coaxial double ring test for large test surface areas
6.1.1 Elimination of edge effects
6.1.2 Analysis of the stress development
6.1.3 Testing of patterned glass
6.2 Test with specimen supported at two points (four point bending)
6.1.4 Limitations
6.1.5 Inclusion of edge effects
6.1.6 Analysis of the stress development
6.3 Coaxial double ring test for small test surface areas
6.1.7 Elimination of edge effects
6.1.8 Analysis of the stress development
7 Range of application of the test methods
7.1 General limitations
7.2 Limitations to ISO 1288‑2
7.3 Limitations to ISO 1288‑3
7.4 Limitations to ISO 1288‑4
7.5 Limitations to ISO 1288‑5
8 Calibration of the testing machines
9 Recommendations for safe use of test equipment
Bibliography
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 2208:1996
Safety glazing materials in buildings
-
AS/NZS 2208:1996 A1
Safety glazing materials in buildings: Amendment 1
-
AS/NZS 4667:2000
Quality requirements for cut-to-size and processed glass
-
BS 5051-1:1988
Bullet-resistant glazing, Specification for glazing for interior use
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Factors to be taken into account when testing glass
5.1 Glass as a material
5.1.1 General
5.1.2 Effect of surface condition
5.1.3 Effect of rate of loading
5.1.4 Effect of test surface area
5.1.5 Effect of ambient medium
5.1.6 Effect of aging
5.1.7 Effect of temperature
5.2 Bending stress and bending strength
5.2.1 General
5.2.2 Effective stress
5.2.3 Equivalent bending strength
5.2.4 Profile bending strength
5.3 Types of glass
5.3.1 General
5.3.2 Patterned glass
5.3.3 Laminated glass
5.4 Orientation of the specimens
5.5 Number of specimens in a sample
6 Explanations of the test methods
6.1 Coaxial double ring test for large test surface areas
6.1.1 Elimination of edge effects
6.1.2 Analysis of the stress development
6.1.3 Testing of patterned glass
6.2 Test with specimen supported at two points (four point bending)
6.1.4 Limitations
6.1.5 Inclusion of edge effects
6.1.6 Analysis of the stress development
6.3 Coaxial double ring test for small test surface areas
6.1.7 Elimination of edge effects
6.1.8 Analysis of the stress development
7 Range of application of the test methods
7.1 General limitations
7.2 Limitations to ISO 1288‑2
7.3 Limitations to ISO 1288‑3
7.4 Limitations to ISO 1288‑4
7.5 Limitations to ISO 1288‑5
8 Calibration of the testing machines
9 Recommendations for safe use of test equipment
Bibliography